Formosa MS P4KE SERIES

Transient Voltage Suppressor
Formosa MS
P4KE SERIES
List
List................................................................................................. 1
Package outline............................................................................... 2
Features.......................................................................................... 2
Mechanical data............................................................................... 2
Maximum ratings .............................................................................. 2~3
Rating and characteristic curves........................................................ 4
Pinning information........................................................................... 5
Taping & bulk specifications for AXIAL devices.................................... 5
Suggested thermal profiles for soldering processes............................. 6
High reliability test capabilities........................................................... 7
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 1
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7
Transient Voltage Suppressor
Formosa MS
P4KE SERIES
400W Axial Leaded Transient Voltage
Suppressors - 6.8V-440V
Package outline
Features
DO-41
• Axial lead type devices for through hole design.
• 400W peak pulse power capability with a 10/1000us
waveform, repetition rate (duty cycle): 0.01% .
• Excellent clamping capability.
• Low incremental surge resistance.
• Fast response time from 0V to VBR, typically less than
1.0(25.4)
MIN.
.107(2.7)
1 pS for uni-directional & 5 nS for bi-directional types.
• Ultra high-speed switching.
• Glass passivated chip junction .
• Lead-free parts meet environmental standards of
MIL-STD-19500 /228
• Suffix "-H" indicates Halogen free parts, ex. P4ΚΕ6.8Α-H
.080(2.0)
DIA.
.205(5.2)
.166(4.2)
Mechanical data
1.0(25.4)
MIN.
.034(.9)
.028(.7)
DIA.
• Epoxy : UL94-V0 rated flame retardant
• Case : Molded plastic, DO-41
• Lead : Axial leads, solderable per MIL-STD-202,
Dimensions in inches and (millimeters)
Method 208 guaranteed
• Polarity: Color band denotes cathode end
• Mounting Position : Any
• Weight : Approximated 0.33 gram
Maximum ratings (AT
o
T A=25 C unless otherwise noted)
PARAMETER
CONDITIONS
Symbol
MIN.
TYP.
MAX.
UNIT
400
W
Peak power dissipation
with a 10/1000us waveform, Note 1 & Fig. 1
P PPM
Peak pulse current
with a 10/1000us waveform
I PPM
Steady state power dissipation
at T L=75°C lead length 0 . 375” (9 . 5 mm)
P M(AV)
1.0
W
Peak forward surge current
8.3ms single half sine-wave superimposed
on rated load (jedec method), note 2
for uni-directional types only,at 25A, see note 3
I FSM
40
A
VF
3.5/5.0
V
Maximum instantaneours
forward voltage
Operating temperature range
TJ
Storage temperature range
T STG
A
See table 1
-55
-55
+150
O
C
+150
O
C
Revision
Page.
B
7
O
Note 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25 C per Fig. 2
2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum
3. V F<3.5V max. for devices of V BR <200V, and V F<5.0V max. for devices of V BR>201V
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 2
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Electrical characteristics (at T =25 C unless otherwise noted)
Table 1
o
A
Reverse
Stand-off
Voltage
Breakdown Voltage @I T
Test
Current
Maximum Clamping
Voltage @I PP
Maximum
Reverse
Leakage
Current
IT
V C@I PP
I R@V RWM
Part No.
