caps R BIMETAL CUTOUTS Cap in standard execution, material aluminium (code D) R53 R54 R55 Cap for fixed mounting stainless steel (code F) Exposed bimetal cap (code FX) • Deviations from standard controls (caps, terminals, fixings) on request. • Especially for electronic applications with voltage 6…120 Vac / 6…30 Vdc and current 10…100 mA, gold crossbar contacts are available. • Single operation devices (SOD) are available up to 150ºC or with reset temperature -35ºC (type B-2). Ordering and marking example Ordering example Marking example CS-7S R100U norm. closed response temperature R53 CS7 100 2 5 Y __ __ CS710025Y manufacture code 2250 date of manufacture Mounting Bracket D is Std. Optional Terminals Y1 & Z1 are standard Terminals Y= .25” QC Horz. Z=.25” QC Vert. Tolerance 5= +/- 5ºC Contact Configuration 1=NO 2=NC Response Temperature in ºC Model 8415 Mountain Sights Avenue • Montreal (Quebec), H4P 2B8, Canada Tel: (514) 739-3274 • 1-800-561-7207 • Fax: (514) 739-2902 • E-mail: [email protected] Website: www.cantherm.com | Division of Microtherm 2010/Sep R53 Technical data Mounting rings R53 ratings \ control type CS-7S CS-17 R54 R55 B-2 CH-15 CH-152-35 CR71 function automatic SOD automatic SOD manual version normally closed / normally open nc nc / no nc nc 25A/15A 15 (10) 10 10(8) rated current at 250 Vac ( cos φ 0,95 ) VDE switching cycles temperature range TA (steps in 5ºC) rated current at 125/250 UL switching cycles temperature range TA (steps in 5ºC) 10A 25A 100,000 100,000 -20...200ºC 100,000 1 – -20...200ºC 0...220ºC -20...200ºC 25A 15/10 17A 15(10) * 15A/10A 25A/25A 100,000 100,000 1 100,000 1 – -20...200ºC 150ºC 0...200ºC 0...250ºC 0...260ºC 50...200ºC tolerance > +/- 3ºC (+/- 5ºC Typical) contact resistance / Insulation res. / dielectric res. hysteresis / reset temp. (Rt) code drawing dimensions (mm) photo technical description Standard D 23.8mm mounting ring, loose or fixed at 45°, 90°, or 135°. M 25mm mounting ring, loose or fixed at 45°, 90°, or 135°. E 30mm mounting ring, loose. L 41mm mounting bracket fixed at 45°, 90° or 135°. Thru-Hole Mnt. = F Flange Cap mounting, Stainless Steel fixed at 45°, 90° or 135° CS-7S, CS-17, B2, CR-71 approvals UL, CSA, VDE < 50 mΩ / >100 mΩ at 500V / 1500V for 1 minute 20K ±5K deg. of protection provided by enclosures (EN 60529) (Rt) -35ºC 20K ±5K (Rt) -35ºC – IP00 VDE / ENEC approvals 1 60...150ºC type Cert# 40010923 EN 60730-1 / -2-9 / 1-A15 / 1-A16 UL / CUL UL 873 File E50367 CSA C22.2 No.24 File LR85323 * Additional ratings for CS-7 only: 12VDC 15A / 20,000 switching cyles (Not UL, CSA, VDE) 24VDC 10A / 20,000 switching cyles (Not UL, CSA, VDE) 9.5VDC 0.38A / 100,000 switching cyles (UL Approved, Pilot Duty Only) 12VDC 0.075A / 100,000 switching cyles (UL Approved, Pilot Duty Only) For use as a guideline only. CS-7S, B2, CR-71, CS-17 Standard types type R53 CS-7S, CS-17, B2 R55 CR-71 R53 CS-17 R54 CH-15, CH-152-35 nc 2 2 2 2 no code 1 1 drawing dimensions (mm) technical description Term = Z1 Ring = D Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Vertical (Z type) Term = Y1 Ring = D Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) 1 – photo Ring = D Ring = L Ring = None Term = Y7 approvals CS-7S, B2, CR-71 Terminals 6.3 x 0.8, Steel Ni plate, Housing: Ceramic Thermoset, Cap: Aluminum, Loose Bracket, Terminals Horizontal (Y type) UL, CSA, VDE Flange Cap mounting, w/exposed bimetal, Stainless Steel fixed at 45°, 90° or 135° Exposed Bimetal Thru Hole = FX UL, CSA, VDE Terminals Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5 mm Sn or Ni plate, Housing: Thermoset, Cap: SS, Welded Bracket, Terminals Horizontal (Y type) UL, CUL code used in type Y1 [STD] Brass Faston Tin Plate .250 Y2 Brass Faston Tin Plate.187 Y3 Brass Faston Nickel Plate .250 Y4 Brass Faston Nickel Plate .187 Y5 Steel Faston Nickel Plate .250 Y6 Steel Nickel Solder Connection Y7 Brass Nickel Solder Connection CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2 Z1 [STD] Brass Faston Tin Plate .250 Z2 Brass Faston Tin Plate.187 Z3 Brass Faston Nickel Plate .250 Z4 Brass Faston Nickel Plate .187 Z5 Steel Faston Nickel Plate .250 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CH-15 photo drawing dimensions (mm) technical description approvals Horizontal Fastons Faston 6.3mm x 0.8mm 4.8mm x 0.8mm Y6 Solder Connection UL, CSA, VDE UL, CUL, VDE Vertical Fastons 6.3mm x 0.8mm 4.8mm x 