Intel® NUC Board D53427RKE Technical Product Specification May 2013 Order Number: G97389-001 The Intel NUC Board D53427RKE may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel NUC Board D53427RKE Specification Update. Revision History Revision 001 Revision History Date ® First release of the Intel Specification NUC Board D53427RKE Technical Product May 2013 Disclaimer This product specification applies to only the standard Intel® NUC Board with BIOS identifier RKPPT10H.86A. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR. All Intel® NUC Boards are evaluated as Information Technology Equipment (I.T.E.) for use in personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar locations. The suitability of this product for other PC or embedded non-PC applications or other environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported without further evaluation by Intel. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. Intel NUC Boards may contain design defects or errors known as errata, which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your product order. Intel and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries. * Other names and brands may be claimed as the property of others. Copyright 2013, Intel Corporation. All rights reserved. Board Identification Information Basic Intel® NUC Board D53427RKE Identification Information AA Revision BIOS Revision Notes G87790-400 RKPPT10H.86A.0017 1,2 Notes: 1. The AA number is found on a small label on the component side of the board. 2. The Intel® QS77 PCH and Intel® Core™ i5-3427U processor used on this AA revision consists of the following components: Device Stepping S-Spec Numbers Intel Core i5-3427U L1 SR0N7 Intel BD82QS77 C1 5A002U Errata Current characterized errata, if any, are documented in a separate Specification Update. See www.intel.com/nextunitofcomputing for the latest documentation. iii Intel NUC D53427RKE Technical Product Specification iv Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for Intel® NUC Board D53427RKE. Intended Audience The TPS is intended to provide detailed, technical information about Intel NUC Board D53427RKE and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. It is specifically not intended for general audiences. What This Document Contains Chapter Description 1 A description of the hardware used on Intel NUC Board D53427RKE 2 A map of the resources of the Intel NUC Board 3 The features supported by the BIOS Setup program 4 A description of the BIOS error messages, beep codes, and POST codes 5 Regulatory compliance and battery disposal information Typographical Conventions This section contains information about the conventions used in this specification. Not all of these symbols and abbreviations appear in all specifications of this type. Notes, Cautions, and Warnings NOTE Notes call attention to important information. CAUTION Cautions are included to help you avoid damaging hardware or losing data. v Intel NUC D53427RKE Technical Product Specification Other Common Notation vi # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh An address or data value ending with a lowercase h indicates a hexadecimal value. x.x V Volts. Voltages are DC unless otherwise specified. * This symbol is used to indicate third-party brands and names that are the property of their respective owners. Contents Revision History Disclaimer ................................................................................................ ii Board Identification Information .................................................................. iii Errata ......................................................................................................iii Preface Intended Audience..................................................................................... v What This Document Contains..................................................................... v Typographical Conventions ......................................................................... v 1 Product Description 1.1 Overview ......................................................................................... 11 1.1.1 Feature Summary ................................................................. 11 1.1.2 Board Layout (Top) ............................................................... 13 1.1.3 Board Layout (Bottom) .......................................................... 15 1.1.4 Block Diagram ...................................................................... 17 1.2 Online Support ................................................................................. 18 1.3 Processor ........................................................................................ 18 1.4 System Memory ............................................................................... 19 1.4.1 Memory Configurations .......................................................... 20 1.5 Intel® QS77 Express Chipset .............................................................. 22 1.5.1 Direct Media Interface (DMI) .................................................. 22 1.5.2 Display Interfaces ................................................................. 22 1.6 Graphics Subsystem ......................................................................... 23 1.6.1 Integrated Graphics ............................................................... 23 1.6.2 USB ..................................................................................... 25 1.6.3 AHCI Mode ........................................................................... 25 1.7 Real-Time Clock Subsystem ............................................................... 26 1.8 LAN Subsystem ................................................................................ 26 1.8.1 Intel® 82579LM Gigabit Ethernet Controller .............................. 27 1.8.2 LAN Subsystem Software ....................................................... 27 1.8.3 RJ-45 LAN Connector with Integrated LEDs .............................. 28 1.9 Hardware Management Subsystem ..................................................... 29 1.9.1 Hardware Monitoring ............................................................. 29 1.9.2 Fan Monitoring ...................................................................... 