6 5 4 3 2 1 D D USB Insulator (Portion 2) USB Type A Plug Housing Plastic Version USB Insulator (Portion 1) 17.90 REF. USB Type A Plug Housing Plastic Version USB Metal Shell (Portion 2) Coupling Ring Plastic version Bayonet Locking Type USB Metal Shell (Portion 1) Key Protrusion x 3 C C 21.00 18.9 REF. HEX FLATS n31.50 Interfacial Seal Notes: B 1. Electrical Specifications: - Meets USB 2.0 Specification - Contact Resistance: 30 mOhm max. - Insulation Resistance: 1000 MOhm min. @ 100 VDC 61.80 REF. B - Current Rating: 1.5 A max. at 25~C - Working Voltage: 30 V (RMS) max. - DWV: 500 VAC/60s at sea Level 6 5 4 DOT NOT ALTER CAD DRAWING BY HAND Directive 2002/95/EC "RoHS" Compliant THIS DRAWING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC CORPORATION A - Operating Temperature: -40~C to +85~C 2. Material and Finish: - Coupling Ring and Plug Housing: Polyester (Black), UL94 V-0 - Interfacial Seal: Silicone, Color: White - Cable Fitting: PA (Black), UL94 V-0 - Cable Fitting Rubber Ring: NBR, Color: Black - USB Metal Shell: SPCC, Nickel Plated - USB Insulator: PBT, UL94 V-0, White - USB Contacts: Copper Alloy, - USB Contact Finish: 30 u" Gold min. over Nickel for mating area, Tin over Nickel for solder cup 3. USB Type A Plug accepts AWG28 to AWG24 wires, Cable with outer Diameter of 4.06 mm to 5.21 mm 4. Cable Fitting accepts Cable Outer Diameter Range of 4 mm to 8 mm 5. RoHS compliant Customer: Name Tolerance Title Approval Date 0 PLC 1 PLC 2 PLC 3 PLC ANGLES `0.50 `0.38 `0.25 `0.10 Autodesk Inventor `3~ Material: See Notes Title: Date Name Draw. Sept. 09 Vincent Ke Appd. S ept. 09 J. Chaudry 2008 D-old R original Rev. 3 Changes Date IP67 USB A USB 2.0 Type A Plug Assembly Kit Solder Cup Version Norm a Dim. in mm Scale: 1.5:1 Unless otherwise specified DIN Drawing No.: 39K1A364 A3 Sheet Part No.: 17-200121 Name 2 1/1 1