E-blocks™ Multiprogrammer PICmicro® microcontroller programmer and development board EB006 matrix multimedia • E-blocks compatible • Can be used as a programmer and as a development board • Programs a wide range of PICmicro MCU devices • RC or Xtal operation • 5 I/O ports • Interchangeable crystal • Fitted with PIC16F88 as standard • Comprehensive programming utility provided • Lite version of 3 CD ROMs provided This new PICmicro microcontroller programmer connects to your PC via USB to provide you with one of the World’s lowest cost and most flexible PICmicro® microcontroller programmers. This board can be used with Assembly, C or Flowcode programming utilities provided by Matrix Multimedia. The board will program most 8, 14, 18, 28 and 40 pin PICmicro microcontroller devices using the flexible programming software provided – PPP - and provides ‘clean’ access to all I/O lines on the relevant PICmicro MCU devices. Full programming software – PPP – is provided. A description of PPP and a list of compatible PICmicro devices is given below. This board is part of the E-blocks ™ family of products: 1 Power connector - unregulated 12V supply via PSU jack (positive outer) or 2 terminal screw connector 2 USB connector 3 Reset switch 4 Port E – up to 3 lines 5 Port A – up to 5 lines 6 Port B – up to 8 lines 7 Port C – up to 8 lines 8 Port D – up to 8 lines 9 RC clock speed control – fast and slow 10 Oscillator select switches – the board operates from RC circuit or Crystal circuit 11 Crystal fitted in a socket – this can be removed for different applications 12 Screw terminals for power connections – including 5V out 13 PICmicro microcontroller sockets – supports 8, 14, 18, 28, and 40 pin devices This product includes: PPP programming utility Sampler CD ROM Matrix Multimedia Limited Tel 0870 700 1831 Fax 0870 700 1832 www.matrixmultimedia.co.uk [email protected] PPP programming utility PPP is compatible with our ranges of programming utilities and courses: C for PICmicro microcontrollers V3.0 PPP is a highly functional utility for managing the HEX code that is sent into your PICmicro microcontroller. ASCIIencoded and HEX files generated by MPASM can be sent to a device using PPP. PPP uses a simple user interface which is explained in the accompanying help file. PPP is supplied free with the development board. PPP screen images Minimum requirements Pentium 100MHz, Parallel port or USB port, 2 Megabytes of hard drive space, 16 Megabytes of RAM, Windows 98/ME/2000/XP PPP configuration screen Supported devices Flowcode for PICmicro microcontrollers V2.0 Assembly for PICmicro microcontrollers V2.0 Currently PPP and the development board support the following devices: PIC12C671, PIC12C672, PIC12CE673, PIC12CE674 PIC12F629, PIC12F675, PIC16C554, PIC16C558, PIC16C61, PIC16C62, PIC16C620, PIC16C620A, PIC16C62, PIC16C621A, PIC16C622, PIC16C622A, PIC16C62A, PIC16C62B, PIC16C63, PIC16C63A, PIC16C64, PIC16C64A, PIC16C65, PIC16C65A, PIC16C65B, PIC16C66, PIC16C67, PIC16C71, PIC16C710, PIC16C711, PIC16C712, PIC16C715, PIC16C716, PIC16C72, PIC16C72A, PIC16C73, PIC16C73A, PIC16C73B, PIC16C74, PIC16C745, PIC16C74A, PIC16C74B, PIC16C76, PIC16C765, PIC16C77, PIC16C773, PIC16C774, PIC16C84, PIC16CE623, PIC16CE624, PIC16CE625, PIC16CR62, PIC16CR620A, PIC16CR63, PIC16CR64, PIC16CR65, PIC16CR72, PIC16CR83, PIC16CR84, PIC16F627, PIC16F627A, PIC16F628, PIC16F628A, PIC16F630, PIC16F648A, PIC16F676, PIC16F684, PIC16F688, PIC16F716, PIC16F72, PIC16F73, PIC16F737, PIC16F74, PIC16F747, PIC16F76, PIC16F767, PIC16F77, PIC16F777, PIC16F818, PIC16F819, PIC16F83, PIC16F84, PIC16F84A,PIC16F87, PIC16F870, PIC16F871, PIC16F872, PIC16F873, PIC16F873A, PIC16F874, PIC16F874A, PIC16F876, PIC16F876A, PIC16F877, PIC16F877A, PIC16F88 Hex file display screen Matrix Multimedia Limited Tel 0870 700 1831 Fax 0870 700 1832 www.matrixmultimedia.co.uk [email protected]