29 1.9.3 Thermal Solution ................................................................... 30 1.10 Power Management .......................................................................... 31 1.10.1 ACPI .................................................................................... 31 1.10.2 Hardware Support ................................................................. 33 1.11 Intel® Security and Manageability Technologies .................................... 36 1.11.1 Intel® vPro™ Technology ........................................................ 36 1.11.2 Intel® Small Business Technology ............................................ 39 vii Intel NUC D53427RKE Technical Product Specification 2 Technical Reference 2.1 Memory Resources ........................................................................... 41 2.1.1 Addressable Memory ............................................................. 41 2.2 Connectors and Headers .................................................................... 42 2.2.1 Back Panel Connectors ........................................................... 43 2.2.2 Connectors and Headers (Bottom) ........................................... 44 2.3 BIOS Setup Configuration Jumper ....................................................... 52 2.4 Intel® Management Engine BIOS Extension (Intel® MEBX) Reset Header . 53 2.5 Mechanical Considerations ................................................................. 55 2.5.1 Form Factor .......................................................................... 55 2.6 Electrical Considerations .................................................................... 56 2.6.1 Power Supply Considerations .................................................. 56 2.6.2 Fan Header Current Capability ................................................ 57 2.7 Thermal Considerations ..................................................................... 57 2.8 Reliability......................................................................................... 60 2.9 Environmental .................................................................................. 60 3 Overview of BIOS Features 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Introduction ..................................................................................... 61 BIOS Flash Memory Organization ........................................................ 62 System Management BIOS (SMBIOS) ................................................. 62 Legacy USB Support ......................................................................... 62 BIOS Updates .................................................................................. 63 3.5.1 Language Support ................................................................. 63 3.5.2 Custom Splash Screen ........................................................... 64 BIOS Recovery ................................................................................. 64 Boot Options .................................................................................... 65 3.7.1 Network Boot........................................................................ 65 3.7.2 Booting Without Attached Devices ........................................... 65 3.7.3 Changing the Default Boot Device During POST ......................... 65 Hard Disk Drive Password Security Feature .......................................... 66 BIOS Security Features ..................................................................... 67 4 Error Messages and Blink Codes 4.1 Front-panel Power LED Blink Codes ..................................................... 69 4.2 BIOS Error Messages ........................................................................ 69 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance ...................................................................... 71 5.1.1 Safety Standards................................................................... 71 5.1.2 European Union Declaration of Conformity Statement ................ 72 5.1.3 Product Ecology Statements ................................................... 73 5.1.4 EMC Regulations ................................................................... 74 5.1.5 ENERGY STAR* 5.2, e-Standby, and ErP Compliance ................. 76 5.1.6 Regulatory Compliance Marks (Board Level) ............................. 77 5.2 Battery Disposal Information .............................................................. 78 viii Contents Figures 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Major Board Components (Top) .......................................................... 13 Major Board Components (Bottom) ..................................................... 15 Block Diagram .................................................................................. 17 Memory Channel and SO-DIMM Configuration ...................................... 21 LAN Connector LED Locations ............................................................. 28 Thermal Solution and Fan Header ....................................................... 30 Location of the Standby Power LED ..................................................... 35 Back Panel Connectors ...................................................................... 43 Connectors and Headers (Bottom) ...................................................... 44 Connection Diagram for Front Panel Header ......................................... 50 Connection Diagram for Front Panel USB 2.0 Dual-Port Header............... 51 Location of the BIOS Configuration Setup Jumper ................................. 52 Intel MEBX Reset Header ................................................................... 54 Board Dimensions ............................................................................. 55 Localized High Temperature Zones ..................................................... 58 Intel Visual BIOS Home Screen .......................................................... 61 Tables 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. Feature Summary ............................................................................. 11 Components Shown in Figure 1 .......................................................... 14 Components Shown in Figure 2 .......................................................... 