ATC 200 A Series BX Ceramic Multilayer Capacitors • Case A Size (.055" x .055") • Capacitance Range 510 pF to 0.01 µF • Low ESR/ESL • Mid-K • Rugged Construction • High Reliability ATC, the industry leader, offers new improved ESR/ESL performance for the 200 A Series Capacitors. This Series exhibits high volumetric efficiency with superior IR characteristics. Ceramic construction provides a rugged, hermetic package. ELECTRICAL AND MECHANICAL SPECIFICATIONS Typical functional applications: Bypass, Coupling and DC Blocking. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): Typical circuit applications: Switching Power Supplies and High Power Broadband Coupling. ±15% maximum (-55°C to +125°C) DISSIPATION FACTOR (DF): 2.5% max. @ 1 KHz INSULATION RESISTANCE (IR): ENVIRONMENTAL TESTS 510 pF to 0.01 MFd: 104 Megohms min. @ +25°C at rated WVDC. 103 Megohms min. @ +125°C at rated WVDC. ATC 200 A Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. WORKING VOLTAGE (WVDC): THERMAL SHOCK: DIELECTRIC WITHSTANDING VOLTAGE (DWV): MIL-STD-202, Method 107, Condition A. Case A: 250% of rated WVDC for 5 secs. (125 VDC) MOISTURE RESISTANCE: AGING EFFECTS: 3% maximum per decade hour. MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85°C with 85% relative humidity for 240 hours min. LIFE TEST: MIL-STD-202, Method 108, for 2000 hours, at 125°C. 200% WVDC applied. See Capacitance Values Table, page 2. PIEZOELECTRIC EFFECTS: Negligible DIELECTRIC ABSORPTION: 2% typical OPERATING TEMPERATURE RANGE: From -55°C to +125°C (No derating of working voltage). TERMINATION STYLES: Available in various surface mount styles. See Mechanical Configurations, page 3. TERMINAL STRENGTH: Terminations for chips and pellets withstand a pull of 5 lbs. min., 10 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. ATC # 001-811 Rev. L, 9/12 ATC 200 A Capacitance Values CAP. CODE CAP. (pF) 511 561 621 681 751 821 911 102 122 152 182 510 560 620 680 750 820 910 1000 1200 1500 1800 TOL. K, M, N RATED WVDC CAP. CODE CAP. (pF) TOL. RATED WVDC 50 202 222 272 332 392 472 502 562 682 822 103 2000 2200 2700 3300 3900 4700 5000 5600 6800 8200 10,000 K, M, N 50 VRMS = 0.707 x WVDC SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY. CAPACITANCE TOLERANCE Code K M N Tol. ±10% ±20% ±30% ATC PART NUMBER CODE ATC200 A 56 2 M W 50 X T Series Packaging Case Size T - Tape and Reel, 1000 pc. qty.* TV - Vertical Orientation of Product, Tape and Reel, 1000 pc. qty.* I - Special Packaging. Consult Factory. *Consult ATC for other quantities Capacitance Code: First 2 significant digits for capacitance. Indicates number of zeros following digits of capacitance in picofarads except for decimal values. ATC Cap-Pac® packaging (100 pc. qty. std.) is also available. For this option, leave last field blank. Capacitance Tolerance Laser Marking WVDC Termination Code The above part number refers to a 200 A Series (case size A) 5600 pF capacitor, M tolerance (±20%), 50 WVDC, with W termination (Tin / Lead, Solder Plated over Nickel Barrier), Laser Marking and ATC Cap-Pac® packaging. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America [email protected] 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www. at c er am ic s .c om ATC 200 A Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE BODY DIMENSIONS INCHES (mm) OUTLINES CASE SIZE & TYPE W/T IS A TERMINATION SURFACE 200A W L 200A P L T 0.010 .055 +.015 -.010 .055 ±.015 .057 (1.45) +.010 - .005 (1.40 ±0.38) max. (0.25 (1.40 +0.25 - 0.13) +0.38 -0.25) T .055 0.010 +.015 -.010 .055 ±.015 .057 (1.45) +.010 - .005 (1.40 (1.40 ±0.38) max. (0.25 +0.38 -0.25) +0.25 - 0.13) Y 200A T A Solderable Nickel Barrier W L Y 200A CA A Gold Chip W L A M E R I C A N ATC North America [email protected] 3 MATERIALS T W Pellet OVERLAP (Y) .055 0.010 +.025 -.010 .055 ±.015 .057 (1.45) +.010 - .005 (1.40 (1.40 ±0.38) max. (0.25 +0.64 -0.25) +0.25 - 0.13) Y A THICKNESS (T) T W Solder Plate WIDTH (W) 0.010 .055 +.015 -.010 .055 ±.015 .057 (1.45) +.010 - .005 Tin / Lead, Solder Plated over Nickel Barrier Termination (1.40 ±0.38) max. (0.25 (1.40 +0.25 - 0.13) +0.38 -0.25) Y A LENGTH (L) LEAD AND TERMINATION DIMENSIONS AND MATERIALS Heavy Tin / Lead Coated, over Nickel Barrier Termination RoHS Compliant Tin Plated over Nickel Barrier Termination RoHS Compliant Gold Plated over Nickel Barrier Termination T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.at c er am ic s .c om ATC 200 A Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE 200A BODY DIMENSIONS INCHES (mm) OUTLINES ATC TERM. CODE CASE SIZE & TYPE W/T IS A TERMINATION SURFACE WN L PN 200A A Non-Mag Pellet T 0.010 .055 +.025 -.010 .055 ±.015 .057 (1.45) +.010 - .005 (0.25 (1.40 (1.40 ±0.38) max. +0.25 - 0.13) +0.64 -0.25) Y A Non-Mag Solderable Barrier TN W L MATERIALS T W L OVERLAP (Y) .055 0.010 Heavy Tin / Lead Coated, over +.035 -.010 .055 ±.015 .057 (1.45) +.010 - .005 Non-Magnetic Barrier (1.40 (1.40 ±0.38) max. (0.25 Termination +0.89 -0.25) +0.25 - 0.13) Y 200A THICKNESS (T) T W Non-Mag Solder Plate WIDTH (W) .055 .010 Tin / Lead, Solder Plated over +.025 -.010 055 ±.015 .057 (1.45) +.010 - .005 Non-Magnetic Barrier (1.40 (1.40 ±0.38) max. (0.25 Termination +0.64 -0.25) +0.25 - 0.13) Y A LENGTH (L) LEAD AND TERMINATION DIMENSIONS AND MATERIALS RoHS Compliant Tin Plated over Non-Magnetic Barrier Termination Suggested Mounting Pad Dimensions W 2m 56 T T L W L 562m Horizontal Electrode Orientation Vertical Electrode Orientation B A B C Vertical Mount Horizontal Mount Pad Size Normal Case A High Density Normal High Density A Min. .070 .050 .080 .060 B Min. .050 .030 .050 .030 C Min. .030 D Min. .130 .030 .090 .030 .090 .030 .130 Dimensions are in inches. D A M E R I C A N ATC North America [email protected] 4 T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www.a t c er am ic s .c om ATC 200 A Performance Data Q VS. CAPACITANCE ATC SERIES 200, CASE A ESR E VS. CAPACITANCE ATC SERIES 200, CASE A 100 1 Q ESR (Ohms) 10 30 MHz 10 30 MHz 0.1 (Typical) 0.01 100 (Typical) 1 1000 10000 100 CAPACITANCE (pF) C SERIES RESONANCE VS. CAPACITANCE ATC SERIES 200, CASE , CASE A A CURRENT RATING VS. CAPACITANCE ATC SERIES 200, CASE A 1000 The current rating is based on a 65°C mounting surface and a device thermal resistance of 40°C/W. A power dissipation of 1.5W will result in a case temperature of 125°C. 100 30 MHz Dotted line = Power dissipation limited (Typical) 10 1 100 1000 10000 100 C CAPACITANCE (pF) A M E R I C A N ATC North America [email protected] 5 10000 10 RMS CURRENT (Amps) FREQUENCY (MHz) 1000 CAPACITANCE (pF) C 1000 CCAPACITANCE (pF) T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] w w w.at c er am ic s .c om 10000 Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 1996 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-811 Rev. L, 9/12