ATC 400 Z Series Precision Tolerance NPO RF Microwave Capacitors • EIA Case Size 0201 • Capacitance Range 0.1 pF to 22 pF • Tolerances to ±0.02 pF • Ultra Stable Performance • RoHS Compliant / Lead-Free ELECTRICAL AND MECHANICAL SPECIFICATIONS ATC’s new 400Z Series Precision Tolerance, Thin Film, NPO RF Microwave Capacitor is manufactured with the highest quality materials to provide reliable and repeatable performance. The 400Z is constructed with a low loss silicon dioxide and silicon oxynitride dielectric along with high quality sputtered electrode materials to insure superior performance. High electrical and thermal conductivity and high stability over temperature make this device suitable for a variety of critical small and large signal RF and microwave applications. This Series offers the tightest tolerances available over a wide range of capacitance values. The 400Z is built in an 0201 SMT package and is fully compatible with high speed automated pick-and-place manufacturing. It is designed to meet the most stringent RF and Microwave requirements. Typical applications: Filter Networks, Matching Networks, High Q Frequency Sources, Tuning, Coupling, Bypass and DC Blocking. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): 0 ±30 PPM/°C (-55°C to +125°C) 0.1 to 3.9 pF 0 ±60 PPM/°C (-55°C to +125°C) 4.0 to 22 pF INSULATION RESISTANCE (IR): 1010 Megohms min. @ +25°C at rated WVDC WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2 DIELECTRIC WITHSTANDING VOLTAGE (DWV): 250% of rated WVDC for 5 secs AGING EFFECTS: None DIELECTRIC ABSORPTION: 0.01% SOLDERABILITY, IEC-68-2-58: Components completely immersed in a solder bath at 235°C for 2 secs. ENVIRONMENTAL TESTS LEACH RESISTANCE, IEC-68-2-58: Components completely immersed in a solder bath at 260 ±5°C for 60 secs. LIFE TEST: MIL-STD-202F,Method 108A, for 1000 hours, at 125°C. 200% WVDC applied. ADHESION, MIL-STD-202F, METHOD 211A: a force of 1.1 lbs. applied for 10 secs. ACCELERATED DAMP HEAT STEADY STATE MIL-STD-202, Method 106: 85°C, 85% RH, at rated WVDC, 1000 hours TEMPERATURE CYCLING MIL-STD-202F METHOD 107E: -55°C to +125°C, 15 cycles OPERATING TEMPERATURE RANGE: From -55°C to +125°C (No derating of working voltage) TERMINAL STRENGTH IEC-68-2-21, AMEND. 2: a force of 1.1 lbs. applied for 10 secs. STORAGE: 12 months minimum with components stored in “as received” packaging RESISTANCE TO SOLDER HEAT IEC-68-2-58: 260°C ±5°C for 10 secs. ISO 9001 REGISTERED COMPANY ATC # 001-1124 Rev. B, 9/13 ATC 400 Z Capacitance Values CAP CODE CAP (pF) 0R1 0R2 0R3 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 0.1 0.2 0.3 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 RATED WVDC TOL. CAP CODE CAP (pF) 2R3 2R4 2R5 2R6 2R7 2R8 2R9 3R0 3R1 3R2 3R3 3R4 3R5 3R6 3R7 3R8 3R9 4R0 4R1 4R2 4R3 4R4 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0 4.1 4.2 4.3 4.4 100 P, Q, A, B 50 Q, A, B, C 25 TOL. RATED WVDC CAP CODE CAP (pF) 25 4R5 4R6 4.7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 130 140 150 160 170 180 190 200 210 220 4.5 4.6 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 14 15 16 17 18 19 20 21 22 Q, A, B, C A, B, C TOL. RATED WVDC A, B, C 25 B, C 16 F, G, J 10 VRMS = 0.707 X WVDC ATC PART NUMBER CODE ATC400 Z 1R 0 P T 50 T Series Packaging T - Tape & Reel: 7'' reel, 5000 pc. qty. std.* Case Size Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point *500 pc. prototype reel available. Indicates number of zeros following digits of capacitance in picofarads except for decimal values. T = Tin Plate over Ni (SN100) WVDC Capacitance Tolerance CAPACITANCE TOLERANCE Code P Q A B F C G J Tol. ±0.02 pF ±0.03 pF ±0.05 pF ±0.1 pF ±0.25 pF ±1% ±2% ±5% The above part number refers to a 400 Z Series (0201) 1 pF capacitor, P tolerance (±0.02 pF), 50 WVDC, with T termination (Tin Plated over Nickel Barrier Termination), RoHS Compliant), and tape and reel packaging. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N w w Consult factory for additional performance data. T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759 • [email protected] . c o m Outline Dimensions B 1 Mechanical Dimensions 0.0128 ± 0.002 (0.325 ± 0.050) 0.023 ± 0.002 (0.60 ± 0.05) W T L 0.009 ± 0.002 (0.225 ± 0.050) L: .023 ± .002 (.60 ± .050) Z (0201) W: .0128 ± .002 (.325 ± .050) B2 T: .009 ± 002 (.225 ± .050) B1: .0.004 ±.004 (.10 ±.10) B2: .0.006 ±.002 (.15 ±.05) Inches (mm) Inches (mm) Suggested Mounting Pad Dimensions W L T Horizontal Mount B B Case Size A Min. B Min. C Min. D Min. Z 0201 0.013 (0.33) 0.010 (0.25) 0.010 (0.25) 0.030 (0.76) Inches (mm) A C D Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 2006 American Technical Ceramics Corp. All Rights Reserved A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] w w ATC # 001-1124 Rev. B, 9/13 C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759 • [email protected] . c o m 3 400 Z ESR vs. Frequency 1000 ESR (mOhms) 0.8 pF 1.8 pF 2.2 pF 3.3 pF 4.7 pF 6.8 pF (Typical) 100 1 000 100 1 0000 Frequency (MHz) 400 Z FSR vs. Capacitance Frequency (GHz) 10.00 (Typical) Typical) 1.00 1 10 Capacitance (pF) A M E R I C A N T E C H N I C A L ATC North America +1-631-622-4700 • [email protected] 4 w w C E R A M I C S ATC Europe +46 8 6800410 • [email protected] w . a t c e r a m i c s ATC Asia 86-755-2396-8759 • [email protected] . c o m