16 Supported Memory Configurations ...................................................... 19 Triple Display Configuration Resolutions .............................................. 24 LAN Connector LED States ................................................................. 28 Effects of Pressing the Power Switch ................................................... 31 Power States and Targeted System Power ........................................... 32 Wake-up Devices and Events ............................................................. 33 Connectors and Headers Shown in Figure 10 ........................................ 45 PCI Express Full-/Half-Mini Card Connector .......................................... 46 Dual-Port Front Panel USB 2.0 Header ................................................. 48 19 V Internal Power Supply Connector ................................................ 49 Front Panel Header ........................................................................... 49 States for a One-Color Power LED....................................................... 50 BIOS Setup Configuration Jumper Settings .......................................... 53 Intel MEBX Reset Header Signals ........................................................ 54 Fan Header Current Capability ............................................................ 57 Thermal Considerations for Components .............................................. 59 Tcontrol Values for Components ......................................................... 59 Environmental Specifications .............................................................. 60 Acceptable Drives/Media Types for BIOS Recovery................................ 64 Boot Device Menu Options ................................................................. 65 Master Key and User Hard Drive Password Functions ............................ 66 Supervisor and User Password Functions ............................................. 67 Front-panel Power LED Blink Codes ..................................................... 69 ix Intel NUC D53427RKE Technical Product Specification 27. 28. 29. 30. x BIOS Error Messages ........................................................................ 69 Safety Standards .............................................................................. 71 EMC Regulations ............................................................................... 74 Regulatory Compliance Marks ............................................................ 77 1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of the board. Table 1. Feature Summary Form Factor 4.0 inches by 4.0 inches (101.60 millimeters by 101.60 millimeters) Processor • Soldered-down Intel® Core™ i5-3427U processor with up to 17 W TDP ― Integrated graphics ― Integrated memory controller Memory • Two 204-pin DDR3 SDRAM Small Outline Dual Inline Memory Module (SO-DIMM) sockets • Support for DDR3 1600 MHz and DDR3 1333 MHz SO-DIMMs • Support for 1 Gb, 2 Gb, and 4 Gb memory technology • Support for up to 16 GB of system memory with two SO-DIMMs using 4 Gb memory technology • Support for non-ECC memory • Support for 1.35 V low voltage JEDEC memory Chipset Intel® QS77 Express Chipset consisting of the Intel® QS77 Express Platform Controller Hub (PCH) Graphics • Integrated graphics support for processors with Intel® Graphics Technology: ― One High Definition Multimedia Interface* (HDMI*) back panel connector ― Two mini DisplayPort* back panel connectors Audio Intel® High Definition Audio via the HDMI v1.4a and DisplayPort 1.1a interfaces through the PCH Peripheral Interfaces • USB 2.0 ports: ― Two front panel ports are implemented through one dual-port internal header ― Two ports are implemented with vertical back panel connectors ― One port is reserved for the PCI Express* Half-Mini Card ― One port is reserved for the PCI Express Full-Mini Card • One front panel USB 3.0 port is implemented through an external connector (blue) Expansion Capabilities • One PCI Express Half-Mini Card connector Intel® Visual BIOS • Intel® Visual BIOS resident in the Serial Peripheral Interface (SPI) Flash device • One PCI Express Full-Mini Card connector • Support for Advanced Configuration and Power Interface (ACPI), Plug and Play, and System Management BIOS (SMBIOS) continued 11 Intel NUC D53427RKE Technical Product Specification Table 1. Feature Summary (continued) LAN Support Gigabit (10/100/1000 Mb/s) LAN subsystem using the Intel® 82579LM Gigabit Ethernet Controller Hardware Monitor Subsystem Hardware monitoring subsystem, based on a Nuvoton NCT5577D embedded controller, including: • Voltage sense to detect out of range power supply voltages • Thermal sense to detect out of range thermal values • One processor fan header • Fan sense input used to monitor fan activity • Simple fan speed control ® Intel Security and Manageability Technologies • Intel® Active Management Technology (Intel® AMT) 8.0 • Intel® Virtualization (Intel® VT) • Intel® Virtualization for Directed I/O (Intel® VT-d) • Intel® Trusted Execution Technology (Intel® TXT) • Intel® Identity Protection Technology (Intel® IPT) • Intel® Anti-Theft Technology (Intel® AT) • Trusted Platform Module (TPM) • Intel® Small Business Technology (Intel® SBT) 12 Product Description 1.1.2 Board Layout (Top) Figure 1 shows the location of the major components on the top-side of Intel NUC Board D53427RKE. Figure 1. Major Board Components (Top) 13 Intel NUC D53427RKE Technical Product Specification Table 2 lists the components identified in Figure 1. Table 2. Components Shown in Figure 1 14 Item from Figure 1 Description A Standby power LED B Battery C Processor fan header D Onboard power button E Power LED F Hard Disk Drive LED G Thermal solution Product Description 1.1.3 Board Layout (Bottom) Figure 2 shows the location of the major components on the bottom-side of Intel NUC Board D53427RKE. Figure 2. Major Board Components (Bottom) 15 Intel NUC D53427RKE Technical Product Specification Table 3. Components Shown in Figure 2 16 Item from Figure 2 Description A Back panel connectors B PCI Express Full-Mini Card connector C PCI Express Half-Mini Card connector D Front panel dual-port USB 2.0 header E Front panel USB 3.0 port F BIOS setup configuration jumper G Front panel header