Farnell Order Code: 1641039 FOX MODEL: FXO-HC536R-25 FOX Part Number: 767-25-92 HCMOS, CERAMIC, SMD, OSCILLATOR Specifications Parameters Frequency Frequency Stability 1 Temperature Range Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Output Voltage (VOL) Mechanical / Dimensions (millimeters): 5.15 Max 25.000 MHz ±25 PPM Top View (VOH) Output Symmetry (50% Vp-p Level) Rise Time (10% ~ 90% Vp-p) (TR) Fall Time (90% ~ 10% Vp-p) (TF) Output Load (HCMOS) Startup Time (TS) Output Enable / Disable Time 2 Phase Jitter (12kHz ~ 20MHz) Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish -40°C ~ +85°C -55°C ~ +125ºC 3.3V ± 5% 35 mA Max 10% VDD Max 90% VDD Min 45% ~ 55% 3 nS Max 3 nS Max 15 pF Max 10 ms Max 100 nS Max < 1.1pS Typ. 260°C / 10 Seconds 1 Au 1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. 2 ACTIVE ACTIVE High Z NOTE: A 0.01µF bypass capacitor should be placed between VDD (Pin4) and GND (Pin 2) to minimize power supply line noise. RoHS Compliance Status: Compliant Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary 3.35 Max #1 Top of Part Is marked with Frequency #2 Pin 1 Designator (FOX Head or Dot) 1.4 Max 2.54 1.27 #1 TP* #2 #4 TP* #3 Bottom View 1.2 0.64 Recommended Solder Pad Layout 2.54 1.29 2.25 2 ENABLE/DISABLE FUNCTION Pin 1 OUTPUT (Pin 3) OPEN '1' Level VIH ≥ 70%VDD '0' Level VIL ≤ 30%VDD #3 #4 1.24 Note: XPRESSO HCMOS XOs are designed to fit on industry standard, 4 pad, layouts. Pin Connections #1) E/D #3 Output #2 GND #4 VDD *TP are test points and are NC Recommended Circuit 0.01 F E/D #1 NC GND VDD #4 NC #2 #3 OUT HCMOS LOAD (15 pF) NOTE: The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Rev: 1 Size: A Drawing Number: DWG-4548-23 Cage: 61429 Part Number: 767-25-92 Draftsperson: AR Approved: BN Date: 08/25/2008