V RWM
V BR Min
V BR Max
Volts
Volts
Volts
mA
Volts
I PP(A)
I R(uA)
P4KE6.8(C)A
5.80
6.45
7.14
10
10.5
40.0
1000
P4KE7.5(C)A
6.40
7.13
7.88
10
11.3
37.0
500
P4KE8.2(C)A
7.02
7.79
8.61
10
12.1
35.0
200
P4KE9.1(C)A
7.78
8.65
9.55
1.0
13.4
31.0
50
P4KE10(C)A
8.55
9.50
10.5
1.0
14.5
29.0
10
P4KE11(C)A
9.40
10.5
11.6
1.0
15.6
27.0
5
5
P4KE12(C)A
10.2
11.4
12.6
1.0
16.7
25.0
P4KE13(C)A
11.1
12.4
13.7
1.0
18.2
23.0
5
P4KE15(C)A
12.8
14.3
15.8
1.0
21.2
20.0
5
P4KE16(C)A
13.6
15.2
16.8
1.0
22.5
19.0
5
P4KE18(C)A
15.3
17.1
18.9
1.0
25.5
17.0
5
P4KE20(C)A
17.1
19.0
21.0
1.0
27.7
15.0
5
P4KE22(C)A
18.8
20.9
23.1
1.0
30.6
14.0
5
P4KE24(C)A
20.5
22.8
25.2
1.0
33.2
13.0
5
P4KE27(C)A
23.1
25.7
28.4
1.0
37.5
11.2
5
P4KE30(C)A
25.6
28.5
31.5
1.0
41.4
10.0
5
P4KE33(C)A
28.2
31.4
34.7
1.0
45.7
9.0
5
P4KE36(C)A
30.8
34.2
37.8
1.0
49.9
8.4
5
P4KE39(C)A
33.3
37.1
41.0
1.0
53.9
7.8
5
P4KE43(C)A
36.8
40.9
45.2
1.0
59.3
7.1
5
P4KE47(C)A
40.2
44.7
49.4
1.0
64.8
6.5
5
P4KE51(C)A
43.6
48.5
53.6
1.0
70.1
6.0
5
P4KE56(C)A
47.8
53.2
58.8
1.0
77.0
5.5
5
P4KE62(C)A
53.0
58.9
65.1
1.0
85.0
5.0
5
P4KE68(C)A
58.1
64.6
71.4
1.0
92.0
4.6
5
P4KE75(C)A
64.1
71.3
78.8
1.0
103.0
4.1
5
P4KE82(C)A
70.1
77.9
86.1
1.0
113.0
3.7
5
P4KE91(C)A
77.8
86.5
95.5
1.0
125.0
3.4
5
P4KE100(C)A
85.5
95.0
105.0
1.0
137.0
3.1
5
P4KE110(C)A
94.0
105.0
116.0
1.0
152.0
2.8
5
P4KE120(C)A
102.0
114.0
126.0
1.0
165.0
2.5
5
P4KE130(C)A
111.0
124.0
137.0
1.0
179.0
2.3
5
P4KE150(C)A
128.0
143.0
158.0
1.0
207.0
2.0
5
P4KE160(C)A
136.0
152.0
168.0
1.0
219.0
1.9
5
P4KE170(C)A
145.0
162.0
179.0
1.0
234.0
1.8
5
P4KE180(C)A
154.0
171.0
189.0
1.0
246.0
1.7
5
P4KE200(C)A
171.0
190.0
210.0
1.0
274.0
1.53
5
P4KE220(C)A
185.0
209.0
231.0
1.0
328.0
1.22
5
P4KE250(C)A
214.0
237.0
263.0
1.0
344.0
1.16
5
P4KE300(C)A
256.0
285.0
315.0
1.0
414.0
0.97
5
P4KE350(C)A
300.0
332.0
368.0
1.0
482.0
0.83
5
P4KE400(C)A
342.0
380.0
420.0
1.0
548.0
0.73
5
P4KE440(C)A
376.0
418.0
462.0
1.0
600.0
0.67
5
Note 1. V BR measured after I T applied for 300us, I T=square wave pulse or equivalent
2. Surge current waveform per Fig. 3 and derated per Fig. 2
3. For bi-directional types having V RWM of 10 volts and less, the I R limit is doubled
4. Suffix ‘C’ denotes bi-directional devices. Suffix ‘A’ denotes 5% tolerance devices, no suffix denotes 10% tolerance devices.
5. All terms and symbols are consistent with ANS/IEEE C62.35
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 3
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7
Rating and characteristic curves (P4KE SERIES)
Fig.1 - PEALK PULSE POWER RATING CURVE
Fig.2 - PULSE DERATING CURVE
100
Peak Pulse Power or Current
Derating in Percentage, %
PEAK PULSE POWER, P PPM (KW)
100
10
1.0
0.1
0.1u
1.0u
10u
100u
1.0m
75
pulse width (td) is defined
as the point where the peak
current decays to 50%
50
25
0
10m
0
25
PULSE WIDTH, td (sec)
JUNCTION CAPACITANCE, C J (pF)
PEAK PULSE CURRENT, I PPM (%)
pulse width (td) is defined
as the point where the peak
current decays to 50%
peak value IPPM
half value I PPM/2
10/1000 us waveform
50
td
0
0
1.0
2.0
3.0
4.0
0.75
0.50
0.25
50
75
100
200
Bi-directional VR =0V
Uni-directional VR =0V
1000
PEAK FORWARD SURGE CURRENT, I FSM (A)
STEADY STATE POWER DISSIPATION (W)
1.00
25
150 175
Uni - directional
@ VRWM
100
Bi - directional
@ VRWM
10
Tj=25°C
f =1.0MHz
Vsig=50mVp- p
1
1.0
10.0
100.0
1000.0
BREAKDOWN VOLTAGE, V BR (Volts)
Fig.5 - STEADY STATE POWER DERATING CURVE
0
125
10000
TIME, t (ms)
0
100
Fig.4 - Typical Junction Capacitance
150
100
75
AMBIENT TEMPERATURE, T A (°C)
Fig.3 - Pulse Waveform
tr=10us
50
125
150 175
200
45
40
35
30
25
20
15
10
5
0
1
10
100
NUMBER OF CYCLES AT 60Hz
LEAD TEMPERATURE, T L (°C)
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Fig.6 - MAXIMUM NON-REPETITIVE
FORWARD SURGE CURRENT
Page 4
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7
Transient Voltage Suppressor
Formosa MS
P4KE SERIES
Pinning information
Pin
Simplified outline
Uni-Directional
Pin1 cathode
Pin2 anode
1
Symbol
2
1
2
Bi-Directional
Taping & bulk specifications for AXIAL devices
52.4mm
17mm DIA.