0.8mm Technical data Mounting rings R53 ratings \ control type CS-7S CS-17 R54 R55 B-2 CH-15 CH-152-35 CR71 function automatic SOD automatic SOD manual version normally closed / normally open nc nc / no nc nc 25A/15A 15 (10) 10 10(8) rated current at 250 Vac ( cos φ 0,95 ) VDE switching cycles temperature range TA (steps in 5ºC) rated current at 125/250 UL switching cycles temperature range TA (steps in 5ºC) 10A 25A 100,000 100,000 -20...200ºC 100,000 1 – -20...200ºC 0...220ºC -20...200ºC 25A 15/10 17A 15(10) * 15A/10A 25A/25A 100,000 100,000 1 100,000 1 – -20...200ºC 150ºC 0...200ºC 0...250ºC 0...260ºC 50...200ºC tolerance > +/- 3ºC (+/- 5ºC Typical) contact resistance / Insulation res. / dielectric res. hysteresis / reset temp. code drawing dimensions (mm) photo technical description Standard D 23.8mm mounting ring, loose or fixed at 45°, 90°, or 135°. M 25mm mounting ring, loose or fixed at 45°, 90°, or 135°. E 30mm mounting ring, loose. L 41mm mounting bracket fixed at 45°, 90° or 135°. Thru-Hole Mnt. = F Flange Cap mounting, Stainless Steel fixed at 45°, 90° or 135° CS-7S, CS-17, B2, CR-71 approvals UL, CSA, VDE < 50 mΩ / >100 mΩ at 500V / 1500V for 1 minute Set -15...25ºC deg. of protection provided by enclosures (EN 60529) -35ºC -15...25ºC -35ºC – IP00 VDE / ENEC approvals 1 60...150ºC type Cert# 40010923 EN 60730-1 / -2-9 / 1-A15 / 1-A16 UL / CUL UL 873 File E50367 CSA C22.2 No.24 File LR85323 * Additional ratings for CS-7 only: 12VDC 15A / 20,000 switching cyles (Not UL, CSA, VDE) 24VDC 10A / 20,000 switching cyles (Not UL, CSA, VDE) 9.5VDC 0.38A / 100,000 switching cyles (UL Approved, Pilot Duty Only) 12VDC 0.075A / 100,000 switching cyles (UL Approved, Pilot Duty Only) CS-7S, B2, CR-71, CS-17 For use as a guideline only. Standard types type R53 CS-7S, CS-17, B2 R55 CR-71 R53 CS-17 R54 CH-15, CH-152-35 nc 2 2 2 2 no code 1 1 drawing dimensions (mm) technical description Term = Z1 Ring = D Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Vertical (Z type) Term = Y1 Ring = D Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) 1 – photo Ring = D Ring = L Ring = None Term = Y7 approvals CS-7S, B2, CR-71 Terminals 6.3 x 0.8, Steel Ni plate, Housing: Ceramic Thermoset, Cap: Aluminum, Loose Bracket, Terminals Horizontal (Y type) UL, CSA, VDE Flange Cap mounting, w/exposed bimetal, Stainless Steel fixed at 45°, 90° or 135° Exposed Bimetal Thru Hole = FX UL, CSA, VDE Terminals Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5 mm Sn or Ni plate, Housing: Thermoset, Cap: SS, Welded Bracket, Terminals Horizontal (Y type) UL, CUL code used in type Y1 [STD] Brass Faston Tin Plate .250 Y2 Brass Faston Tin Plate.187 Y3 Brass Faston Nickel Plate .250 Y4 Brass Faston Nickel Plate .187 Y5 Steel Faston Nickel Plate .250 Y6 Steel Nickel Solder Connection Y7 Brass Nickel Solder Connection CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2 Z1 [STD] Brass Faston Tin Plate .250 Z2 Brass Faston Tin Plate.187 Z3 Brass Faston Nickel Plate .250 Z4 Brass Faston Nickel Plate .187 Z5 Steel Faston Nickel Plate .250 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CH-15 photo drawing dimensions (mm) technical description approvals Horizontal Fastons Faston 6.3mm x 0.8mm 4.8mm x 0.8mm Y6 Solder Connection UL, CSA, VDE UL, CUL, VDE Vertical Fastons 6.3mm x 0.8mm 4.8mm x 0.8mm caps R BIMETAL CUTOUTS Cap in standard execution, material aluminium (code D) R53 R54 R55 Cap for fixed mounting stainless steel (code F) Exposed bimetal cap (code FX) • Deviations from standard controls (caps, terminals, fixings) on request. • Especially for electronic applications with voltage 6…120 Vac / 6…30 Vdc and current 10…100 mA, gold crossbar contacts are available. • Single operation devices (SOD) are available up to 150ºC or with reset temperature -35ºC (type B-2). Ordering and marking example Ordering example Marking example CS-7S R100U norm. closed response temperature R53 CS7 100 2 5 Y __ __ CS710025Y 2250 manufacture code date of manufacture Mounting Bracket D is Std. Optional Terminals Y1 & Z1 are standard Terminals Y= .25” QC Horz. Z=.25” QC Vert. Tolerance 5= +/- 5ºC Contact Configuration 1=NO 2=NC Response Temperature in ºC Model 8415 Mountain Sights Avenue • Montreal (Quebec), H4P 2B8, Canada Tel: (514) 739-3274 • 1-800-561-7207 • Fax: (514) 739-2902 • E-mail: [email protected] Website: www.cantherm.com | Division of Microtherm 2012/Dec R53