8 7 4 5 6 1 2 3 REVISIONS REV. ECO. NO DESCRIPTION DATE BY A 1255 INITIAL RELEASE 1/24/2007 MNH E F D F B A .100 2.54 E 2X E .075[1.90] CARDSLOT .125 3.18 C F .265 6.73 INSERTION DEPTH A D .186 4.72 D .431 10.95 .245 6.22 .440±.025 11.19±0.64 TAIL LENGTH .025 0.64 FITS C .043 HOLE _ _ C _ _ DRYH C .140 3.56 ROW SPACING A SECTION A - A CONTACT MARKINGS B 1 2 3 ... 60 B A 1 2 3 ... 60 A B A B NOTES: 1. INSULATOR MATERIAL: SEE PART NUMBER CODING 2. CONTACT MATERIAL: SEE PART NUMBER CODING 3. PLATING: SEE PART NUMBER CODING CONTACT ID 4. OPERATING TEMPERATURE: SEE PART NUMBER CODING SCALE 2:1 5. PROCESSING TEMP: SEE PART NUMBER CODING 6. UL FLAMMABILITY RATING: 94V-0 7. VOLTAGE RATING: 600 VDC MINIMUM AT SEA LEVEL. 8. CURRENT RATING: 3 AMP PER CONTACT PAIR 9. VOLTAGE DROP: 30 MILLI VOLT AT RATED CURRENT 10. INSULATION RESISTANCE: 5000 MEGA OHM 11. CONNECTOR IDENTIFICATION: THE PART SHALL BE MARKED WITH A PART NUMBER AND BARCODE 12. BOARD THICKNESS ACCOMMODATED: .062 .008" 13. BOARD INSERTION FORCE: 16 OZ MAX PER CONTACT PAIR WHEN USING A .062" TEST BLADE. INTERNAL INSPECTION TO BE PER SULLIN'S WORK INSTRUCTION W17.3-01. 14. BOARD WITHDRAWAL FORCE: 1 OUNCE MINIMUM PER CONTACT PAIR USING .062" PCB 8 7 6 5 CUSTOMER COPY UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES[MM] TOLERANCES: ANGULAR: 1 .XX= .02 [.508] .XXX= .005 [.1270] .XXXX= .0005 [.0127] PARENTHETICAL INFORMATION IS FOR REFERENCE ONLY RoHS COMPLIANT 4 DATE DRAWN A EDGECARD, .100 CC LP _ _C_ _DRY_ SIZE DWG. NO. C INTERPRET DIMENSIONS AND GEOMETRIC TOLERANCING PER: ANSI Y14.5-1984 3 SULLINS ELECTRONICS NAME MNH THE INFORMATION HEREIN CONTAINS PROPRIETARY INFORMATION OF SULLINS ELECTRONICS AND IS NOT DESCRIPTION TO BE REPRODUCED, USED OR DISCLOSED TO OTHERS FOR ANY PURPOSE EXCEPT AS SPECIFICALLY PART NUMBER AUTHORIZED IN WRITING BY AN OFFICER OFSULLINS ELECTRONICS. REV C10879 SCALE: 2:1 2 A SHEET 1 OF 3 1 FILE NAME: Z:\Components\Part Assemblies\Customer Drawings\Customer Drawings for Catalog\C10879, _ _C_ _DRY_ PRINT: 3/2/2007 8 7 5 6 4 1 2 3 F F D C 4X .125 3.18 E E .135 3.43 _ _ C _ _ DRYS _ _ C _ _ DRYN D D 2X FLOATING BOBBIN .116 2.95 CLEARANCE FOR # 4 SCREW D D .116 CLEARANCE HOLE (FOR #4-40 SCREW) 2X #4-40 THREADED INSERTS C C .280 7.11 _ _ C _ _ DRYF B B _ _ C _ _ DRYEI CUSTOMER COPY UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES[MM] TOLERANCES: ANGULAR: 1 .XX= .02 [.508] .XXX= .005 [.1270] .XXXX= .0005 [.0127] PARENTHETICAL INFORMATION IS FOR REFERENCE ONLY A RoHS COMPLIANT 8 7 6 5 4 DATE DRAWN A EDGECARD, .100 CC LP _ _C_ _DRY_ SIZE DWG. NO. C INTERPRET DIMENSIONS AND GEOMETRIC TOLERANCING PER: ANSI Y14.5-1984 3 SULLINS