SPECIFICATION Part Number: IS.01.B.305111 Product Name: 433 MHz Heavy Duty Screw Mount Antenna Features: Hercules Screw-Mount 0dBi ISM 433 MHz Band 3M CFD-200 SMA (M) 29mm*49mm (Diameter) Waterproof IP67 Rated RoHS Compliant SPE-13-8-004/B/RC Page 1 of 13 1. INTRODUCTION The IS.01 is a high performance 433MHz thread mount antenna for external use on mesh Networks, vehicles and outdoor and indoor assets. It is designed for heavy duty work with extra thick threads. Durable UV resistant ABS housing is resistant to vandalism and direct attack. At only 29mm high it complies with the latest EU directives for vehicle height restrictions, whilst also enabling covert operation with a diameter of 49mm. Range of signal travels up to 300m (see range tests below). 2. SPECIFICATION ELECTRICAL ANTENNA IS.01 STANDARD Peak Gain Average Gain Efficiency VSWR Impedance Polarization ISM 400~460 MHz 1.6 dBi -3.5 dB 45% <1.8:1 50Ω Linear Radiation Properties Omni-directional Max Input Power 5W Operation Frequency (MHz) * The IS.01 antenna performance was measured with 30X30 cm metal plate. Dimensions (mm) Cable Casing Base and Thread Weather proof gasket Connector Tread Diameter Sealant MECHANICAL Height=29mm x Diameter=49mm 3M CFD200- Fully Customizable UV Resistant PVC Nickel plated steel CR4305 foam with 3M9448B double-side adhesive SMA Male Fully Customizable 18 mm Rubber Stopper ENVIRONMENTAL Protection Corrosion Temperature Range Thermal Shock Humidity Shock (Drop Test) Cable Pull IP67 5% NACI for 96hrs- Nickel plated steel base and thread 40ºC to +85ºC 100 cycles -40 C to +885 C Non-condensing 65 C 95% RH 1m drop on concrete 6 axes 8Kgf SPE-13-8-004/B/RC Page 2 of 13 3. TEST SET UP hand) and peak gain, average gain, efficiency and radiation pattern measurements (right hand). SPE-13-8-004/B/RC Page 3 of 13 4. ANTENNA PARAMETERS 4.1. Return Loss Figure 2 Return loss of IS.01 Antenna in Free Space. Figure 3 Return Loss of IS.01 Antenna on 30x30 cm metal plate. SPE-13-8-004/B/RC Page 4 of 13 4.2. VSWR Figure 4 VSWR of IS.01 Antenna in Free Space. Figure 5 VSWR of IS.01 Antenna on 30x30 cm metal plate. SPE-13-8-004/B/RC Page 5 of 13 4.3. Efficiency Figure 6 Efficiency of IS.01 Antenna in Free Space. Figure 7 Efficiency of IS.01 Antenna on 30x30 cm metal plate. SPE-13-8-004/B/RC Page 6 of 13 4.4. Peak Gain Figure 8 Peak Gain of IS.01 Antenna in Free Space. Figure 9 Peak Gain of IS.01 Antenna on 30x30 cm metal plate. SPE-13-8-004/B/RC Page 7 of 13 4.5. Average Gain Figure 10 Average Gain of IS.01 Antenna in Free Space. Figure 11 Average Gain of IS.01 Antenna on 30x30 cm metal plate. SPE-13-8-004/B/RC Page 8 of 13 4.6. Radiation Pattern Figure 12 Radiation Pattern of IS.01 Antenna in Free Space. SPE-13-8-004/B/RC Page 9 of 13 Figure 13 Radiation Pattern of IS.01 Antenna on 30x30cm metal plate. SPE-13-8-004/B/RC Page 10 of 13 5. MECHANICAL DRAWING SPE-13-8-004/B/RC Page 11 of 13 6. INSTALLATION Recommended torque for mounting is 95Nm or 70ftlbs Maximum torque for mounting is 135.6Nm or 100ft lbs SPE-13-8-004/B/RC Page 12 of 13 7. PACKAGING SPE-13-8-004/B/RC Page 13 of 13