Formosa MS Transient Voltage Suppressor 1.5KE SERIES List 1 List................................................................................................. 58 0 0 3 0 2 Package outline............................................................................... 68 31 1 2 Features.......................................................................................... r e t in K 2 Mechanical data............................................................................... S M F 圳 2 Maximum ratings .............................................................................. 深 Electrical characteristics................................................................... 3 Rating and characteristic curves........................................................ 4 Pinning information........................................................................... 5 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Transient Voltage Suppressor 1.5KE SERIES 1500W Axial Lead Transient Voltage Suppressors - 6.8V-440V Package outline Features DO-201AE • Axial lead type devices for through hole design. • 1500W peak pulse power capability with a 10/1000us • • • • • • • waveform, repetition rate (duty cycle): 0.05%. Excellent clamping capability. Low incremental surge resistance. Fast response time from 0V to VBR, typically less than 1pS for uni-directional & 5 nS for bi-directional types. Ultra high-speed switching. Glass passivated chip junction. Lead-free parts meet environmental standards of MIL-STD-19500 /228 Suffix "-H" indicates Halogen free parts, ex. 1.5ΚΕ6.8Α-H F 圳 MS 3 3 r1 e t n i K 1 0 68 5 00 1.0(25.4) MIN. .220(5.6) .197(5.0) DIA. .375(9.5) .285(7.2) 深 Mechanical data 8 1.0(25.4) MIN. .042(1.07) .037(0.94) DIA. • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-201AE • Lead : Axial leads, solderable per MIL-STD-202, Dimensions in inches and (millimeters) Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 1.20 gram Maximum ratings (AT T A=25 oC unless otherwise noted) PARAMETER Symbol CONDITIONS Peak power dissipation with a 10/1000us waveform, note 1& fig.1 P PPM Peak pulse current with a 10/1000us waveform, note 1& fig.1 I PPM O 1.5KE series UNIT 1500 W See Table 1 A Steady state power dissipation at T L=75 C, lead length 0.375"(9.5mm) P M(AV) 6.5 W Peak forward surge current 8.3ms single half sine-wave superimposed on rated load(JEDEC Mthod), note 2 I FSM 200 A Maximum instantaneours forward voltage at 100A for Uni-Directional types only, note 3 VF 3.5/5.0 TJ -55~+150 O C T STG -65~+175 O C Operating temperature Storage temperature V O Note 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25 C per Fig. 2 2. Measured on 8.3 mS single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum 3. V F=3.5V max. for devices of V BR < 200V, and V F =5.0V max. for devices of V BR >201V http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6 Electrical characteristics (at T =25 C unless otherwise noted) Table 1 o A Absolute Maximum Rating(T A = 25 OC) Electricity Characteristics(T A = 25 OC) Part No. V RWM V BR Min V BR Max Volts Volts 5.80 IT I FSM Volts mA (A)@8.3ms 6.45 7.14 10 200 Max. V C@I PPM Max. I R@V RWM 1.5KE6.8(C)A Volts I PPM(A) 10.8 139.0 1000 1.5KE7.5(C)A 6.40 7.13 7.88 10 200 11.3 132.0 500 1.5KE8.2(C)A 7.02 7.79 8.61 10 200 12.1 124.0 200 1.5KE9.1(C)A 7.78 8.65 9.55 1.0 200 13.4 112.0 1.5KE10(C)A 8.55 9.50 10.5 1.0 200 14.5 103.0 1.5KE11(C)A 9.40 10.5 11.6 1.0 200 15.6 200 18.2 82.0 5 21.2 71.0 5 200 22.5 67.0 5 11.4 12.6 1.0 1.5KE13(C)A 11.1 12.4 13.7 1.0 200 200 14.3 15.8 1.0 1.5KE16(C)A 13.6 15.2 16.8 1.0 1.5KE18(C)A 15.3 17.1 18.9 1.5KE20(C)A 17.1 19.0 21.0 23.1 F 圳 1.0 MS Kin 1.0 5 5 10.2 12.8 68 10 90.0 1.5KE12(C)A 1.5KE15(C)A 00 96.0 03 50 58 ter 16.7 1 13 200 25.5 59.5 5 200 27.7 54.0 5 1.0 200 30.6 49.0 5 25.2 1.0 200 33.2 45.0 5 28.4 1.0 200 37.5 40.0 5 31.5 1.0 200 41.4 36.0 5 31.4 34.7 1.0 200 45.7 33.0 5 34.2 37.8 1.0 200 49.9 30.0 5 37.1 41.0 1.0 200 53.9 28.0 5 59.3 25.3 5 1.5KE22(C)A 18.8 20.9 1.5KE24(C)A 20.5 22.8 1.5KE27(C)A 23.1 25.7 1.5KE30(C)A 25.6 28.5 1.5KE33(C)A 28.2 1.5KE36(C)A 30.8 1.5KE39(C)A 33.3 深 1.5KE43(C)A 36.8 40.9 45.2 1.0 200 1.5KE47(C)A 40.2 44.7 49.4 1.0 200 64.8 23.2 5 1.5KE51(C)A 43.6 48.5 53.6 1.0 200 70.1 21.4 5 1.5KE56(C)A 47.8 53.2 58.8 1.0 200 77.0 19.5 5 1.5KE62(C)A 53.0 58.9 65.1 1.0 200 85.0 17.7 