Specifications: STATSHIELD® METAL-IN SERIES Electrical Properties Surface Resistance: Outer Surface Inner Surface Static Shielding Charge Generation Capacitance Probe (to dissipate 1 KV) Date & Lot Code Printed for QC Traceablility Side Weld Seals 3/8 in. (±0.10) Typical Values Test Procedures/Method <10E11 ohms <10E11 ohms <25 nJ Teflon: 0.09 nC/sq. in. Quartz: 0.01 nC/sq. in. <30 volts ANSI/ESD STM11.11 ANSI/ESD STM11.11 ANSI/ESD STM11.31 Modified Incline Plane Modified Incline Plane ANSI/EIA-541/Appendix E, 1kV Discharge Physical Properties Bag Thickness: Thickness Width (Inside Dimensions) Length (Inside Dimensions) Light Transmission Heat Seal Tensile Puncture Resistance MVTR OTR Outgassing Non-corrosive Nominal .0030" (.0762mm) ±10% Nominal -0" / + .125" Nominal ± .125" >40% (Tobias) >10 lbs/in 9000 PSI >10 lbs <0.40 <6.1 Pass Pass MIL-STD-3010, 1003 Chemical Properties Corrosion: No effect on aluminum, copper, silver, Sn-Pb coated foil, stainless steel, low carbon steel Polycarbonate compatible: Contains no Amines, Amides, or N-Octanoic Acid. ASTM D-1003 375°F, 1/2 sec 60 psi ASTM D882 MIL-STD-3010, 2065 FTMS 101C/2065 ASTM D-1434 ASTM E595 MIL-STD-3010, M3005 Bag is free of amines, N-octanoic acid, silicones and heavy metals. Low Charging Static Dissipative Proprietary Outer Polyester Layer Aluminum Shielding Layer Low Charging Static Dissipative Proprietary Inner Polyethylene Layer ANSI/ESD S541 Section 6.2 Outside an EPA “Transportation of sensitive products outside of an EPA shall require packaging that provides: 1. Low charge generation 2. Dissipative or conductive materials for intimate contact 3. A structure that provides electrostatic discharge shielding.” RoHS and REACH Compliance Statement None of the RoHS restricted materials or REACH substances of very high concern are intentionally added in manufacturing this product. Ref: Directive 2002/95/EC Article 4.1. and Regulation (EC) No. 1907/2006. See Desco Industries Inc. Limited Warranty at Desco.com. Mixed Unsortable Plastic Scrap 7 Mixed unsortable plastic scrap shall contain assorted plastics of multiple grades that are co-extruded, bonded or laminated together which are unsortable into individual grades The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20. Statshield® and Statfree® are Registered Trademarks of Desco Industries Inc. Specifications and procedures subject to change without notice. Statshield® bags are packaged 100 per package in an oversized shielding bag. Shelf life of bags is minimum one year in normal indoor storage conditions. DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 PHONE (781) 821-8370 FAX (781) 575-0172 Employee Owned *Film made in USA or Malaysia STATSHIELD® BAG, SHIELDING, METAL-IN CONSTRUCTION, .0030" (.0762mm) DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 FAX (909) 627-7449 © 2011 DESCO INDUSTRIES INC. *Made in the United States of America Desco’s bags are recyclable DRAWING NUMBER 13405 DATE: October 2011