EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Bi-Color (Multi-Color) Top LEDs 67-22VRVGC/TR8 Features ․P-LCC-4 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Ideal for backlight and light pipe application. ․Inter reflector. ․Low (2mA) current operation. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. Descriptions ․The 67-22 series is available in soft orange, green, blue and yellow.Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector, this feature makes the SMT TOP LED ideal for light pipe application.The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlight in dashboards and switches. ․Telecommunication: indicator and backlight in elephone and fax. ․Indicator and backlight for audio and video equipment. ․Indicator and backlight in office and family equipment. ․Flat backlight for LCD’s, switches and symbols. ․Light pipe application. ․General use. Device Selection Guide Chip Material AlGaInP GaP Emitted Color Hi-Eff Red GaAsP/GaP GaP Green Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Lens Color Water Clear Rev. 2.1 Page: 1 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Package Dimensions CL 2.8 ± 0.2 2.2 ± 0.1 CL 3 0.7 ± 0.1 1 4 2 Green Yellow Red -1 3 + 2 4 - + 3.2 ± 0.2 3.5 ± 0.2 2.8 ± 0.2 0.5 ± 0.1 2.4 ± 0.1 0.2 ±1.8 0.8 ± 0.1 0.1 ± 0.71 0.15± 0.05 2.7 ± 0.2 For reflow soldering (propose) 0.8 ± 0.1 1.8 ± 0.1 1.6 ±0.1 1.8 ± 0.1 0.7 ± 0.1 2.2 ± 0.1 Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 2 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Absolute Maximum Ratings Ta=25℃ Parameter Symbol Rating Unit Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Soldering Temperature Tsol Electrostatic Discharge ESD 2000 V Reverse Voltage VR 5 V Power Dissipation Pd Forward Current IF Peak Forward Current (Duty 1/10 @ 1KHZ) IFP 260 (for 5 second) VR 100 VG 100 VR 30 VG 30 VR 60 VG 60 ℃ mW mA mA Electro-Optical Characteristics Ta=25℃ Parameter *Symbol Min. Typ. Max. VR 6 10 ----- VG 8 15 ----- VR ----- 640 ----- VG ----- 570 ----- VR ----- 605 ----- VG ----- 571 ----- VR ----- 45 ----- VG ----- 30 ----- VR 1.7 2.0 2.4 VG 1.7 2.1 2.4 2θ1/2 ----- 130 IR ----- ----- IV Luminous Intensity λp Peak Wavelength Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage Viewing Angle Reverse Current VF Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Unit Condition mcd IF=20mA nm IF=20mA nm IF=20mA nm IF=20mA V IF=20mA ----- deg IF=20mA 10 μA VR=5V Rev. 2.1 Page: 3 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Typical Electro-Optical Characteristics Curves VR Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 4 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Typical Electro-Optical Characteristics Curves VG Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 5 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 6 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Desiccant Rev. 2.1 Label Page: 7 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items 1 Reflow Soldering 2 Temperature Cycle 3 4 5 Thermal Shock High Temperature Storage Low Temperature Storage Test Condition Temp. : 260℃±5℃ Min. 5sec. H : +100℃ 15min ∫ 5 min L : -40℃ 15min Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 300 Cycles 22 PCS. 0/1 H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 8 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 9 of 10 Prepared by: Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-22VRVGC/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-672-001 Prepared date: 08-05-2004 Rev. 2.1 Page: 10 of 10 Prepared by: Teresa