Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT86E-SMX Compact in size, the Surface Mount, plastic packaged ACT86E-SMX is ideal for high density packing and automatic placement on circuit boards. The device has, as its core, a heat resisting cylinder type crystal which makes full use of AT cut crystal characteristics. This device can be used in a variety of applications such as Communications, Audio Visual, Measurement and Portable Equipments. The footprint is an industry standard layout and is compatible with other popular plastic crystals in this package. Specification Parameter Symbol Frequency Tolerance @25°C f/fo Temp Operating Range Topr Stability over Temp Range Tc Specification CAE (M4H) 3.579MHz ~ 50MHz -----------±30ppm & 50ppm -10°C ~ +60°C ±50ppm Standard. Frequency Range fo Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Drive Level Insulation Resistance Aging (First Year) -40°C ~ +85°C See table below 5pF max 7 ~ 32pF & SR 100±2 W 500M Min ±5ppm max Tstg ESR C0 Cl DL max IR Fa Condition CA PART:NOT FOR NEW BUILD, TO BE DISCONTINUED CA (M4E) 3.9MHz~ 32MHz Fundamental 30~70MHz 3rd O/T ±30ppm & 50ppm Please specify -10~+60°C, -40~+85°C Please specify ±50ppm (<6MHz) Please specify ±50ppm ,±30ppm (>6MHz) -55°C ~ +125°C @25°C See table below 7pF max 10~32pF & series Please specify 50~100µW 500M Min DC 100V±15V ±5ppm max @25°C ±3°C CAE CA Dimensions (mm) TAPE AND REEL (Standard Reel Size 1kpcs) CA: Nominal Dimensions (mm) ESR (Ω) max Frequency (MHz) ECA CA Mode 3.579 fo ~ < 3.999 180 200 4.000 fo ~ < 4.999 150 150 Fundamental 5.000 fo ~ < 5.999 100 150 Fundamental Fundamental 6.000 fo ~ < 6.999 100 100 Fundamental 7.000 fo ~ < 8.999 80 100 Fundamental 9.000 fo ~ < 9.99 60 100 Fundamental 10.000 fo ~ < 12.99 60 50 Fundamental 13.000 fo ~ < 19.99 50 50 Fundamental 20.000 fo ~ < 35.99 40 50 Fundamental 36.000 fo ~ < 50.00 40 50 Fundamental 30.00 fo ~ fo ~ < 36.00 -- 100 3rd O/T < 70.00 -- 80 3rd O/T 36.00 CAE: Dimensions (mm) Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature Range, Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue:5 M4H/M4E Date:22-02-2012 SERIES : ACT86E SMX Part numbering code is CA/ ECA Example : CAE M4H M4E M4H CAE CA (Note 4) Frequency To 99.9999MHz 1st four digits of Frequency & >99.9999MHz 1st five Digits of Frequency 1200 L K (12.000MHz ) (±50ppm) (±50ppm) E (-10+60) CAE RO F C (16pF) (Fund') (1K Reel ) - PF (RoHS) Tolerance (±pm) @ 25ºC I L 30 50 Operating Temperature Range (ºC) Std E G M Examples Stability Over Operating Temperature (ºC) 0983 = 9.8304MHz 1200 = 12.000MHz 9999 = 99.9999MHz K 30 O 50 Others available Enquire NB: It is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below -10+60 -20+70 -40+85 Std Load Capacitance ( pF or Series Resonance) DO 7 GO JO KO MO OO ZO PO RO TO VO AA BA DA EA SR 8 9 10 11 12 14 15 16 18 20 24 25 30 32 SR Mode F RoHS Comp' Fundamental - PF Package L = Loose C =1K Reels Full Example Part Number CA1200IKGROFC-PF 12.00MHz NOTES : 1) Tighter Tolerances and Stabilities and other Operating Temperature Ranges may be available. As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). 2) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. Such devices would normally be allocated a custom specification part number which is wholly customer specific. This would be MOQ dependent( EG : A 12.00MHz custom ACT86E SMX device may have a part number such as CA1200C- C1122-PF) 3) Frequencies below 10.000MHz are prefixed with a "0" (eg: 0900 = 9MHz. Whereas 10.000MHz is 1000 ) 4) NOT FOR NEW BUILD, TO BE DISCONTINUED ISO9001 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom http:www.actcrystals.com Issue:5 M4H/M4E Date:22-02-2012