ANAREN A2500R24C-EZ4X

EZ4x Module Series
A2500R24C-EZ4x
The A2500R24C-EZ4x is a high-performance demonstration platform, designed to
showcase Anaren's family of FCC & IC certified and ETSI-compliant Radio
Modules. It features an A2500R24C AIR 2.4 GHz connectorized module, and is
designed to quickly connect to the Texas Instruments eZ430 Development Kit
battery board or USB debugging interface
Product Overview
The A2500R24C-EZ4x is a target board assembly
with the Anaren A2500R24C radio module in the
industry’s smallest package (9 x 12 x 2.5mm)
mounted on it.
This module is fully compliant with Texas
Instruments eZ430-RF2500 Development Kit, and
plugs directly into either the battery board or USB
debugging interface via the 6 pin header. It is
designed to be a direct-replacement for the
access point and end point target board modules
included with the Texas Instrument eZ430RF2500 Development Kit. Each Anaren
A2500R24C Radio Module is FCC & IC certified,
ETSI-compliant, and incorporates the Texas
Instruments CC2500 transceiver chip.
button connector receptacle. This module is
designed to effortlessly integrate into a wide range
of applications, including: industrial control, building
automation, low-power wireless sensor networks,
lighting control, and automated meter reading.
As a stand-alone module for your final design
implementation, Anaren’s A2500R24C has an
LGA pad footprint with an industry-standard U.FL
Layout
Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / [email protected]
Pin Diagram
Nomenclature
EZ4x Connections
A
1 Chip series
2 Function
3 Frequency band
4 Form factor
5 Module Type
Battery / USB:
ST1
ST2
ST3
ST4
ST5
ST6
P3.4 / UCA0TXD / UCA0SIMO
GND
RST / SBWTDIO
TEST / SBWTCK
VCC (3.6V)
P3.5 / UCA0RXD / UCA0SOMI
6 Firmware (EZ4 only)
(Anaren)
(CC1101, CC110L, CC2500)
(R = radio only)
(x100MHz)
(A = Internal Antenna, C = Connector)
(EM1 = Eval Module, EZ4x = EZ-430
Module)
(A = Access Point, E = End Point,
X = Custom (or no firmware)
To view the entire available family of AIR Modules &
Development options, please visit our website at:
http://www.anaren.com/air
Interface:
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
GND
VCC
P2.0 / ACLK / A0 / OA0I0
P2.1 / TAINCLK / SMCLK / A1 /A0O
P2.2 / TA0 / A2 / OA0I1
P2.3 / TA1 / A3 / VREF– / VeREF–/ OA1I1 / OA1O
P2.4 / TA2 / A4 / VREF+ / VeREF+/ OA1I0
P4.3 / TB0 / A12 / OA0O
P4.4 / TB1 / A13 / OA1O
P4.5 / TB2 / A14 / OA0I3
P4.6 / TBOUTH / A15 / OA1I3
GND
P2.6 / XIN (GDO0)
P2.7 / XOUT (GDO2)
P3.2 / UCB0SOMI / UCB0SCL
P3.3 / UCB0CLK / UCA0STE
P3.0 / UCB0STE / UCA0CLK / A5
P3.1 / UCB0SIMO / UCB0SDA
PLEASE NOTE: Additional information on the Texas Instruments
CC2500 Development Kit can be found in the company’s latest datasheet
release at http://www.ti.com
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
Caution! ESD sensitive device. Precautions
should be used when handling the device in
order to prevent permanent damage.
Anaren, Inc. / 6635 Kirkville Road / East Syracuse, NY 13057
800.411.6596 / http://www.anaren.com / [email protected]
1236a