BIF3

BIF3
5-800 MHz Internally Matched IF Amplifier
Device Features






OIP3 = 44.0 dBm @ 70 MHz
Gain = 20.3 dB @ 70 MHz
Output P1 dB = 23.5 dBm @ 70 MHz
50 Ω Cascadable
Patented over voltage protection
Lead-free/RoHS-compliant SOT-89 SMT package
Typical Performance1
Product Description
BeRex’s BIF3 is a high performance InGaP/
GaAs HBT MMIC amplifier, internally
matched to 50 Ohms and uses a patented
over voltage protection circuit to protect a
internal device. The BIF3 is designed for
high linearity IF amplifier that requires excellent gain, high OIP3 and flatness. It is packaged in a RoHS-compliant with SOT-89 surface mount package.
Parameter
Frequency
Unit
70
140
250
500
800
MHz
Gain
20.3
20.2
19.9
19.0
17.9
dB
S11
-19.0
-18.0
-15.0
-11.0
-8.0
dB
-16.0
-17.0
-16.0
-13.0
-11.0
dB
OIP3
44.0
41.5
40.5
40.5
39.5
dBm
P1dB
Noise Figure
23.5
5.1
24.5
5.2
24.5
5.2
24.2
5.3
24.0
5.3
dBm
dB
S22
2
1
Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system.
2
OIP3 _ measured with two tones at an output of 8 dBm per tone separated by 1 MHz.
Applications
 Base station Infrastructure/RFID
 Commercial/Industrial/Military wireless system
Applications Circuit
Bandwidth
IC @ (Vc = 5V)
VC
dG/dT
RTH
Min.
5
75
Typical
85
5.0
-0.004
45
Max.
800
97
Unit
MHz
mA
V
dB/°C
°C/W
Absolute Maximum Ratings
*C1, C2=8200pF ± 5%; C3 = 100 pF ± 5%; C4 = 1000pF ±5%
*C5 = 10uF; L1 = 680nH ±5%
Parameter
Operating Case Temperature
Storage Temperature
Junction Temperature
Operating Voltage
Supply Current
Input RF Power
Rating
-40 to +85
-55 to +155
+220
+7.0
140
23
Unit
°C
°C
°C
V
mA
dBm
Operation of this device above any of these parameters may result in permanent damage.
Above 7V, a device goes to protection mode.
BeRex
●website: www.berex.com
●email: [email protected]
1
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
V-I Characteristics
BeRex SOT89 Evaluation Board
BeRex
Evaluation Board
*Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB
Typical Device Data
S-parameters (Vc=5V, Ic=80mA, T=25°C)
BeRex
●website: www.berex.com
●email: [email protected]
2
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
S-Parameter
(Vdevice = 5.0V, Icc = 85mA, T = 25 °C, calibrated to device leads)
Freq
[MHz]
100
500
1000
1500
2000
2500
3000
3500
4000
S11
[Mag]
S11
[Ang]
0.624
0.678
0.748
0.788
0.790
0.861
0.873
0.955
1.037
S21
[Mag]
178.2
164.5
144.2
121.2
102.1
76.9
54.1
26.4
-3.3
S21
[Ang]
10.523
7.809
5.812
4.823
4.095
3.935
4.121
3.614
3.252
S12
[Mag]
169.9
137.3
155.4
100.6
82.6
74.1
51.6
30.1
11.4
S12
[Ang]
0.059
0.069
0.067
0.078
0.070
0.076
0.072
0.061
0.060
S22
[Mag]
1.5
0.3
-0.4
-7.1
-23.9
-17.5
-41.4
-39.1
-53.2
0.096
0.162
0.223
0.272
0.271
0.305
0.327
0.347
0.362
S22
[Ang]
-26.0
-107.1
-156.6
167.3
140.3
116.8
94.2
75.9
55.0
Typical Performance (Vd = 5V, Ic = 85mA, T = 25°C)
Freq
MHz
70
140
250
500
800
S21
S11
S22
P1
OIP3
NF
dB
dB
dB
dBm
dBm
dB
20.3
-19
-16
23.5
44
5.1
20.2
-18
-17
24.5
41.5
5.2
19.9
-15
-16
24.5
40.5
5.2
19.0
-11
-13
24.2
40.5
5.3
17.9
-8
-11
24.0
39.5
5.3
Typical Performance (Vd = 4.7V, Ic = 64mA, T = 25°C)
Freq
MHz
70
140
250
500
800
S21
S11
S22
P1
OIP3
NF
dB
dB
dB
dBm
dBm
dB
20.1
-27.2
-13.1
22.9
35.0
5.1
19.9
-24.6
-12.6
23.5
38.5
5.2
19.7
-16.8
-13
23.3
39.5
5.2
18.9
-11.3
-12.5
23.3
36.5
5.3
17.6
-9.3
-9.7
22.7
35.3
5.3
Typical Performance (Vd = 4.5V, Ic = 54mA, T = 25°C)
BeRex
Freq
MHz
70
140
250
500
800
S21
S11
S22
P1
OIP3
NF
dB
dB
dB
dBm
dBm
dB
20.2
-18.8
-14.1
22.1
34.5
5.1
20.2
-19
-16
23.0
37.5
5.2
19.8
-16.1
-15.1
23.1
34.5
5.2
18.7
-11.8
-11.8
22.6
35.5
5.3
17.5
-9.2
-9.6
22.2
34.5
5.3
●website: www.berex.com
●email: [email protected]
3
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
Typical Performance (Vd = 4V, Ic = 28mA, T = 25°C)
BeRex
Freq
MHz
70
140
250
500
800
S21
dB
19.5
19.4
19.1
18.1
16.8
S11
dB
-18.4
-18.5
-15.8
-11.5
-8.9
S22
dB
-12.3
-13.8
-13.5
-11.3
-9.4
P1
dBm
20.7
21.2
21.2
20.7
13.5
OIP3
dBm
35
29
27.5
25.5
31
NF
dB
5.1
5.2
5.2
5.3
5.3
●website: www.berex.com
●email: [email protected]
4
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
Device Performance
OIP3
BeRex
●website: www.berex.com
●email: [email protected]
5
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
ACPR
BeRex
●website: www.berex.com
●email: [email protected]
6
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
ACLR
S-Parameters(S11/S22)
Gain Flatness
BeRex
●website: www.berex.com
●email: [email protected]
7
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
Package Outline Dimension
Suggested PCB Land Pattern and PAD Layout
PCB Land Pattern
0.40
1.30
PCB Mounting
0.40
Ø0.40
0.40
0.75
1.20
2.15
1.20
0.50
0.45
1.20
1.20
2.80
1.50
1.00
0.65
0.35
Note : All dimension _ millimeters
PCB lay out _ on BeRex website
BeRex
●website: www.berex.com
●email: [email protected]
8
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D
BIF3
5-800 MHz Internally Matched IF Amplifier
Package Marking
Tape & Reel
SOT89
Packaging information:
Tape Width (mm): 12
Reel Size (inches): 7
Device Cavity Pitch (mm): 8
YY = Year, WW = Working Week,
XX = Wafer No.
Devices Per Reel: 1000
Lead plating finish
100% Tin Matte finish
(All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate
thin whisker growth concerns.)
MSL / ESD Rating
ESD Rating:
Class 1C
Value:
Passes <2000V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114B
MSL Rating:
Level 1 at +265°C convection reflow
Standard:
JEDEC Standard J-STD-020
NATO CAGE code:
2
BeRex
N
9
6
F
●website: www.berex.com
●email: [email protected]
9
Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex.
All other trademarks are the property of their respective owners. © 2010 BeRex
Rev. D