ATC 600S Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: • Lowest ESR in Class • Highest Working Voltage in class – 250V • Standard EIA Size: 0603 • Laser Marking (Optional) • RoHS Compliant • High Self Resonance Frequencies Applications: • Cellular Base Stations • Wireless Communications • Broadband Wireless Services • Satellite Communications • WiMAX (802.16) ATC 600 SERIES OVERVIEW Circuit Applications: • Filter Networks High Q Frequency Sources • Matching Networks • Tuning, Coupling, Bypass and DC Blocking ATC Series 600 600 600 ATC Case Size L S F Electrical Specifications Mechanical Specifications Capacitance: Tolerances: Working Voltage (WVDC): Quality Factor (Q): Operating Temperature Range: Terminations: 0.1 to 100 pF See Cap Value Chart 250 V > 2000 @ 1 MHz -55°C to +125°C (no derating of working voltage) Temperature coefficient of Capacitance (TCC): 0 ± 30 ppm/°C, -55°C to +125° Insulation Resistance: 105 M⍀ min. at +25°C at rated WVDC 104 M⍀ min. at +125°C at rated WVDC Dielectric Withstanding Voltage (DWV): 2.5 x WVDC for 5 seconds Aging: None Piezo Effects: None T EIA Case Size 0402 0603 0805 = Tin Plated over Nickel Barrier* (Standard) TN = Tin Plated over Non-Magnetic Barrier* Solderability: Terminal Strength: W = Tin/Lead Solder Plated over Nickel Barrier Solder coverage > 90% of end termination 4 lbs. Typ., 2 lbs. min. Environmental Specifications Life Test: 2000 hours, +125°C at 2X WVDC Thermal Shock: 5 cycles, -55°C to +125°C Moisture Resistance: 240 hours, 85% Relative Humidity at +85°C Military Approval * DSCC Drawing Number 05002 ATC 600 Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. ISO 9001 REGISTERED COMPANY ATC 001-924; Rev. R, 12/09 ATC 600S Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors Capacitance Values Value (pF) Cap Code Marking Tolerances 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R5 1R6 1R8 2R0 2R2 2R4 A9 H9 M9 d9 f9 m9 n9 t9 y9 A0 B0 C0 D0 E0 F0 G0 H0 J0 K0 Value (pF) Cap Code Marking Tolerances A, B A, B A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 15 18 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 110 120 150 180 L0 M0 N0 P0 Q0 R0 S0 T0 U0 V0 W0 X0 Y0 Z0 A1 B1 C1 E1 G1 A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D B, C, J, K B, C, J, K B, C, J, K B, C, J, K F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Value (pF) Cap Code Marking Tolerances 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 101 H1 J1 K1 L1 M1 N1 P1 Q1 R1 S1 T1 U1 V1 W1 X1 Y1 Z1 A2 F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M *Non-standard values and custom tolerances are available upon request. ATC Part Number Code 600 S 0R 2 B T 250 X ATC Series T Packaging T - Tape and Reel (Standard)* TV - Vertical Tape and Reel (Optional) Case Size (0603) Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Laser Marked** Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Termination Code T = Tin Plated over Nickel Barrier (Standard) RoHS Compliant TN = Tin Plated over Non-Magnetic Barrier W = Tin/Lead Solder Plated over Nickel Barrier Capacitance Tolerance TOLERANCE CODE TABLE Code A B C D F G J K M Tol. ±0.05pF ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20% *4,000 pieces on 7'' reel and 500 pieces on prototype reel. Consult ATC for other options. The above part number refers to a 600S Series (case size S) 0.2 pF capacitor, B tolerance (±0.1pF), 250 WVDC, with T termination (Tin Plated over Nickel Barrier, RoHS Compliant), Laser Marking and Tape and Reel packaging. ** Marking is optional. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America +1-631-622-4700 • [email protected] For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. *Consult factory for 500 piece reels for prototyping. Consult factory for additional performance data. T E C H N I C A L ATC Europe +46 8 6800410 • [email protected] C E R A M I C S ATC Asia 86-755-2396-8759 • [email protected] w w w . a t c e r a m i c s . c o m 2 ATC 600S Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors Typical Performance Data A M E R I C A N ATC North America +1-631-622-4700 • [email protected] T E C H N I C A L ATC Europe +46 8 6800410 • [email protected] C E R A M I C S ATC Asia 86-755-2396-8759 • [email protected] w w w . a t c e r a m i c s . c o m 3 ATC 600S Series Ultra-Low ESR, High Q NPO RF & Microwave Capacitors ATC 600 Series Data Sheet Test Condition Description Capacitors horizontally mounted on 13.3-mil thick Rogers RO4350® softboard, 29-mil wide, 1/2 oz. Cu traces. FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart. FPR = lowest frequency at which there is a notch in S21 magnitude response. A M E R I C A N ATC North America +1-631-622-4700 • [email protected] T E C H N I C A L ATC Europe +46 8 6800410 • [email protected] C E R A M I C S ATC Asia 86-755-2396-8759 • [email protected] w w w . a t c e r a m i c s . c o m 4 ATC 600S Series Ultra-Low, High Q ESR, NPO RF & Microwave Capacitors Outline Dimensions Y L: .063 ± .006 (1.60 ± .15) W T: .035 max. (0.89 max.) Y: .014 ± .006 (0.36 ± 0.15) S (0603) W: .032 ± .006 (.81 ± .15) Inches (mm) T L Suggested Mounting Pad Dimensions W L T L 9 H H9 T W Horizontal Electrode Orientation Vertical Electrode Orientation B A B C Case Size Case Sizes L, S and F A Min. B Min. C Min. D Min. .0236 (0.60) .110 (2.80) 0402 (1005) .0275 (0.70) .0354 (0.90) .0157 (0.40) 0805 (2012) .0590 (1.50) .0512 (1.30) .0236 (0.60) 0603 (1608) D .0393 (1.00) .0433 (1.10) .0866 (2.20) .1259 (3.20) Inches (mm) Design Kits Each Kit contains a selection of standard capacitor values for circuit prototyping. Kit # Kit 25T Kit 26T Kit 27T Item # DK0025T Cap. Value Range (pF) Description 600S Series Ultra-low ESR, High Q Microwave Capacitors 0.1 to 2.0 Cap. Values (pF) Tol. (pF) 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5 ±0.1 1.6, 1.8, 2.0 ±0.25 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3 ±0.1 3.9, 4.7, 5.6, 6.8, 8.2 ±0.25 10 ±5% 10, 12, 15, 18, 20, 22, 24, 27, 30, 33, 39, 47, 56, 68, 82, 100 ±5% $90.00 16 different values, 15 pcs. min. per value DK0026T 600S Series Ultra-low ESR, High Q Microwave Capacitors 1.0 to 10 16 different values, 15 pcs. min. per value DK0027T 600S Series Ultra-low ESR, High Q Microwave Capacitors 16 different values, 15 pcs. min. per value 10 to 100 Price $90.00 $90.00 For Online Kit Orders, Catalog & Application Notes, Visit: www.atceramics.com A M E R I C A N ATC North America +1-631-622-4700 • [email protected] T E C H N I C A L ATC Europe +46 8 6800410 • [email protected] C E R A M I C S ATC Asia 86-755-2396-8759 • [email protected] w w w . a t c e r a m i c s . c o m 5 Other ATC Product Catalogs Multilayer Capacitors & Power Assemblies Inductor Products Custom Thin Film Products High Power Resistive Products Single Layer Capacitors Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. © 1999 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-924; Rev. R, 12/09 ISO 9001 REGISTERED COMPANY 6