H Intel® Management Engine BIOS Extension (Intel® MEBX) Reset header I DDR3 SO-DIMM 2 socket J DDR3 SO-DIMM 1 socket K Internal DC power connector Product Description 1.1.4 Block Diagram Figure 3 is a block diagram of the major functional areas of the board. Figure 3. Block Diagram 17 Intel NUC D53427RKE Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel NUC Board D53427RKE http://www.intel.com/products/motherboard/index.htm NUC Board Support http://www.intel.com/p/en_US/support?iid=hdr+support Available configurations for Intel NUC Board D53427RKE http://ark.intel.com Chipset information https://wwwssl.intel.com/content/www/us/en/chipsets/performancechipsets/chipsets.html BIOS and driver updates http://downloadcenter.intel.com Tested memory http://www.intel.com/support/motherboards/desktop/sb/CS025414.htm Integration information http://www.intel.com/support/go/buildit Processor The board has a soldered-down Intel Core i5-3427 processor with Integrated Graphics Technology and integrated memory controller. NOTE This board has specific requirements for providing power to the processor. Refer to Section 2.5.1 on page 56 for information on power supply requirements for this board. 18 Product Description 1.4 System Memory The board has two 204-pin SO-DIMM sockets and supports the following memory features: • • • • • • • • • 1.5 V DDR3 SDRAM SO-DIMMs with gold plated contacts Support for 1.35 V Low Voltage DDR3 (new JEDEC specification) Two independent memory channels with interleaved mode support Unbuffered, single-sided or double-sided SO-DIMMs 16 GB maximum total system memory (with 4 Gb memory technology). Refer to Section 2.1.1 on page 41 for information on the total amount of addressable memory. Minimum recommended total system memory: 1024 MB Non-ECC SO-DIMMs Serial Presence Detect DDR3 1600 MHz and DDR3 1333 MHz SDRAM SO-DIMMs NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the SO-DIMMs may not function under the determined frequency. Table 4 lists the supported SO-DIMM configurations. Table 4. Supported Memory Configurations SO-DIMM Capacity 1024 MB 2048 MB 2048 MB 4096 MB 4096 MB 8192 MB Note: Configuration (Note) SS DS SS DS SS DS SDRAM Density 1 Gbit 1 Gbit 2 Gbit 2 Gbit 4 Gbit 4 Gbit SDRAM Organization Front-side/Back-side 128 M x8/empty 128 M x8/128 M x8 256 M x8/empty 256 M x8/256 M x8 512 M x8/empty 512 M x8/512 M x8 Number of SDRAM Devices 8 16 8 16 8 16 “DS” refers to double-sided memory modules (containing two rows of SDRAM) and “SS” refers to single-sided memory modules (containing one row of SDRAM). For information about… Refer to: Tested Memory http://support.intel.com/support/motherboards/desktop/sb /CS-025414.htm 19 Intel NUC D53427RKE Technical Product Specification 1.4.1 Memory Configurations The processor supports the following types of memory organization: • • 20 Dual channel (Interleaved) mode. This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both SO-DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal. If different speed SO-DIMMs are used between channels, the slowest memory timing will be used. Single channel (Asymmetric) mode. This mode is equivalent to single channel bandwidth operation for real world applications. This mode is used when only a single SO-DIMM is installed or the memory capacities are unequal. Technology and device width can vary from one channel to the other. If different speed SO-DIMMs are used between channels, the slowest memory timing will be used. For information about… Refer to: Memory Configuration Examples http://www.intel.com/support/motherboards/desktop/sb/cs011965.htm Product Description Figure 4 illustrates the memory channel and SO-DIMM configuration. Figure 4. Memory Channel and SO-DIMM Configuration 21 Intel NUC D53427RKE Technical Product Specification Intel® QS77 Express Chipset 1.5 Intel QS77 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and the USB, SATA, LPC, LAN, and PCI Express interfaces. The Intel QS77 Express Chipset is a centralized controller for the board’s I/O paths. For information about Refer to The Intel QS77 chipset http://www.intel.com/products/desktop/chipsets/index.htm Resources used by the chipset Chapter 2 1.5.1 Direct Media Interface (DMI) Direct Media Interface (DMI) is the chip-to-chip connection between the processor and PCH. This high-speed interface integrates advanced priority-based servicing allowing for concurrent traffic and true isochronous transfer capabilities. 1.5.2 Display Interfaces Display is divided between the processor and the PCH. The processor houses the memory interface, display planes, and pipes while the PCH has transcoder and display interface or ports. The PCH receives the display data over Intel® Flexible Display Interface (Intel® FDI) and transcodes the data as per the display technology protocol and sends the data through the display interface. 1.5.2.1 Intel® Flexible Display Interconnect (Intel® FDI) Intel FDI connects the display engine in the processor with the display interfaces on the PCH. The display data from the frame buffer is processed in the display engine of the processor and sent to the PCH over the Intel FDI where it is transcoded as per the display protocol and driven to the display monitor. 1.5.2.2 High-bandwidth Digital Content Protection (HDCP) HDCP is the technology for protecting high definition content against unauthorized copy or unreceptive between a source (computer, digital set top boxes, etc.) and the sink (panels, monitor, and TVs). The PCH supports HDCP 1.4 for content protection over wired displays (HDMI). 22 Product Description 1.6 Graphics Subsystem The board supports graphics through Intel Graphics Technology. 