ACT ACT711S_13

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT711S
The ACT711S is an ultra thin, plastic moulded package with a maximum height of 1.4 mm. The
package contains a highly reliable cylinder type quartz crystal and is ideally suitable for automatic
insertion, especially where PCB component mounting space is at a premium.
Applications include Wireless Communications Equipment, Pagers, PDAs, Cellular Phones, Portable
applications, and a variety of clock sources.
Specification
Parameter
Symbol
Specification
Frequency Range
Frequency Tolerance
Frequency v Temperature @25°C
Turnover Temperature
Temp. Coefficient
Temp Operating Range
Temp Storage Range
Equivalent Series Resistance
Shunt Capacitance
fo
∆f/fo
TC
Tp
K
Topr
Tstg
ESR
C0
32.768KHz
±20ppm, ±50ppm, ±100ppm
Please See Drawing
+25°C ±5°C
-8
(-3.5±1.0) x 10 /°C²
-40 ~+85°C
-55 ~ +125°C
65KΩ max
0.8pF typical
Load Capacitance
CL
12.5pF (7.0pF option)
Drive Level
Aging
Reflow Profile
DL max
Fa
Tsol
1.0µW ( 0.1µW Recommended )
±3ppm max 25°C ±3°C, First Year
260°C max x 5 secs x 2 times (max IR reflow)
Please specify
Please specify
The surface of the Cylinder crystal, within this device, may sometimes be exposed through the surface of the
moulded resin body; this in no way affects the operation or characteristics of the device.
Pad Plating Material SnBi
Please note that all parameters can not necessarily be specified in the same device
Customer to specify: Frequency Tolerance, Load capacitance
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 11 I3
Date: 13-02-2013
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT711S TAPE & REELING SPECIFICATION cont'd
REEL DIMENSIONS (mm)
CARRIER TAPE DIMENSIONS (mm)
Standard Reel Quantity 3.000
Tape Peel Strength:
Using method above the force to start the tape peeling with a pull speed of 300±10 mm/min shall be 0.1~1.3N.
ACT711S REFLOW SOLDERING PROFILE
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 11 I3
Date: 13-02-2013
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
[email protected]
ACT711S TAPE & REELING SPECIFICATION
Standard Reel Quantity 3.000
MATERIAL
Tape
Reel
A_PET
Cardboard
ORIENTATION IN CARRIER TAPE
LAYOUT OF TAPE
No Components
20 Pockets Minimum
Cover Tape Leader
150mm Minimum
Start of carrier tape bent vertically and hooked into reel slot.
COVER TAPE OVERLAP
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
Issue: 11 I3
Date: 13-02-2013
ACT711S WATCH CRYSTAL ( 32.768kHz ) - PART NUMBERING & COMMODITY CODE
Example :
SE
00003
G
I
H
D
(ACT711S)
(32.7680kHz )
(±20ppm)
(-40+85)
(12.5pF)
(3K Reel )
- PF
(RoHS)
Device Series
Code
Frequency
To 999.9999kHz
711S = SE
1st five digits of
Frequency ( See
available frequency
Commodity Code range on data sheet.
)
854160 00 00
Load Capacitance
( pF or Series
Resonance)
M
Tolerance (±pm)
@ 25ºC
H
Package
L = Loose
D = 3K Reel
RoHS
Comp'
- PF
7
12.5
Example
00003 = 32.768kHz
( Only 32.768kHz )
Code
±ppm
G
N
20
50
P
100
NB:
Operating
Temperature
Range (ºC)
It is important to suffix
the above part number
with the full frequency
required to give a
completed part number
as illustrated below
I
-40+85
Full Example Part Number
SE0003GIHD-PF
32.768kHz
NOTES :
1) Other Tolerances, CL's and other Operating Temperature Ranges may be available.
As each of these specification parameters impact on each other, it is not always possible to combine all options in one device. Therefore, if a
specification not catered for above is required, please contact us directly for the relevant part number code(s).
2) ACT are always happy to consider truly custom specification parts which may require non-standard specification parameters,
specific testing, customer requested AQL requirements, non standard packaging or taping and reeling and custom marking. ( MOQ
DEPENDENT ) Such devices would normally be allocated a custom specification ( An ACT711S device may have a part number
such as SE00003C- C1101-PF)
3) Stability Over Operating Temperature (ºC) please refer to the data.
ISO9001 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, United Kingdom
http:www.actcrystals.com
Issue: 11 I3
Date: 13-02-2013