PRELIMINARY EZ4x Module Series A1101R08A-EZ4x The A1101R08A-EZ4x is a high-performance demonstration platform, designed to showcase Anaren's family of ETSI compliant Radio Modules. It features an A1101R08A AIR 868 MHz Radio Module with integral antenna, and is designed to quickly connect to the Texas Instruments eZ430 Development Kit battery board or USB debugging interface Product Overview The A1101R08A-EZ4x is a target board assembly showcasing the Anaren A1101R08A radio module in the industry’s smallest package (9 x 16 x 2.5mm) mounted on it. wide range of applications, including: industrial control, building automation, low-power wireless sensor networks, lighting control, and automated meter reading. This module is fully compliant with Texas Instruments eZ430-RF2500 Development Kit, and plugs directly into either the battery board or USB debugging interface via the 6 pin header. It is designed to be a direct-replacement for the access point and end point target board modules included with the Texas Instrument eZ430-RF2500 Development Kit. Each Anaren A1101R08A Radio Module is ETSI compliant, and incorporates the Texas Instruments CC1101 transceiver chip. As a stand-alone module for your final design implementation Anaren’s A1101R08A has an LGA pad footprint with an integral printed antenna, this module is designed to effortlessly integrate into a Layout Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] PRELIMINARY Nomenclature Pin Diagram EZ4x Connections A 1 2 3 4 5 Battery / USB: ST1 ST2 ST3 ST4 ST5 ST6 P3.4 / UCA0TXD / UCA0SIMO GND RST / SBWTDIO TEST / SBWTCK VCC (3.6V) P3.5 / UCA0RXD / UCA0SOMI Chip series Function Frequency band Form factor Module Type 6 Firmware (EZ4 only) (Anaren) (1101, 2500) (R = radio only) (x100MHz) (A = Internal Antenna, C = Connector) (EM1 = Eval Module, EZ4 = EZ-430 Module) (A = Access Point, E = End Point, X = Custom (or no firmware) To view the entire available family of AIR Modules & Development options, please visit our website at: http://www.anaren.com/content/File/AIR/AIRoverview.cfm Interface: P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 GND VCC P2.0 / ACLK / A0 / OA0I0 P2.1 / TAINCLK / SMCLK / A1 /A0O P2.2 / TA0 / A2 / OA0I1 P2.3 / TA1 / A3 / VREF– / VeREF–/ OA1I1 / OA1O P2.4 / TA2 / A4 / VREF+ / VeREF+/ OA1I0 P4.3 / TB0 / A12 / OA0O P4.4 / TB1 / A13 / OA1O P4.5 / TB2 / A14 / OA0I3 P4.6 / TBOUTH / A15 / OA1I3 GND P2.6 / XIN (GDO0) P2.7 / XOUT (GDO2) P3.2 / UCB0SOMI / UCB0SCL P3.3 / UCB0CLK / UCA0STE P3.0 / UCB0STE / UCA0CLK / A5 P3.1 / UCB0SIMO / UCB0SDA PLEASE NOTE: Additional information on the Texas Instruments CC1101 Development Kit can be found in the company’s latest datasheet release at http://www.ti.com This product shall not be used in any of the following products or systems without prior express written permission from Anaren Microwave, Inc: (i) implantable cardiac rhythm management systems, including without limitation pacemakers, defibrillators and cardiac resynchronization devices; (ii) external cardiac rhythm management systems that communicate directly with one or more implantable medical devices; or (iii) other devices used to monitor or treat cardiac function, including without limitation pressure sensors, biochemical sensors and neurostimulators. Caution! ESD sensitive device. Precautions should be used when handling the device in order to prevent permanent damage. Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057 800.411.6596 / http://www.anaren.com / [email protected] 1040a