BIF3 5-800 MHz Internally Matched IF Amplifier Device Features OIP3 = 44.0 dBm @ 70 MHz Gain = 20.3 dB @ 70 MHz Output P1 dB = 23.5 dBm @ 70 MHz 50 Ω Cascadable Patented over voltage protection Lead-free/RoHS-compliant SOT-89 SMT package Typical Performance1 Product Description BeRex’s BIF3 is a high performance InGaP/ GaAs HBT MMIC amplifier, internally matched to 50 Ohms and uses a patented over voltage protection circuit to protect a internal device. The BIF3 is designed for high linearity IF amplifier that requires excellent gain, high OIP3 and flatness. It is packaged in a RoHS-compliant with SOT-89 surface mount package. Parameter Frequency Unit 70 140 250 500 800 MHz Gain 20.3 20.2 19.9 19.0 17.9 dB S11 -19.0 -18.0 -15.0 -11.0 -8.0 dB -16.0 -17.0 -16.0 -13.0 -11.0 dB OIP3 44.0 41.5 40.5 40.5 39.5 dBm P1dB Noise Figure 23.5 5.1 24.5 5.2 24.5 5.2 24.2 5.3 24.0 5.3 dBm dB S22 2 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 8 dBm per tone separated by 1 MHz. Applications Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Applications Circuit Bandwidth IC @ (Vc = 5V) VC dG/dT RTH Min. 5 75 Typical 85 5.0 -0.004 45 Max. 800 97 Unit MHz mA V dB/°C °C/W Absolute Maximum Ratings *C1, C2=8200pF ± 5%; C3 = 100 pF ± 5%; C4 = 1000pF ±5% *C5 = 10uF; L1 = 680nH ±5% Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 +7.0 140 23 Unit °C °C °C V mA dBm Operation of this device above any of these parameters may result in permanent damage. Above 7V, a device goes to protection mode. BeRex ● website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=80mA, T=25°C) BeRex ● website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier S-Parameter (Vdevice = 5.0V, Icc = 85mA, T = 25 °C, calibrated to device leads) Freq [MHz] 100 500 1000 1500 2000 2500 3000 3500 4000 S11 [Mag] S11 [Ang] 0.624 0.678 0.748 0.788 0.790 0.861 0.873 0.955 1.037 S21 [Mag] 178.2 164.5 144.2 121.2 102.1 76.9 54.1 26.4 -3.3 S21 [Ang] 10.523 7.809 5.812 4.823 4.095 3.935 4.121 3.614 3.252 S12 [Mag] 169.9 137.3 155.4 100.6 82.6 74.1 51.6 30.1 11.4 S12 [Ang] 0.059 0.069 0.067 0.078 0.070 0.076 0.072 0.061 0.060 S22 [Mag] 1.5 0.3 -0.4 -7.1 -23.9 -17.5 -41.4 -39.1 -53.2 0.096 0.162 0.223 0.272 0.271 0.305 0.327 0.347 0.362 S22 [Ang] -26.0 -107.1 -156.6 167.3 140.3 116.8 94.2 75.9 55.0 Typical Performance (Vd = 5V, Ic = 85mA, T = 25°C) Freq MHz 70 140 250 500 800 S21 S11 S22 P1 OIP3 NF dB dB dB dBm dBm dB 20.3 -19 -16 23.5 44 5.1 20.2 -18 -17 24.5 41.5 5.2 19.9 -15 -16 24.5 40.5 5.2 19.0 -11 -13 24.2 40.5 5.3 17.9 -8 -11 24.0 39.5 5.3 Typical Performance (Vd = 4.7V, Ic = 64mA, T = 25°C) Freq MHz 70 140 250 500 800 S21 S11 S22 P1 OIP3 NF dB dB dB dBm dBm dB 20.1 -27.2 -13.1 22.9 35.0 5.1 19.9 -24.6 -12.6 23.5 38.5 5.2 19.7 -16.8 -13 23.3 39.5 5.2 18.9 -11.3 -12.5 23.3 36.5 5.3 17.6 -9.3 -9.7 22.7 35.3 5.3 Typical Performance (Vd = 4.5V, Ic = 54mA, T = 25°C) BeRex Freq MHz 70 140 250 500 800 S21 S11 S22 P1 OIP3 NF dB dB dB dBm dBm dB 20.2 -18.8 -14.1 22.1 34.5 5.1 20.2 -19 -16 23.0 37.5 5.2 19.8 -16.1 -15.1 23.1 34.5 5.2 18.7 -11.8 -11.8 22.6 35.5 5.3 17.5 -9.2 -9.6 22.2 34.5 5.3 ● website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Typical Performance (Vd = 4V, Ic = 28mA, T = 25°C) BeRex Freq MHz 70 140 250 500 800 S21 dB 19.5 19.4 19.1 18.1 16.8 S11 dB -18.4 -18.5 -15.8 -11.5 -8.9 S22 dB -12.3 -13.8 -13.5 -11.3 -9.4 P1 dBm 20.7 21.2 21.2 20.7 13.5 OIP3 dBm 35 29 27.5 25.5 31 NF dB 5.1 5.2 5.2 5.3 5.3 ● website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Device Performance OIP3 BeRex ● website: www.berex.com ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier ACPR BeRex ● website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier ACLR S-Parameters(S11/S22) Gain Flatness BeRex ● website: www.berex.com ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension _ millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BIF3 5-800 MHz Internally Matched IF Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1C Value: Passes <2000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ● website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C