ELECTRONICS NAME MNH THE INFORMATION HEREIN CONTAINS PROPRIETARY INFORMATION OF SULLINS ELECTRONICS AND IS NOT DESCRIPTION TO BE REPRODUCED, USED OR DISCLOSED TO OTHERS FOR ANY PURPOSE EXCEPT AS SPECIFICALLY PART NUMBER AUTHORIZED IN WRITING BY AN OFFICER OFSULLINS ELECTRONICS. REV C10879 SCALE: 2:1 2 A SHEET 2 OF 3 1 FILE NAME: Z:\Components\Part Assemblies\Customer Drawings\Customer Drawings for Catalog\C10879, _ _C_ _DRY_ PRINT: 3/2/2007 8 F E D C 7 4 5 6 NO. OF PART A.008[0.20] POS. NUMBER IN MM _ _ C04DRY _ * 4 0.300 7.62 _ _ C05DRY _ 5 0.400 10.16 _ _ C06DRY _ 6 0.500 12.70 _ _ C07DRY _ 7 0.600 15.24 _ _ C08DRY _ 8 0.700 17.78 _ _ C10DRY _ 10 0.900 22.86 _ _ C12DRY _ 12 1.100 27.94 _ _ C13DRY _ 13 1.200 30.48 _ _ C15DRY _ 15 1.400 35.56 _ _ C17DRY _ 17 1.600 40.64 _ _ C18DRY _ 18 1.700 43.18 _ _ C19DRY _ 19 1.800 45.72 _ _ C20DRY _ 20 1.900 48.26 _ _ C22DRY _ 22 2.100 53.34 _ _ C23DRY _ * 23 2.200 55.88 _ _ C25DRY _ 25 2.400 60.96 _ _ C26DRY _ 26 2.500 63.50 _ _ C28DRY _ 28 2.700 68.58 _ _ C30DRY _ 30 2.900 73.66 _ _ C31DRY _ 31 3.000 76.20 _ _ C35DRY _ 35 3.400 86.36 _ _ C36DRY _ 36 3.500 88.90 _ _ C40DRY _ 40 3.900 99.06 _ _ C43DRY _ 43 4.200 106.68 _ _ C44DRY _ 44 4.300 109.22 _ _ C49DRY _ 49 4.800 121.92 _ _ C50DRY _ 50 4.900 124.46 _ _ C52DRY _ * 52 5.100 129.54 _ _ C60DRY _ 60 5.900 149.86 _ _ C65DRY _ 65 6.400 162.56 * CONSULT FACTORY FOR AVAILABILITY B.008[0.20] IN MM 0.500 12.70 0.600 15.24 0.700 17.78 0.800 20.32 0.900 22.86 1.100 27.94 1.300 33.02 1.400 35.56 1.600 40.64 1.800 45.72 1.900 48.26 2.000 50.80 2.100 53.34 2.300 58.42 2.400 60.96 2.600 66.04 2.700 68.58 2.900 73.66 3.100 78.74 3.200 81.28 3.600 91.44 3.700 93.98 4.100 104.14 4.400 111.76 4.500 114.30 5.000 127.00 5.100 129.54 5.300 134.62 6.100 154.94 6.600 167.64 C.015[0.38] IN MM 0.675 17.15 0.775 19.69 0.875 22.23 0.975 24.77 1.075 27.31 1.275 32.39 1.475 37.47 1.575 40.01 1.775 45.09 1.975 50.17 2.075 52.71 2.175 55.25 2.275 57.79 2.475 62.87 2.575 65.41 2.775 70.49 2.875 73.03 3.075 78.11 3.275 83.19 3.375 85.73 3.775 95.89 3.875 98.43 4.275 108.59 4.575 116.21 4.675 118.75 5.175 131.45 5.275 133.99 5.475 139.07 6.275 159.39 6.775 172.09 D .010[0.25] IN MM 0.975 24.77 1.075 27.31 1.175 29.85 1.275 32.39 1.375 34.93 1.575 40.01 1.775 45.09 1.875 47.63 2.075 52.71 2.275 57.79 2.375 60.33 2.475 62.87 2.575 65.41 2.775 70.49 2.875 73.03 3.075 78.11 3.175 80.65 3.375 85.73 3.575 90.81 3.675 93.35 4.075 103.51 4.175 106.05 4.575 116.21 4.875 123.83 4.975 126.37 5.475 139.07 5.575 141.61 5.775 146.69 6.575 167.01 7.075 179.71 1 2 3 E.020[0.51] IN MM 1.275 32.39 1.375 34.93 1.475 37.47 1.575 40.01 1.675 42.55 1.875 47.63 