ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Features: • Lowest ESR in Class • Highest Working Voltage in Class – 200V • Standard EIA Size: 0402 • High Self Resonance Frequencies Applications: • Subscriber-based Wire• Cellular Base Stations less Devices • Broadband Wireless • WiFi (802.11) Services • Satellite Communications • WiMAX (802.16) Circuit Applications: • Filter Networks • High Q Frequency Sources ATC 600 SERIES OVERVIEW • Matching Networks • Tuning, Coupling, Bypass and DC Blocking ATC Series 600 600 600 ATC Case Size L S F Electrical Specifications Mechanical Specifications Capacitance: 0.1 to 27 pF Terminations: Tolerances: See Cap Value Chart Temperature coefficient of Capacitance (TCC): Insulation Resistance: -55°C to +125°C (no derating of working voltage) 0 ± 30 ppm/°C, -55°C to +125°C 10 5 M⍀ min. at +25°C at rated WVDC 10 4 M∆ min. at +125°C at rated WVDC Dielectric Withstanding Voltage (DWV): 2.5 x WVDC for 5 seconds Aging: None Piezo Effects: None T = Tin Plated over Nickel Barrier* (Standard) TN = Tin Plated over NonMagnetic Barrier* Working Voltage (WVDC): 200 V Quality Factor (Q): > 2000 @ 1 MHz Operating Temperature Range: EIA Case Size 0402 0603 0805 W = Tin/Lead Solder Plated over Nickel Barrier Solderability: Solder coverage > 90% of end termination Terminal Strength: 2 lbs. typ., 1 lb. min. Environmental Specifications Life Test: WVDC Thermal Shock: 2000 hours, +125°C at 2X Moisture Resistance: 240 hours, 85% Relative Humidity at +85°C Military Approval 5 cycles, -55°C to +125°C * DSCC Drawing Number 05003 ATC 600 Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. ISO 9001 REGISTERED COMPANY ATC # 001-976; Rev L, 1/11 ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Capacitance Values* Value (pF) Cap Code Tolerances Value (pF) Cap Code Tolerances Value (pF) Cap Code Tolerances 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.5 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R5 A, B A, B A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 1R6 1R8 2R0 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D A, B, C, D 6.2 6.8 7.5 8.2 9.1 10 11 12 15 18 20 22 24 27 6R2 6R8 7R5 8R2 9R1 100 110 120 150 180 200 220 240 270 A, B, C, D B, C, J, K B, C, J, K B, C, J, K B, C, J, K F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M *Non-standard values and custom tolerances are available upon request. ATC Part Number Code 600 L 10 0 J T 200 T ATC Series Packaging Case Size (0402) T - Tape and Reel (Standard)* Capacitance Code: First 2 significant digits for capacitance. R=Decimal Point Indicates number of zeros following digits of capacitance in picofarads except for decimal values. WVDC Capacitance Tolerance Termination Code T = Tin Plated over Nickel Barrier (Standard) RoHS Compliant TN = Tin Plated over Non-Magnetic Barrier W = Tin/Lead Solder Plated over Nickel Barrier TOLERANCE CODE TABLE Code A B C D F G J K M Tol. ±0.05pF ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20% *10,000 pieces on 7'' reel, 4000 pieces on 7'' reel and 500 pieces on prototype reel. Consult ATC for other options. The above part number refers to a 600L Series (case size L) 10 pF capacitor, J tolerance (±5%), 200 WVDC, with T termination (Tin Plated over Nickel Barrier, RoHS Compliant), Tape and Reel packaging. ATC accepts orders for our parts using designations with or without the “ATC” prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the “ATC” prefix are interchangeable to parts referenced without the “ATC” prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. A M E R I C A N ATC North America [email protected] 2 For additional information and catalogs contact your ATC representative or call direct at (+1-631) 622-4700. Consult factory for 500 piece reels for prototyping. Consult factory for additional performance data. T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www. at c er am ic s .c om ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors 600L ESR vs. Frequency ESR (Ohms) 1 27 pF 15 pF 8.2 3.3 pF 1.0 pF 0.1 (Typical) 0.01 100 1000 10000 Frequency (MHz) Frequency (GHz) 600L Resonant Frequency Data ) 0.1 1.0 100.0 10.0 Capacitance (pF) ATC 600L Series Data Sheet Test Condition Description Capacitors mounted in series microstrip configuration on 10-mil thick Rogers RO4350® softboard, 22-mils wide 1/2 oz. Cu traces. FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart. FPR = lowest frequency at which there is a notch in S21 magnitude response. A M E R I C A N ATC North America [email protected] T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] ww w.at c er am ic s .c om 3 ATC 600L Series Ultra-Low ESR, High Q, NPO RF & Microwave Capacitors Outline Dimensions Y L: .040 ± .004 (1.02 ± 0.1) W: .020 ± .004 (.51 ± 0.1) L (0402) W T: .024 max. (0.60 max.) Y: .010 ± .006 (0.25 ± 0.15) Inches (mm) T L Suggested Mounting Pad Dimensions W L Case Sizes L, S and F T B B C A Case Size A Min. B Min. C Min. D Min. 0402 (1005) .0275 (0.70) .0354 (0.90) .0157 (0.40) .0866 (2.20) 0603 (1608) .0393 (1.00) .0433 (1.10) .0236 (0.60) .110 (2.80) 0805 (2012) .0590 (1.50) .0512 (1.30) .0236 (0.60) .1259 (3.20) D Inches (mm) Design Kits Each Kit contains a selection of standard capacitor values for circuit prototyping. Kit # Kit 36T Kit 37T Kit 38T Item # DK0036T Cap. Value Range (pF) Description 600L Series Ultra-low ESR, High Q Microwave Capacitors 0.1 to 2.0 Cap. Values (pF) 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.5 ±0.1 1.6, 1.8, 2.0 ±0.25 1.0, 1.2, 1.5, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3 ±0.1 3.9, 4.7, 5.6, 6.8, 8.2 ±0.25 10 ±5% 10, 12, 15, 18, 20, 22, 24, 27 ±5% 16 different values, 15 pcs. min. per value DK0037T 600L Series Ultra-low ESR, High Q Microwave Capacitors 6 1.0 to 10 16 different values, 15 pcs. min. per value DK0038T 600L Series Ultra-low ESR, High Q Microwave Capacitors 10 to 27 Tol. (pF) Price $90.00 $90.00 $50.00 8 different values, 15 pcs. min. per values For Online Kit Orders, Catalog & Application Notes, Visit: www.atceramics.com Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992 Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice. ATC # 001-976; Rev L, 1/11 © 2003 American Technical Ceramics Corp. All Rights Reserved. A M E R I C A N ATC North America [email protected] T E C H N I C A L C E R A M I C S ATC Europe [email protected] ATC Asia [email protected] www. at c er am ic s .c om 4