RoHS AR11-3671 Single Port RJ45 Connector 10/100 Base-T Ethernet Application Impedance: 100OHMS RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Operating Temp: 0ºC to +70ºC Available in other Circuit Designs Optional Gold Plating Thickness Other LED Patterns available Electrical Specifications @ 25°C Part Number AR11-3671 OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 1-100MHz -1.0 Turns Ratio chip: cable (±2%) 1CT:1CT 1-30MHz -18 Return Loss (dB Min) 30-60MHz -18-20Log(F/30MHz) 60-80MHz -12 Electrical Specifications @ 25°C CMR CDMR Cross Talk HI-POT (dB Min) (dB Min) (dB Min) (Vrms) 0.5-1MHz 10MHz 30MHz 50MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 0.5mA/3Sec. -40 -35 -37 -50 -50 -40 -50 -50 -30 1500 -47 -30 -42 -45 -50 -50 All specifications subject to change without notice. MECHANICAL 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 10/18/12 15 www.alliedcomponents.com RoHS RoHS Single Port RJ45 Connector AR11-3671 SCHEMATICS LED Schematic Code: G (see chart below) LED Code A B C D E F G H Left LED +9, -10 -9, +10 Green Yellow Green Green Yellow Yellow Orange Green Green - Right LED +11, -12 -11, +12 Yellow Green Green Yellow Green Orange Green Yellow Yellow PCB LAYOUT NOTES 1. Shield- 0.20mm THICKNESS BRASS C2680 H. PLATING NICKEL 30u"-50u" 2. HousingStandard Material FR52, Glass filled Polyester UL94V-0 Standard Color Black. 3. RJ Terminal- Plastic: FR52, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u"-60u" for all and Sn 100%, and 30u” Gold Plating. 4. Input Terminal: FR52.,Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5191. Plating: Nickel 40u"-60u" for all and Sn 100%. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 10/18/12 15 www.alliedcomponents.com