AMPHENOL IDS-54

IDS-54
Amphenol
®
RIG-Lok
Amphenol , which has been manufacturing connectors for
more than 75 years, offers an extensive array of connector
lines including rectangular, circular, fiber optic, EMI/EMP filter
and a variety of special application connectors.
With the introduction of its patented RADSOK technology,
Amphenol Industrial Operations (AIO) revolutionized the
connector Industry. RADSOK’S twisted grid configuration
allows for 50% more current to pass through the same size
pin, while providing increased reliability, ampacity and
cycle durability as well as lower insertion force, T-rise and
voltage drop.
Features
• Ruggedized over-molded coupling nut
• Wire gages 4/0 awg through 777 MCM
• Utilizes patented Radsok Technology
• 1/4 Turn Reverse Bayonet
• Crimp or Busbar Termination
• Silver Plated Contacts
• Finger Proof
• Current: 800Amp
• Voltage: DC 2500V
• Operating Temperature: -40ºC to +125ºC
• 2000 Mating Cycles
• 300 Day Salt Spray Rating
www.amphenol-industrial.com
Benefits:
• Quick positive coupling
• Vibration resistant
• Audible, tactile and visual indication of full coupling
• Environmental Applications
• High Amperage Applications
• Easily Adaptable
• Better Conductivity where needed
• Allows conductor size change
• Hardware options include plugs, inline receptacle,
and panel mount receptacles
The RIG-Lok is a reverse bayonet connector which
incorporates our patented RADSOK technology. It is
designed to deliver high power from source to load.
The plug contains an 18mm RADSOK socket and the
receptacle contains an 18mm pin with the option of
crimp, 2 hole busbar, or threaded busbar termination.
When unmated, personal safety is maintained through
touchproof, dead-front contact design. The RADSOK’S
strongest benefit is its very low milli-volt drop and
minimized temperature rise when transmitting high
current. The 18mm RIG-Lok is perfectly suited for high
amperage applications such as electrical generators,
fuel cells, load banks, and charging systems.
Example Plug Part Number: V-06G-E-M50-7-N-BL
Example Receptacle Part Number: V-03B-E-N-BL
V = Vortex GT Connector
8.250 (mated)
1=
06G
03C
03B
01C
Plug with Crimp Socket Contact
Receptacle with Crimp Pin Contact
Receptacle with 2 Hole Busbar Pin Contact
Inline Receptacle with Crimp Pin Contact
2=
Omit
E
No Protective Cap
Protective Cap
3=
Omit
M40
M50
M63
Plug or Receptacle Without Rear Hardware
Metric M40 Cable Adapter With Gland .748-1.102"
Metric M50 Cable Adapter With Gland 1.063-1.378"
Metric M50 Cable Adapter With Gland 1.339-1.772"
4=
Omit
ø2.102
1
2
3
4
5
6
7
8
Threaded or 2 Hole Busbar Receptacles
120 mm sq and 4/0awg crimp wire well
150 mm sq and 262MCM crimp wire well
185 mm sq and 313MCM crimp wire well
200 mm sq and 373MCM crimp wire well
240 mm sq and 444MCM crimp wire well
535 MCM crimp wire well
646 MCM crimp wire well
777 MCM crimp wire well
5=
N
J
W
X
Y
180° Normal Rotation, Keyed Receptacle Shell and Slotted Plug
360° Rotation, No Keyways
120° Alternate Rotation, Keyed Receptacle Shell and Slotted Plug
90° Alternate Rotation, Keyed Receptacle Shell and Slotted Plug
210° Alternate Rotation, Keyed Receptacle Shell and Slotted Plug
6=
Omit
BL
OR
Y
BR
R
W
BK
G
No Color Coded Powdercoating
Blue Powdercoat for DC Voltage
Orange Powdercoat for DC Voltage
Yellow Powdercoat for DC Voltage
Brown Powdercoat for DC Voltage
Red Powdercoat for AC Voltage
White Powdercoat for AC Voltage
Black Powdercoat for AC Voltage
Green Powdercoat for AC Voltage
7=
****
Modification - Please Consult the factory for additional options.
ø2.579
5.125 (mated)
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented
without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not
recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
For further information on your individual application requirements, contact: Amphenol Corporation
North America:
Amphenol Industrial Operations
180 N. Freeport Drive, Plant 4
Nogales, AZ 85621
Tel: (520) 285-5130
Fax: (520) 285-5134
Europe:
Amphenol Industrial Operations Europe
Via Barbaiana 5
1-20020 Lainate (MI) Italy
Tel: +39 02 93254.204
Fax: +39 02 93254.444
Middle East:
Amphenol Middle East Enterprises FZE
Office C-37 PO Box 21107
Ajman Free Zone, UAE
Tel: +9716-7422494
Fax: +9716-7422941
Email: [email protected]
Email: [email protected]
Email: [email protected]
Asia:
Amphenol Technology Shenzhen Ltd
Block 5 Fuan 2nd Industrial Park
Dayang Rd, Fuyong Baoan
Baoan, Shenzhen, China 518103
Tel; +86 755 2881 8389
Fax; +86 755 2991 8310
Email: [email protected]