1.6.1 Integrated Graphics The board supports integrated graphics through Intel FDI. Intel® High Definition (Intel® HD) Graphics 1.6.1.1 The Intel HD graphics controller features the following: • 3D Features DirectX* 10.1 and OpenGL* 3.0 compliant DirectX 11.0 CS4.0 only • Shader Model 4.0 Video High-Definition content at up to 1080p resolution Hardware accelerated MPEG-2, VC-1/WMV and H.264/AVC Hi-Definition video formats Intel HD Technology with Advanced Hardware Video Transcoding Blu-ray* S3D via HDMI 1.4a Dynamic Video Memory Technology (DVMT) 5.0 support Support of up to 1.7 GB Video Memory with 4 GB and above system memory configuration 1.6.1.2 Video Memory Allocation ® Intel Dynamic Video Memory Technology (DVMT) is a method for dynamically allocating system memory for use as graphics memory to balance 2D/3D graphics and system performance. If your computer is configured to use DVMT, graphics memory is allocated based on system requirements and application demands (up to the configured maximum amount). When memory is no longer needed by an application, the dynamically allocated portion of memory is returned to the operating system for other uses. 1.6.1.3 High Definition Multimedia Interface* (HDMI*) The HDMI port supports standard, enhanced, or high definition video, plus multichannel digital audio on a single cable. Each port is compatible with all ATSC and DVB HDTV standards and supports eight full range channels at 24-bit/96 kHz audio of lossless audio formats such as Dolby* TrueHD or DTS* HD Master Audio. The maximum supported resolution is 1920 x 1200 (WUXGA). The HDMI port is compliant with the HDMI 1.4a specification. 23 Intel NUC D53427RKE Technical Product Specification 1.6.1.3.1 Integrated Audio Provided by the HDMI Interface The following audio technologies are supported by the HDMI 1.4a interface directly from the PCH: • • • • • AC-3 - Dolby* Digital Dolby Digital Plus DTS-HD* Dolby TrueHD, DTS-HD Master Audio*, (Lossless Blu-ray Disc* Audio Format LPCM, 192 kHz/24-bit, 8 Channel 1.6.1.4 DisplayPort* DisplayPort is a digital communication interface that utilizes differential signaling to achieve a high bandwidth bus interface designed to support connections between PCs and monitors, projectors, and TV displays. DisplayPort is suitable for display connections between consumer electronics devices such as high definition optical disc players, set top boxes, and TV displays. The DisplayPort interface supports the 1.1a specification. There are two mini DisplayPort connectors on the back panel. DisplayPort’s maximum supported display resolution is 2560 x 1600 @ 60 Hz refresh rate with a 16:10 aspect ratio (WQXGA). For information about Refer to DisplayPort technology http://www.displayport.org 1.6.1.4.1 Integrated Audio Provided by the DisplayPort Interfaces The mini DisplayPort interfaces support LPCM 96 KHz/24-bit, 2-channel audio directly through the PCH. NOTE The PCH only supports one audio stream at a time over DisplayPort. Dual audio signals are not supported. 1.6.1.4.2 Triple Display Configurations For triple display configurations, at least two displays must be connected to native DisplayPort monitors. Use of DisplayPort converters will not allow triple display outputs. Table 5. Triple Display Configuration Resolutions 24 Active Display Active Display Active Display DisplayPort 2560 x 1600 at 60 Hz DisplayPort 1920 x 1200 at 60 Hz HDMI* 1080P at 60 Hz Product Description 1.6.1.5 High-bandwidth Digital Content Protection (HDCP) HDCP is the technology for protecting high definition content against unauthorized copy or interception between a source (computer, digital set top boxes, etc.) and the sink (panels, monitor, and TVs). The PCH supports HDCP 1.4 for content protection over wired displays (HDMI and DisplayPort). 1.6.2 USB The board supports USB 2.0/3.0 ports. The port arrangement is as follows: • USB 2.0 ports: Two front panel ports are implemented through one dual-port internal header Two ports are implemented with vertical back panel connectors One port is reserved for the PCI Express Half-Mini Card • One port is reserved for the PCI Express Full-Mini Card One front panel USB 3.0 port is implemented through an external connector (blue) All USB 2.0/3.0 ports are high-speed, full-speed, and low-speed capable. NOTE Computer systems that have an unshielded cable attached to a USB port may not meet FCC Class B requirements, even if no device is attached to the cable. Use a shielded cable that meets the requirements for full-speed devices. For information about Refer to The location of the USB connectors on the back panel Figure 9, page 43 The location of the front panel USB headers Figure 2, page 15 1.6.3 AHCI Mode The board supports AHCI storage mode via the Intel QS77 Express Chipset. NOTE In order to use AHCI mode, AHCI must be enabled in the BIOS. Microsoft Windows 7 and Windows 8 include the necessary AHCI drivers without the need to install separate AHCI drivers during the operating system installation process, however, it is always good practice to update the AHCI drivers to the latest available by Intel. 25 Intel NUC D53427RKE Technical Product Specification 1.7 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied via the power supply 5 V STBY rail. NOTE If the battery and AC power fail, date and time values will be reset and the user will be notified during the POST. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be accurate. Replace the battery with an equivalent one. Figure 1 on page 13 shows the location of the battery. 1.8 LAN Subsystem The LAN subsystem consists of the following: • • • Intel 82579LM Gigabit Ethernet Controller (10/100/1000 Mb/s) Intel QS77 Express Chipset RJ-45 LAN connector with integrated status LEDs Additional features of the LAN subsystem include: • CSMA/CD protocol engine • Jumbo frame support • LAN connect interface between the PCH and the LAN controller • Power management capabilities ACPI technology support • 26 LAN wake capabilities LAN subsystem software For information about Refer to LAN software and drivers http://downloadcenter.intel.com Product Description 1.8.1 Intel® 82579LM Gigabit Ethernet Controller The Intel 82579LM Gigabit Ethernet Controller supports the following features: • • • 10/100/1000 BASE-T IEEE 802.3 compliant Energy Efficient Ethernet (EEE) IEEE802.3az support (Low Power Idle (LPI) mode) Dual interconnect between the Integrated LAN Controller and the Physical Layer (PHY): PCI Express-based interface for active state operation (S0) state • • • • 1.8.2 SMBUS for host and management traffic (Sx low power state) Compliant to IEEE 802.3x flow control support 802.1p and 802.1q TCP, IP, and UDP checksum offload (for IPv4 and IPv6) Full device driver compatibility LAN Subsystem Software LAN software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining LAN software and drivers http://downloadcenter.intel.com 27 Intel NUC D53427RKE Technical Product Specification 1.8.