55mm Max.
A
17mm DIA.
72mm DIA.
71mm Max.
355mm
OFF Center
both sids
1.0mm
Max OFF
Alignment
1.2mm
6.3mm
REEL PACKING
DEVICE
Q'TY 1
CASE
(PCS / REEL)
TYPE
DO-41
5,000
CARTON
Q'TY 2
SPACING
SIZE
(PCS / CARTON)
"A" in FIG. A
(m/m)
COMPONENT
5 mm
360 * 340 * 370
APPROX.
CROSS
WEIGHT(kg)
20,000
10.8
AMMO PACKING
DEVICE
Q'TY 1
INNER
CARTON
Q'TY 2
APPROX.
CASE
(PCS / BOX)
BOX SIZE
SIZE
(PCS / CARTON)
CROSS
(m/m)
(m/m)
TYPE
DO-41
5,000
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
260 * 83 * 160
440 * 270 * 340
Page 5
WEIGHT(kg)
50,000
20.0
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7
Transient Voltage Suppressor
Formosa MS
P4KE SERIES
BULK PACKING
DEVICE
Q'TY 1
INNER
CARTON
Q'TY 2
APPROX.
CASE
(PCS / BOX)
BOX SIZE
SIZE
(PCS / CARTON)
CROSS
TYPE
(m/m)
DO-41
1,000
WEIGHT(kg)
(m/m)
194 * 84 * 20
465 * 220 * 260
50,000
20.6
Suggested thermal profiles for soldering processes
1.Lead free temperature profile wave-soldering
280
Peak soldering temperature not
to exceed 260ºC
260
240
220
Temperature(°C)
200
180
160
140
120
Peak
Max well
time 5 Max
100
80
Cool Down
Max gradient-4ºC/s
Suggested gradient - 2ºC/s or
less
60
40
20
Preheat
Max gradient 2ºC/s
0
0
20
40
60
80
100 120 140 160 180 200 220 240
Time(Sec)
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
Page 6
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7
Transient Voltage Suppressor
Formosa MS
P4KE SERIES
High reliability test capabilities
Item Test
Conditions
Reference
o
MIL-STD-750D
METHOD-2031
o
1. Solder Resistance
at 260±5 C for 10±2sec.
immerse body into solder 1/16"±1/32"
2. Solderability
at 245±5 C for 5 sec.
MIL-STD-202F
METHOD-208
3. Pull Test
1.0kg in axial lead direction for 10 sec.
MIL-STD-750D
METHOD-2036
4. Bend Lead
1.0kg weight applied to each lead bending
o
o
arc 90 ±5 for 3 times.
MIL-STD-750D
METHOD-2036
5. High Temperature Reverse Bias
V RWM=80% rate at T J=150 C for 168 hrs.
8. Pressure Cooker
15P SIG at T A=121 C for 4 hrs.
7. Temperature Cycling
8. Thermal Shock
9. Humidity
10. High Temperature Storage Life
http://www.formosams.com/
TEL:886-2-22696661
FAX:886-2-22696141
MIL-STD-750D
METHOD-1038
o
JESD22-A102
o
MIL-STD-750D
METHOD-1051
o
o
-55 C to +125 C dwelled for 30 min.
and transferred for 5min. total 10 cycles.
o
o
0 C for 5 min. rise to 100 C for 5 min. total 10 cycles.
MIL-STD-750D
METHOD-1056
o
at T A=85 C , RH=85% for 1000hrs.
MIL-STD-750D
METHOD-1021
o
at 175 C for 1000 hrs.
MIL-STD-750D
METHOD-1031
Page 7
Document ID
Issued Date
Revised Date
DS-222803
2008/02/10
2010/03/10
Revision
Page.
B
7