5 1.5KE68(C)A 58.1 61.6 71.4 1.0 200 92.0 16.3 5 1.5KE75(C)A 64.1 71.3 78.8 1.0 200 103.0 14.6 5 1.5KE82(C)A 70.1 77.9 86.1 1.0 200 113.0 13.3 5 1.5KE91(C)A 77.8 86.5 95.5 1.0 200 125.0 12.0 5 1.5KE100(C)A 85.5 95.0 105.0 1.0 200 137.0 11.0 5 1.5KE110(C)A 94.0 105.0 116.0 1.0 200 152.0 9.9 5 1.5KE120(C)A 102.0 114.0 126.0 1.0 200 165.0 9.1 5 1.5KE130(C)A 111.0 124.0 137.0 1.0 200 179.0 8.4 5 207.0 7.2 5 1.5KE150(C)A 128.0 143.0 158.0 1.0 200 1.5KE160(C)A 136.0 152.0 168.0 1.0 200 219.0 6.8 5 234.0 6.4 5 246.0 6.1 5 1.5KE170(C)A 145.0 162.0 179.0 1.0 200 1.5KE180(C)A 154.0 171.0 189.0 1.0 200 1.5KE200(C)A 171.0 190.0 210.0 1.0 200 274.0 5.5 5 1.5KE220(C)A 185.0 209.0 231.0 1.0 200 328.0 4.6 5 1.5KE250(C)A 214.0 237.0 263.0 1.0 200 344.0 4.4 5 414.0 3.6 5 482.0 3.1 5 1.5KE300(C)A 256.0 285.0 315.0 1.0 200 1.5KE350(C)A 300.0 332.0 368.0 1.0 200 1.5KE400(C)A 342.0 380.0 420.0 1.0 200 548.0 2.7 5 1.5KE440(C)A 376.0 418.0 462.0 1.0 200 600.0 2.5 5 Note 1. V BR measured after I T applied for 300ìS, I T=square wave pulse or equivalent 2. Surge current waveform per Fig. 3 and derated per Fig. 2 3. For bi-directional types having V RWM of 10 volts and less, the I R limit is doubled 4. Suffix ‘C’ denotes bi-directional devices. Suffix ‘A’ denotes 5% tolerance devices, no suffix denotes 10% tolerance devices. 5. All terms and symbols are consistent with ANS/IEEE C62.35 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6 Rating and characteristic curves (1.5KE SERIES) PEAK PULSE POWER, P PPM (KW) 100 10 1.0 0.1 0.1u 1.0u S M 10u 100u 1.0m 10m F 圳 PULSE WIDTH, (sec) 深 FIG.2 - PULSE DERATING CURVE PEAK PULSE POWER OR CURRENT DERATING IN PERCENTAGE, % FIG.1 - PEALK PULSE POWER RATING CURVE 100 75 3 50 3 r1 e t n i K 0 0 50 td 0 1.0 2.0 3.0 4.0 PEAK FORWARD SURGE CURRENT, I FSM (A) 50 75 100 125 150 175 200 LEAD TEMPERATURE, T L (°C) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 125 150 175 200 Bi-directional VR=0V Uni-directional VR=0V 1000 Uni-directional @ VRWM 100 Bi-directional @ VRWM 10 1 1.0 Tj=25°C f=1.0MHz Vsig=50mVp-p 10.0 100.0 1000.0 BREAKDOWN VOLTAGE, V BR (V) L = 0.375” (9.5mm) Lead Lengths 25 100 10000 FIG.6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.5 - STEADY STATE POWER DERATING CURVE 0 75 100000 TIME, T (ms) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 50 AMBIENT TEMPERATURE, T A (°C) JUNCTION CAPACITANCE, C J (pF) peak value I PPM 10/1000 us waveform STEADY STATE POWER DISSIPATION (W) PEAK PULSE CURRENT, I PPM (%) pulse width (td) is defined as the point where the peak current decays to 50% half value I PPM/2 0 25 FIG.4 - TYPICAL JUNCTION CAPACITANCE 150 100 8 pulse width (td) is defined as the point where the peak current decays to 50% 25 FIG.3 - PULSE WAVEFORM tr=10us 1 0 68 5 00 Page 4 200 100 50 20 1 10 100 NUMBER OF CYCLES AT 60HZ Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Transient Voltage Suppressor 1.5KE SERIES Pinning information Pin Simplified outline Uni-Directional Pin1 cathode Pin2 anode Symbol 1 Bi-Directional 2 3 r1 1 3 0 68 5 00 1 8 2 e t n i K S M F 圳 Suggested thermal profiles 深for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 0 0 Preheat Max gradient 2ºC/s 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6 Formosa MS Transient Voltage Suppressor 1.5KE SERIES High reliability test capabilities Item Test 1. Solder Resistance Conditions Reference o at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" 3 80 5 00 8 MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. 3. Pull Test 1.5kg in axial lead direction for 10 sec. MIL-STD-750D METHOD-2036 4. Bend Lead 1.5kg weight applied to each lead bending arc 90 o±5 o for 3 times. K S M MIL-STD-750D METHOD-2036 5. High Temperature Reverse Bias V RWM=80% rate at T J=150 oC for 168 hrs. MIL-STD-750D METHOD-1038 8. Pressure Cooker 15P SIG at T A=121 oC for 4 hrs. JESD22-A102 7. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. MIL-STD-750D METHOD-1051 0 oC for 5 min. rise to 100 oC for 5 min. total 10 cycles. MIL-STD-750D METHOD-1056 9. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 10. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 8. Thermal Shock http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 r e t in F 圳 1 13 6 深 Page 6 MIL-STD-202F METHOD-208 Document ID Issued Date Revised Date DS-222806 2008/02/10 2010/03/10 Revision B Page. 6