78 and 88V Automotive Meters The right meters for auto-electric diagnosis Perhaps the most important tool you'll use in troubleshooting auto electrical systems is the multimeter. Basic multimeters measure voltage, current and resistance, while automotive multimeters like the Fluke 78 or Fluke 88V have features that can check things such as frequency, duty cycle, make diode tests, and measure temperature, pressure and vacuum. Features Fluke 78 Fluke 88V Continuity for detecting open and shorts 78 ● 88V/A ● Frequency for "pulsed-DC" and AC tests ● ● Duty cycle to verify operation of feedback carburetors ● ● Diode test for alternator testing ● ● Built-in thermometer; thermocouple probe included ● ● Min/Max Recording ● Min/Max/Average recording with Min/Max Alert ● Peak capture to record transients as fast as 250 µs ● Relative mode to remove test lead resistance from low ohms measurements Millisecond pulse width measurements for fuel injectors ● AutoHOLD to capture stable readings ● Large display with bright, two-level backlight ● Magnet hanger to attach meter to the vehicle ● ● ● optional RPM80 Inductive Pickup for both conventional and distributorless (DIS) ignitions Hard Meter Case ● Cat II 300 V Safety rating CAT III 1000V, CAT IV 600 V Specifications On all inputs Fluke 88 Included Accessories Fluke 88V/A: H80M Holster with TPAK Meter Hanging Solution, TL224 SureGrip Silicone Test Lead Set, TP220 SureGrip Test Probe Set, AC285 SureGrip Large Jaw Alligator Clip Set, 80BK Integrated Temperature Probe, RPM80 Inductive Pickup Probe, 2 Automotive Back Probe Pins, Insulation Piercing Clip, C800 Hard Case, User's Manual + Quick Reference Guide Fluke 78: C70Y Holster, TL75 Test Lead Set, AC72 Alligator Clip Set, 80BK Integrated Temperature Probe, User's Manual + Quick Reference Guide Voltage DC Voltage AC Current DC Current AC Resistance Capacitance Frequency Temperature Range 300V 300V 10A 10A 40MΩ Fluke 78 Resolution 0.1mV 1mV 1mA 10mA 0.1Ω Accuracy 0.3% 2.5% 1% 2% 0.5% 100kHz 1000ºC 0.01Hz 1ºC 0.1% 1% Battery Life: 88V – Over 400 hours typical (alkaline) 78 - 2000 hours typical Fluke 88V Range Resolution 1000V 0.01mV 1000V (5 kHz) 0.01mV 10A 0.01µA 10A 0.01µA 40Ω 0.01Ω 10mF 0.01nF 200kHz 0.01Hz 1090ºC 0.1ºC Accuracy 0.1% 0.5% 0.4% 1.2% 0.4% 1% 0.01% 1% Weight: 88V – 0.6 kg; 78 – 0.42 kg Lifetime Warranty Size (HxWxD): 88V - 200 mm x 95 mm x 48 mm 78 - 190 mm x 89 mm x 45 mm Ordering Information Fluke 88V/A Automotive Meter Combo Kit Fluke 78 Automotive Meter 88V/A - Automotive Meter Combo Kit Automotive Accessories TP81 and TP82 Insulation Piercing Clip Set • • • • TLK282 SureGrip™ Deluxe Automotive Test Lead Kit Kit contains: • TP81 Insulation Piercing Clip Set • TP40 AutomotiveTM Back Probe Pins (five) • TL224 Suregrip TM Silicone Test Lead Set • TP220 Suregrip TM Test Probe Set • AC220 Suregrip Alligator Clip Set • AC285 SuregripTM Large Jaw Alligator Clip Set • AC280 SuregripTM Hook Clip Set • Soft Case Banana jack accepts all DMM and banana jack leads Non-rotating banana jack prevents leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead Available for 4 mm input, modular connection with TP81 or available as a 2 mm input to slip onto probe tips with the TP82 Tested to 60 V DC TP84 Oxygen Sensor Insulation Piercing Clip • Banana jack accepts all DMM and banana jack leads • Non-rotating banana jack prevents • TLK281 SureGrip™ Automotive Test Lead Kit Kit contains: • TP81 InsulationTMPiercing Clip Set • TL224 Suregrip Silicone Test Lead Set • TP220 SuregripTMTM Test Probe Set • AC220 SuregripTM Alligator Clip Set • AC285 Suregrip Large Jaw Alligator Clip Set • Soft Case leads from tangling, allowing you to tighten/loosen clamp while still connected to the test lead Tested to 60 V DC TP88 Rigid Back Probe Pin Set • Slides onto test probes measuring 2 mm • Tested to 60 V DC 90i-610s AC/DC Current Probe (600 A) • Current Range: 2 to 600A DC or AC Peak • Basic Accuracy (DC to 400Hz): +/- (2% of reading + 1A) • Output Signal: 100A range: 10mV/A 600A range: 1mV/A • Frequency Range: 40Hz to 400Hz • Working Voltage: 600V AC rms • Maximum Conductor Diameter: 34 mm TP40 Automotive Back Probe Pins (five) • Banana jack accepts all DMM and banana jack leads • Tested to 60 V DC BP880 BNC to Female Double Stacking Banana Plug BP881 BNC to Male Double Stacking Banana Plug • Allows for hands-free testing in controlled voltage environments 500 VRMS maximum • Banana plug is nickel-plated, beryllium copper for low contact resistance • The BNC shell is plated for tarnish resistance • Operating temperature +50°C maximum RPM80 Inductive Pick-up • Provides RPM readings BP880 BP881 Fluke. Keeping your world up and running. PV350 Pressure Vacuum Module • Compatible with all Fluke and most popular DMMs • Digital pressure and vacuum measurements in a single module • Transducer sealed in 316 stainless steel compatible with variety of liquids and gases • Measures vacuum to 76 cm Hg • Display results in English (psig or Hg) or metric (kPa or cm Hg) units • Measures pressure to 500 psig (3447 kPa) TL28A Automotive Test Lead Set • Flexible silicone insulated leads are heat and cold resistant • Cat I 30 V, 10 A Fluke Corporation Visit us on the world wide web at: P.O. Box 9090 Everett, WA USA 98206 http://www.fluke.com Fluke Europe B.V. P.O. Box 1186 5602 BD Eindhoven The Netherlands Fluke (UK) Ltd. 52 Hurricane Way Norwich Norfolk NR6 6JB United Kingdom Tel.: 0207 942 0700 Fax: 0207 942 0701 E-mail: [email protected] For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446 -5116 In Europe/M-East/Africa +31 (0)40 2 675 200 or Fax +31 (0)40 2 675 222 In Canada (905) 890-7600 or Fax (905) 890-6866 From other countries +1 (425) 446 -5500 or Fax +1 (425) 446 -5116 © Copyright 2004 Fluke Corporation. All rights reserved. Printed in the Netherlands 08/04 Data subject to alteration without notice. Pub_ID: 10761-eng