edm Wizard 2 microATX Form Factor Carrier Board for EDM Type 2 System-on-Modules External Display Touch Controller Connector Audio Codec Connector Sensors Real Time Clock 2x HDMI 2 channel 18/24 bit LVDS Jumper selectable: TSC2046 (4 wire by SPI) TSC2004 (4 wire by I2C) ADS7845 (5 wire by SPI) USB 4/5 wire touch controller 4 wire touchpanel (USB/I2C/SPI) 5 wire touchpanel (USB/SPI) Jumper selectable: Freescale SGTL5000 (I2S) TI TLV320AIC23B (I2S) Realtek ALC892-CG (HDA) 5x 3.5 mm jack Surround audio S/PDIF Expansion slots Ethernet USB Storage Connector Transformer Header LAN GPIO Button RJ45 Header Connector UART Header UART EEPROM RTC I2C SPI Header Touch EEPROM PCI mPCIe + SIM mPCIe + SIM CAN Header CAN Header SATA SATA SATA SATA 2W amplifier I2S audio audio SDIO SD PCIe PCIe PCIe PCIe LVDS LVDS LVDS LVDS HDMI 12 VDC Input RTC 2x mini-PCIe + SIM cardslot (for 3G communication) 1x PCIe x1 expansion slot 1x PCIe x4 expansion slot 1x Gigabit LAN 2x USB 3.0 Host 1x micro-USB 3.0 / 2.0 OTG 1x USB 2.0 Host Mechanical and Environmental Temperature Humidity Module Connector Form Factor Dimensions MTBF Weight Shock Vibration Commercial: 0° to 60° C 10-90% 314 pins MXM3 microATX 244 x 244 mm (9⅝ x 9⅝ inch) >100,000 hours 380 grams 50G / 25ms 20G / 0-600 Hz Speaker I2C x2 12V RSVD Buttons + GPIO Line in UART x2 HDA SPI x2 Expansion and Connectivity Dimensions units in mm 2x SATA 1x SD cardslot (SDIO) Communication and Control Header 2x CAN Bus 2x UART (RS-232/422/485) 2x SPI (shared with EEPROM) 2x I2C (shared with EEPROM) LPC (Low pincount) 8x GPIO (shared with buttons) Reserved / manufacturing pins Power Specifications Input power Maxim Integrated DS1337+ IS 1st SD Mic USB Host 2 CANBus x2 Line out USB OTG SPDIF SPDIF SATA 1st HDA Connector PCIe x2 LPC 5V 12 VDC or Smart Battery 243,84 Ordering Information EDM2-WIZARD-START EDM Type 2 Evaluation board including cablekit and adaptor The Wizard design files including schematics and gerber files are available to design your own EDM Carrier Board. 2013-03. All specifications are subject to change without notice. Video EDM Type 2 compliant SATA 2nd PCI x16 SMART BATTERY MODULE 243,84 System on Module HDMI PCIe x4 HDMI HDMI LVDS Core System HDMI LAN RS-232 RS-422 RS-485 314 pin EDM connector HDMI LVDS Power 5 VDC PCIe USB HUB 3.0 PCIe OTG 3.0/ 2.0 Optional smart battery pack implementation. USB Wide range of jumper selectable audio, video and touch interfaces. USB Connector The official EDM type 2 Evaluation Carrier Board brings you a rich variety of interfaces and options at your fingertips. Connector USB HUB 2.0