MK Electric - Print Item Information ITEM NUMBER: 5504S CIRCUIT PROTECTION SENTRY ENCLOSURES IP30 ENCLOSURE CARTON QUANTITY: 1 5504s Metal With mounting rail, earth terminals and moulded front plate Four module These enclosures will accommodate two or four module Sentry RCDs or a combination of Sentry modules, excluding contactors. Dimensions: 5504s: 188 x 121 x 74mm (width x height x depth) Degree of Protection to BS EN 60529: 1992 5504s: IP30 Precautions must be taken to maintain the IP rating. eg. correct use of cable glands and knockouts Click here to view the Honeywell privacy statement Site designed & developed by viplondon http://www.mkelectric.co.uk/products/print.asp?rangeid=1051&itemid=671208/02/2007 13:15:08 220 Sentry CIRCUIT PROTECTION Skeleton Units Enclosures FOR MOUNTING IN A MANTEL/CLIFTON TYPE ENCLOSURE IP65 WEATHERPROOF ENCLOSURE www.mkelectric.co.uk Switch Disconnectors Double Pole MCBs Single Pole TYPE B ONE MODULE TWO MODULE IP30 ENCLOSURE 6000s 5502s K5592s 5702s 5500s 5903s 5906s 5560s 5910s 5916s 6001s 5704s 6000s 1 5702s 1 WEATHERPROOF COMPLETE WITH NEUTRAL AND EARTH TERMINAL BLOCK ACCEPTS UP TO 4 MODULES ACCEPTS 14 ONE MODULE PRODUCTS (1 INTEGRAL NEUTRAL BAR) 6001s 100A SWITCH DISCONNECTOR AND 63A 30mA RCD. ACCEPTS A FURTHER 10 ONE MODULE PRODUCTS IN ANY CONFIGURATION OF RCD PROTECTED AND UNPROTECTED CIRCUITS BETWEEN 2/8 AND 8/2 These units are suitable for use in most Mantel and Clifton type enclosures. Factory assembled units are available for specific installations. DIMENSIONS: WIDTH HEIGHT DEPTH 6000s: 222 x 333 x 90mm 6001s: 222 x 333 x 90mm Degree of Protection to BS EN 60529: 1992 IP30 Precautions must be taken to maintain the IP rating, eg. correct use of cable glands and knockouts. BS EN 60439-3: 1994 5504s 1 WEATHERPROOF COMPLETE WITH NEUTRAL AND EARTH TERMINAL BLOCK ACCEPTS UP TO 8 MODULES Typical applications for enclosures are house extensions, garages and small workshops. These enclosures will accommodate two or four module Sentry RCDs or a combination of Sentry modules, excluding contactors. DIMENSIONS: WIDTH 5702S: 200 x 5704S: 200 x 5502S: 149 x 5504S: 188 x 5604S: 160 x K5592s:185 x HEIGHT 123 x 195 x 76 x 121 x 85 x 119 x Degree of Protection to BS EN 60529: 1992 5702s: IP65 5704s: IP65 5502s: IP30 5504s: IP30 5604s: IP30 K5592s: IP30 5502s 1 DEPTH 112mm 112mm 76mm 74mm 68mm 66mm K5592s 5500s 5 100A 230V INSULATED COMPLETE WITH MOUNTING RAIL, NEUTRAL AND EARTH TERMINALS TWO MODULE 1 5704s 5604s 5560s 5 63A 230V 5906s 10 6A 230V 5910s 1 10 10A 230V 5916s 10 16A 230V 1 METAL WITH MOUNTING RAIL, EARTH TERMINALS AND MOULDED FRONT PLATE FOUR MODULE 1 INSULATED WITH MOUNTING RAIL, TWO INTEGRAL BLANKING PLATES AND TAMPER-PROOFING COMPONENTS FOUR MODULE K5592s suitable for Sentry Single Module RCBO. Precautions must be taken to maintain the IP rating, eg. correct use of cable glands and knockouts IP65 enclosures to EN 60670 5604s 10 3A 230V RCBO ENCLOSURE – METAL TWO AVAILABLE MODULES SUITABLE FOR LIST NOS. 6932s, 6933s, 6934s, 6935s, 6936s, 6937s, 6938s WITH MOUNTING RAIL, EARTH TERMINALS AND METAL FRONT PLATE 5504s 5903s Suitable for installation in Sentry Consumer Units and two or four module enclosures. Accepts direct to busbar or cable-in / cable-out connection. Category of duty: AC22A for switching of resistive and inductive loads. Positive contact status indication in accordance with 16th Edition IEE Wiring Regulations (537-02-03 and 537-03-02) DIMENSIONS: 81 x 36 x 76mm CABLE CAPACITY: 50mm2 BS EN 60947-3: 1992 Suitable for installation in Sentry Consumer Units and two or four module enclosures. Positive contact status indication in accordance with 16th Edition IEE Wiring Regulations (537-02-03 and 537-03-02) DIMENSIONS: 83 x 18 x 74mm CABLE CAPACITY: 3, 6, 10, 16A: 35mm2 Short-circuit breaking capacity: 6KA BS EN 60898: 1991