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 5). Item Description A Link LED (Green) B Data Rate LED (Green/Yellow) Figure 5. LAN Connector LED Locations Table 6 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 6. LAN Connector LED States LED LED Color LED State Condition Off LAN link is not established. Link Green On LAN link is established. Blinking LAN activity is occurring. Off 10 Mb/s data rate is selected. Green 100 Mb/s data rate is selected. Yellow 1000 Mb/s data rate is selected. Data Rate 28 Green/Yellow Product Description 1.9 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including thermal and voltage monitoring. For information about Refer to Wired for Management (WfM) Specification www.intel.com/design/archives/wfm/ 1.9.1 Hardware Monitoring The hardware monitoring and fan control subsystem is based on a Nuvoton NCT5577D embedded controller, which supports the following: • • • • 1.9.2 Processor and system ambient temperature monitoring Chassis fan speed monitoring Voltage monitoring of +12 V, +5 V, +3.3 V, Memory Vcc (V_SM), +Vccp, PCH Vcc SMBus interface Fan Monitoring Fan monitoring can be implemented using third-party software. 29 Intel NUC D53427RKE Technical Product Specification 1.9.3 Thermal Solution Figure 6 shows the location of the thermal solution and processor fan header. Item Description A Processor fan header B Thermal solution Figure 6. Thermal Solution and Fan Header 30 Product Description 1.10 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: Power Input Instantly Available PC technology LAN wake capabilities Wake from USB WAKE# signal wake-up support Wake from S5 +5 V Standby Power Indicator LED 1.10.1 ACPI ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. The use of ACPI with this board requires an operating system that provides full ACPI support. ACPI features include: • • • • • • Plug and Play (including bus and device enumeration) Power management control of individual devices, add-in boards (some add-in boards may require an ACPI-aware driver), video displays, and hard disk drives Methods for achieving less than 15-watt system operation in the power-on/standby sleeping state A Soft-off feature that enables the operating system to power-off the computer Support for multiple wake-up events (see Table 9 on page 33) Support for a front panel power and sleep mode switch Table 7 lists the system states based on how long the power switch is pressed, depending on how ACPI is configured with an ACPI-aware operating system. Table 7. Effects of Pressing the Power Switch If the system is in this state… …and the power switch is pressed for Off (ACPI G2/G5 – Soft off) Less than four seconds Power-on (ACPI G0 – working state) On (ACPI G0 – working state) Less than four seconds Soft-off/Standby (ACPI G1 – sleeping state) On (ACPI G0 – working state) More than six seconds Fail safe power-off (ACPI G2/G5 – Soft off) Sleep (ACPI G1 – sleeping state) Less than four seconds Wake-up (ACPI G0 – working state) Sleep (ACPI G1 – sleeping state) More than six seconds Power-off (ACPI G2/G5 – Soft off) …the system enters this state Note Note: Depending on power management settings in the operating system. 31 Intel NUC D53427RKE Technical Product Specification 1.10.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state. Table 8 lists the power states supported by the board along with the associated system power targets. See the ACPI specification for a complete description of the various system and power states. Table 8. Power States and Targeted System Power Global States Sleeping States Processor States G0 – working state S0 – working C0 – working D0 – working state. Full power > 30 W G1 – sleeping state S3 – Suspend to RAM. Context saved to RAM. No power D3 – no power except for wake-up logic. Power < 5 W (Note 2) G1 – sleeping state S4 – Suspend to disk. Context saved to disk. No power D3 – no power except for wake-up logic. Power < 5 W (Note 2) G2/S5 S5 – Soft off. Context not saved. Cold boot is required. No power D3 – no power except for wake-up logic. Power < 5 W (Note 2) G3 – mechanical off No power to the system. No power D3 – no power for wake-up logic, except when provided by battery or external source. No power to the system. Service can be performed safely. AC power is disconnected from the computer. Device States Targeted System Power (Note 1) Notes: 32 1. Total system power is dependent on the system configuration, including add-in boards and peripherals powered by the system chassis’ power supply. 2. Dependent on the standby power consumption of wake-up devices used in the system. Product Description 1.10.1.2 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9. Wake-up Devices and Events Devices/events that wake up the system… …from this sleep state Power switch S3, S4, S5 RTC alarm S3, S4, S5 LAN S3, S4, S5 USB S3 WAKE# S3, S4, S5 (Note 1) (Note 1) (Notes 1 and 3) …from this global state G1, G2, G3 G1, G2 G1, G2 (Note 3) (Note 3) G1 (Note 1) G1, G2 (Note 3) Notes: 1. S4 implies operating system support only. 2. Wake from S4 and S5 is recommended by Microsoft. 3. Wake from device/event not supported immediately upon return from AC loss. 4. Wake on LAN is only supported from sleep (S3) or hibernate (S4) in Windows 8. NOTE The use of these wake-up events from an ACPI state requires an operating system that provides full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake events. 1.10.2 Hardware Support The board provides several power management hardware features, including: • • • • • • • Wake from Power Button signal Instantly Available PC technology LAN wake capabilities Wake from USB WAKE# signal wake-up support Wake from S5 +5 V Standby Power Indicator LED NOTE The use of Wake from USB from an ACPI state requires an operating system that provides full ACPI support. 