ETC A01C301111

SPECIFICATION
Part No.
:
A.01.C.301111
Product Name
:
GPS Hercules Heavy Duty Screw Mount Antenna
Description
:
Two Stage 30dB Active GPS Antenna.
Height 29mm Diameter 49mm
Applications
:
Location based services
M2M
Telematics
Remote monitoring
Timing for base stations
Vehicle fleet tracking
SPE-11-8-018/G/SS
Page 1 of 8
1. Introduction
The A.01 Hercules is a high performance thread mount GPS antenna designed for
external use on vehicles and outdoor assets. Designed for heavy duty work with one
piece C&C machined nickel steel base plate and threads, there are also convenient
side slots for running cables laterally. Durable UV resistant ABS housing is resistant
to vandalism and direct attack. At only 29mm high it complies with the latest EU
directives for height restrictions, whilst also enabling covert operation with a
diameter of 49mm.
Cable lengths, types and connectors are fully customizable. For cable lengths above
5M please use our 40dB LNA A.03 model and low loss cable.
2. Electrical Specifications
ELECTRICAL
Frequency
1575.42MHz ± 1.023MHz
Dimensions
Height 29mm, Diameter 49mm,
Impedance
50 ohm
VSWR
2.0 Max
GPS Patch Gain
2.0dB Passive Gain at Zenith
-1.0dBi Gain at 10 degrees elevation
Axial ratio
3.0 dB max
Polarization
RHCP
Out Band Rejection
fo = 1575.42MHz
fo ± 30 MHz 5dB Min.
fo ± 50 MHz 20dB Min.
fo ± 100 MHz 25dB Min.
Input Voltage
Min.1.8V
Typ. 3.0V
Max. 5.5V
Total Gain @ Zenith
25dBic
30dBic
32dBic
Current Consumption
6mA
12mA
30mA
Noise Figure
2.7dB
3.0dB
3.7dB
SPE-11-8-018/G/SS
Page 2 of 8
3. LNA
3.1 LNA Functional Circuit
3.2 LNA Gain and Out-band Rejection @ 3.0V
SPE-11-8-018/G/SS
Page 3 of 8
3.3 Noise Figure
SPE-11-8-018/G/SS
Page 4 of 8
4. Radiation Patterns
0 degree is the top of Hercules.
SPE-11-8-018/G/SS
Page 5 of 8
5. Mechanical Specifications
MECHANICAL
Housing
UV resistant ABS
Thread and Base Plate
One piece C&C’d Nickel Steel
Sealing Foam
CR4305 with 3M9448B double-side adhesive
Waterproof
IP67
Thread Diameter
18mm
Recommended Mounting
Torque
95Nm
Maximum Mounting Torque
135Nm
Operating Temperature
-40ºC ~ +85ºC
Storage Temperature
-40ºC ~ +105ºC
Cable/Connectors
3M RG-174 Cables and SMA Connectors (std)
Fully Customizable
SPE-11-8-018/G/SS
Page 6 of 8
6. Mechanical Drawing
Unit : mm
SPE-11-8-018/G/SS
Page 7 of 8
7. Installation
Recommended torque for mounting is 95Nm or 70ftlbs
Maximum torque for mounting is 135.6Nm or 100ft lbs
SPE-11-8-018/G/SS
Page 8 of 8