2.075 52.71 2.175 55.25 2.375 60.33 2.575 65.41 2.675 67.95 2.775 70.49 2.875 73.03 3.075 78.11 3.175 80.65 3.375 85.73 3.475 88.27 3.675 93.35 3.875 98.43 3.975 100.97 4.375 111.13 4.475 113.67 4.875 123.83 5.175 131.45 5.275 133.99 5.775 146.69 5.875 149.23 6.075 154.31 6.875 174.63 7.375 187.33 F±.005[0.13] IN MM F 0.330 8.38 E D 0.400 10.16 C PART NUMBER CODING _ _ C _ _ DRY _ MATERIAL (INSULATOR/CONTACT) B A MOUNTING STYLE E=PBT/PHOSPHOR BRONZE OPERATING TEMP: -65°C TO +125°C PROCESSING TEMP: 260°C FOR 10 SECS MAX R=PPS/PHOSPHOR BRONZE OPERATING TEMP: -65°C TO +125°C PROCESSING TEMP: 260°C FOR 120 SECS MAX G=PA9T/PHOSPHOR BRONZE OPERATING TEMP: -65°C TO +125°C PROCESSING TEMP: 260°C FOR 120 SECS MAX H=PBT/BERYLLIUM COPPER OPERATING TEMP: -65°C TO +125°C PROCESSING TEMP: 260°C FOR 10 SECS MAX A=PPS/BERYLLIUM COPPER OPERATING TEMP: -65°C TO +150°C PROCESSING TEMP: 260°C FOR 120 SECS MAX J=PA9T/BERYLLIUM COPPER OPERATING TEMP: -65°C TO +150°C PROCESSING TEMP: 260°C FOR 120 SECS MAX F=PPS/SPINODAL (CONSULT FACTORY) OPERATING TEMP: -65°C TO +200°C C=PPS/BERYLLIUM NICKEL (CONSULT FACTORY) OPERATING TEMP: -65°C TO +200°C PROCESSING TEMP: 260°C FOR 120 SECS MAX W=PEEK/BERYLLIUM NICKEL (CONSULT FACTORY) OPERATING TEMP: -65°C TO +250°C H= I= S= N= F= NUMBER OF POSITIONS .125" DIA. CLEARANCE HOLES (PAGE 1) #4-40 THREADED INSERT (PAGE 2) .125" DIA. SIDE MOUNTING (PAGE 2) NO MOUNTING EARS (PAGE 2) FLOATING BOBBIN (PAGE 2) PLATING B ALL PLATINGS HAVE .000050" NICKEL UNDERPLATE CONTACT SURFACE TERMINATION G = .000010" GOLD .000005" GOLD Y = .000030" GOLD .000005" GOLD B = .000010" GOLD .000100" PURE TIN, MATTE C = .000030" GOLD .000100" PURE TIN, MATTE **E = .000100" PURE TIN, MATTE OVERALL S = .000010" GOLD OVERALL M = .000030" GOLD .000010" GOLD OVERALL LEAD FREE **ONLY AVAILABLE ON MATERIAL CODES E, R AND G CUSTOMER COPY UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES[MM] TOLERANCES: ANGULAR: 1 .XX= .02 [.508] .XXX= .005 [.1270] .XXXX= .0005 [.0127] PARENTHETICAL INFORMATION IS FOR REFERENCE ONLY RoHS COMPLIANT 8 7 6 5 4 DATE DRAWN A EDGECARD, .100 CC LP _ _C_ _DRY_ SIZE DWG. NO. C INTERPRET DIMENSIONS AND GEOMETRIC TOLERANCING PER: ANSI Y14.5-1984 3 SULLINS ELECTRONICS NAME MNH THE INFORMATION HEREIN CONTAINS PROPRIETARY INFORMATION OF SULLINS ELECTRONICS AND IS NOT DESCRIPTION TO BE REPRODUCED, USED OR DISCLOSED TO OTHERS FOR ANY PURPOSE EXCEPT AS SPECIFICALLY PART NUMBER AUTHORIZED IN WRITING BY AN OFFICER OFSULLINS ELECTRONICS. REV C10879 SCALE: 2:1 2 A SHEET 3 OF 3 1 FILE NAME: Z:\Components\Part Assemblies\Customer Drawings\Customer Drawings for Catalog\C10879, _ _C_ _DRY_ PRINT: 3/2/2007