33 Intel NUC D53427RKE Technical Product Specification 1.10.2.1 Power Input When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off). The computer’s response can be set using the Last Power State feature in the BIOS Setup program’s Boot menu. For information about Refer to The location of the internal power connector Figure 2, page 15 The signal names of the internal power connector Table 13, page 49 1.10.2.2 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the power supply is off, and the front panel LED is amber if dual colored, or off if single colored.) When signaled by a wake-up device or event, the system quickly returns to its last known wake state. Table 9 on page 33 lists the devices and events that can wake the computer from the S3 state. The use of Instantly Available PC technology requires operating system support and drivers for any installed PCI Express add-in card. 1.10.2.3 LAN Wake Capabilities LAN wake capabilities enable remote wake-up of the computer through a network. The LAN subsystem monitors network traffic at the Media Independent Interface. Upon detecting a Magic Packet* frame, the LAN subsystem asserts a wake-up signal that powers up the computer. 1.10.2.4 Wake from USB USB bus activity wakes the computer from an ACPI S3 state. NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.10.2.5 WAKE# Signal Wake-up Support When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from an ACPI S3, S4, or S5 state. 1.10.2.6 Wake from S5 When the RTC Date and Time is set in the BIOS, the computer will automatically wake from an ACPI S5 state. 34 Product Description 1.10.2.7 +5 V Standby Power Indicator LED The standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 7. Location of the Standby Power LED 35 Intel NUC D53427RKE Technical Product Specification 1.11 Intel® Security and Manageability Technologies Intel® Security and Manageability Technologies provides tools and resources to help small business owners and IT organizations protect and manage their assets in a business or institutional environment. NOTE Software with security and/or manageability capability is required to take advantage of Intel platform security and/or management technologies. 1.11.1 Intel® vPro™ Technology Intel® vPro™ Technology is a collection of platform capabilities that support enhanced manageability, security, virtualization and power efficiency. The key platform capabilities include: • • • • • • • Intel® Active Management Technology (Intel® AMT) 8.0 Intel® Virtualization (Intel® VT) Intel® Virtualization for Directed I/O (Intel® VT-d) Intel® Trusted Execution Technology (Intel® TXT) Intel® Identity Protection Technology (Intel® IPT) Intel® Anti-Theft Technology (Intel® AT) Trusted Platform Module (TPM) For information about Refer to Intel vPro Technology http://support.intel.com/support/vpro/ 1.11.1.1 Intel® Active Management Technology When used with third-party management and security applications, Intel Active Management Technology (Intel AMT) allows business owners and IT organizations to better discover, heal, and protect their networked computing assets. Some of the features of Intel AMT include: • • • • • 36 Out-of-band (OOB) system access, to discover assets even while PCs are powered off Remote trouble-shooting and recovery, which allows remote diagnosis and recovery of systems after OS failures Hardware-based agent presence checking that automatically detects and alerts when critical software agents have been stopped or are missing Proactive network defense, which uses filters to block incoming threats while isolating infected clients before they impact the network Remote hardware and software asset tracking, helping to track computer assets and keep virus protection up-to-date Product Description • Keyboard, video and mouse (KVM) remote control, which allows redirection of a managed system’s video to a remote console which can then interact with it using the console’s own mouse and keyboard NOTE Intel AMT requires the computer system to have an Intel AMT-enabled chipset, network hardware and software, as well as connection with a power source, a corporate network connection, and an Intel AMT-enabled remote management console. Setup requires additional configuration of the platform. For information about Refer to Intel Active Management Technology http://www.intel.com/technology/platformtechnology/intel-amt/index.htm 1.11.1.2 Intel® Virtualization Technology Intel® Virtualization Technology (Intel® VT) is a hardware-assisted technology that, when combined with software-based virtualization solutions, provides maximum system utilization by consolidating multiple environments into a single server or client. NOTE A processor with Intel VT does not guarantee that virtualization will work on your system. Intel VT requires a computer system with a chipset, BIOS, enabling software and/or operating system, device drivers, and applications designed for this feature. For information about Refer to Intel Virtualization Technology http://www.intel.com/technology/virtualization/tec hnology.htm 1.11.1.3 Intel® Virtualization Technology for Directed I/O Intel® Virtualization Technology for Directed I/O (Intel® VT-d) allows addresses in incoming I/O device memory transactions to be remapped to different host addresses. This provides Virtual Machine Monitor (VMM) software with: • • Improved reliability and security through device isolation using hardware assisted remapping. Improved I/O performance and availability by direct assignment of devices. For information about Refer to Intel Virtualization Technology for Directed I/O http://www.intel.com/technology/itj/2006/v10i3/2-io/4virtualization-techniques.htm 37 Intel NUC D53427RKE Technical Product Specification Intel® Trusted Execution Technology 1.11.1.4 Intel® Trusted Execution Technology (Intel® TXT) is a hardware security solution that protects systems against software-based attacks by validating the behavior of key components at startup against a known good source. It requires that Intel VT be enabled and the presence of a TPM. For information about Refer to Intel Trusted Execution Technology http://www.intel.com/content/www/us/en/architectureand-technology/trusted-execution-technology/malwarereduction-general-technology.html Intel® Identity Protection Technology 1.11.1.5 Intel® Identity Protection Technology (Intel® IPT) provides a simple way for websites and enterprises to validate that a user is logging in from a trusted computer. This is accomplished by using the Intel Manageability Engine embedded in the chipset to generate a six-digit number that, when coupled with a user name and password, will generate a One-Time Password (OTP) when visiting Intel IPT-enabled websites. Intel IPT eliminates the need for the additional token or key