EVERLIGHT ELECTRONICS CO.,LTD Technical Data Sheet Bi-Color (Multi-Color) Top View LEDs 67-22UYOSYGC/S530-A3/E2/TR8 Features P-LCC-4 package. White package Optical indicator. Colorless clear window. Ideal for backlight and light pipe application. Inter reflector. Low (2mA) current operation. Wide viewing angle. Computable with automatic placement equipment. Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. Available on tape and reel (8mm Tape). Pb-free The product itself will remain within RoHS compliant version. Descriptions The 67-22 series is available in soft orange, green, blue and yellow.Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector, this feature makes the ideal for light pipe application.The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications Automotive: backlight in dashboards and switches. Telecommunication: indicator and backlight in telephone and fax. Indicator and backlight for audio and video equipment. Indicator and backlight in office and family equipment. Flat backlight for LCD’s, switches and symbols. Light pipe application. General use. Device Selection Guide Chip Type Material Emitted Color UYO AlGaInP Brilliant Orange SYG AlGaInP Brilliant Yellow Green Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Package Dimensions 2 CL 1 4 3 2 SYG 4 1 UYO 2.8±0.2 3 0.7±0.1 2.2±0.1 CL 3.2±0.2 3.5±0.2 1.9±0.2 0.15±0.05 0.8±0.1 0.5±0.1 2.4±0.1 2.8±0.2 2.7±0.2 For reflow soldering(propose) 0.8±0.1 1.6 1.8 0.7 2.2 1.8 Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are ±0.1mm. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40~ +100 ℃ Electrostatic Discharge(HBM) ESD Power Dissipation Pd Peak Forward Current UYO:25 UYO:2000 V SYG:2000 UYO:60 mW SYG:60 UYO:60 IFP (Duty 1/10 @1KHz) mA SYG:25 mA SYG:60 Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol IV Luminous Intensity Typ. Max. Unit UYO 36 90 ----- mcd SYG 22 54 ----- mcd ----- 130 ----- deg IF=20mA UYO ----- 611 ----- nm IF=20mA SYG ----- 575 ----- UYO ----- 605 ----- nm SYG ----- 573 ----- IF=20mA UYO ----- 20 ----- nm SYG ----- 20 ----- IF=20mA UYO 1.7 2.0 2.4 SYG 1.7 2.0 2.4 V IF=20mA ----- ----- 10 μA VR=5V 2θ1/2 Viewing Angle Peak Wavelength Min. λp Dominant Wavelength λd Spectrum Radiation Bandwidth △λ Forward Voltage VF Reverse Current IR Condition IF=20mA Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen EVERLIGHT ELECTRONICS CO.,LTD 67-22UYOSYGC/S530-A3/E2/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 o10 Device No. DSE-672-087 prepared date:22-Mar-2006 Prepared by: Rita Shen