DIOTEC ELECTRONICS CORP Data Sheet No. BUDI-6000D-1A 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 60 AMP JUMBO DIODE CELL MECHANICAL SPECIFICATION FEATURES Void Free Vacuum Die Soldering For Maximum Mechanical Strength and Heat Dissipation (Solder Voids: Typical < 2%, Max. < 10% of Die Area) Die Size: 0.216" Flat to Flat Hex D Smallest Diameter A Slug Is Anode Biggest Effective Die Area for the 60 Amp Class of Jumbo Diode Cells Proprietary Passivation G B F O High Temperature Solder (Solidus 287 C, Liquidus 296OC) to Allow Higher Operating And Assembly Temperatures Silver Plated Largest Diameter Copper Slugs Slug Is Cathode Silicon Die Copper Headers Are Silver Plated For Easy Soldering And Superior Solder Joints MILLIMETERS DIM MIN MAX MIN MAX 7.25 7.35 0.285 0.290 B 2.05 2.15 0.080 0.085 D 6.50 6.60 0.256 0.260 A Largest Diameter Header Is Cathode RoHS COMPLIANT INCHES F 0.72 0.82 0.028 0.032 G 0.96 1.07 0.038 0.042 MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. PARAMETER (TEST CONDITIONS) RATINGS SYMBOL BAR Series Number BAR BAR BAR BAR UNITS BAR BAR 6001D 6002D 6004D 6006D 6008D 6010D 6012D RRM Maximum DC Blocking Voltage V RMS Maximum RMS Voltage V Maximum Peak Recurrent Reverse Voltage V C RRM IO o Average Forward Rectified Current @ T =125 C Peak Forward Surge Current (8.3mS single half sine wave superimposed on rated load) Maximum Instantaneous Forward Voltage Drop at 60 Amp DC Maximum Average DC Reverse Current At Rated DC Blocking Voltage A = 25 oC o @ TA = 125 C @ T FSM I FM V RM I 800 1000 1200 100 200 400 600 70 140 280 420 560 700 840 100 200 400 600 800 1000 1200 VOLTS 60 AMPS 700 1.1 (1.05 Typical) 2 1.15 VOLTS 50 mA Maximum Thermal Resistance, Junction to Case (Note 1) Rq JC 0.8 °C/W Junction Operating and Storage Temperature Range J STG -65 to +175 °C Notes: 1) Single Side Cooled T ,T BAR60d K21