fob required previously for two-factor authentication. For information about Refer to Intel Identity Protection Technology http://ipt.intel.com 1.11.1.6 Intel Anti-Theft Technology ® Intel Anti-Theft (Intel® AT) provides local, tamper-resistant defense that works like a poison pill that disables the computer and access to its data even if the operating system (OS) is reimaged, a new hard drive is installed, or the computer is disconnected from the network. NOTE No computer system can provide absolute security under all conditions. Intel AT requires the computer system to have an Intel® AT-enabled chipset, BIOS, firmware release, software, and an Intel AT-capable Service Provider/ISV application and service subscription. The detection (triggers), response (actions), and recovery mechanisms only work after the Intel® AT functionality has been activated and configured. Certain functionality may not be offered by some ISVs or service providers and may not be available in all countries. Intel assumes no liability for lost or stolen data and/or systems or any other damages resulting thereof. 38 For information about Refer to Intel Anti-Theft http://antitheft.intel.com/welcome.aspx Product Description 1.11.1.7 Trusted Platform Module (TPM) The ST Micro ST33ZP24AR28PVSP version 1.2 revision 116 component is specifically designed to enhance platform security above-and-beyond the capabilities of today’s software by providing a protected space for key operations and other security critical tasks. Using both hardware and software, the TPM protects encryption and signature keys at their most vulnerable stages—operations when the keys are being used unencrypted in plain-text form. The TPM shields unencrypted keys and platform authentication information from software-based attacks. For information about Refer to ST Micro TPM version 1.2 http://www.st.com/web/en/home.html 1.11.2 Intel® Small Business Technology Intel® Small Business Technology (Intel® SBT) provides small businesses with security and productivity capabilities to help keep their PCs up-to-date, protected and running well. Intel SBT is the firmware component of Intel® Small Business Advantage (Intel® SBA) and includes this hardware functionality: • • Local Maintenance Timer – Enables applications to “wake-up” the host platform when it is powered down or in a sleep state. Local Software Monitor – Provides a common reporting mechanism to monitor applications running on the host operating system. For information about Refer to Intel Small Business Advantage http://www.intel.com/go/SBA 39 Intel NUC D53427RKE Technical Product Specification 40 2 Technical Reference 2.1 Memory Resources 2.1.1 Addressable Memory The board utilizes 16 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory). On a system that has 16 GB of system memory installed, it is not possible to use all of the installed memory due to system address space being allocated for other system critical functions. These functions include the following: • • • • • • BIOS/SPI Flash device (128 Mb) Local APIC (19 MB) Direct Media Interface (40 MB) PCI Express configuration space (256 MB) PCH base address registers PCI Express ports (up to 256 MB) Memory-mapped I/O that is dynamically allocated for PCI Express add-in cards (256 MB) The board provides the capability to reclaim the physical memory overlapped by the memory mapped I/O logical address space. The board remaps physical memory from the top of usable DRAM boundary to the 4 GB boundary to an equivalent sized logical address range located just above the 4 GB boundary. Figure 8 shows a schematic of the system memory map. All installed system memory can be used when there is no overlap of system addresses. 41 Intel NUC D53427RKE Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel and front panel USB. The other internal connectors and headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors or headers to power devices external to the computer’s chassis. A fault in the load presented by the external devices could cause damage to the computer, the power cable, and the external devices themselves. Furthermore, improper connection of USB header single wire connectors may eventually overload the overcurrent protection and cause damage to the board. This section describes the board’s connectors and headers. The connectors and headers can be divided into these groups: • • 42 Back panel I/O connectors On-board I/O connectors and headers (see page 44) Technical Reference 2.2.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors for the board. Item Description A B C D E F G LAN connector HDMI connector Mini DisplayPort connector #1 Mini DisplayPort connector #2 USB 2.0 port USB 2.0 port 19 V DC input jack Figure 8. Back Panel Connectors 43 Intel NUC D53427RKE Technical Product Specification 2.2.2 Connectors and Headers (Bottom) Figure 10 shows the locations of the connectors and headers on the bottom-side of the board. Figure 9. Connectors and Headers (Bottom) 44 Technical Reference Table 10 lists the connectors and headers identified in Figure 10. Table 10. Connectors and Headers Shown in Figure 10 Item from Figure 10 Description A PCI Express Full-Mini Card connector B PCI Express Half-Mini Card connector C Front panel dual-port USB 2.0 header D Front panel header E Intel MEBX Reset header F Internal DC power connector 45 Intel NUC D53427RKE Technical Product Specification 2.2.2.1 Signal Tables for the Connectors and Headers Table 11. PCI Express Full-/Half-Mini Card Connector Pin Signal Name 1 WAKE# 2 +3.3 V aux 3 Reserved 4 GND 5 Reserved 6 1.5 V 7 CLKREQ# 8 Reserved 9 GND 10 Reserved 11 REFCLK- 12 Reserved 13 REFCLK+ 14 Reserved 15 GND 16 Reserved 17 Reserved 18 GND 19 Reserved 20 Reserved 21 GND 22 PERST# 23 PERn0 24 +3.3 V aux 25 PERp0 26 GND 27 GND 28 +1.5 V 29 GND 30 SMB_CLK 31 PETn0 32 SMB_DATA 33 PETp0 34 GND 35 GND 36 USB_D- 37 GND 38 USB_D+ Additional Signal Name continued 46 Technical Reference Table 11. PCI Express Full-/Half-Mini Card Connector (continued) Pin Signal Name 39 +3.3 V aux 40 GND 41 +3.3 V aux 42 LED_WWAN# 43 GND 44 LED_WLAN# 45 Reserved 46 LED_WPAN# 47 Reserved 48 +1.5V 49 Reserved 50 GND 51 Reserved 52 +3.3 V aux Additional Signal Name (mSATA) NC (Intel AMT) C-Link_CLK* (Intel AMT) C-Link_DAT* (Intel AMT) C-Link_RST* (mSATA) mSATA SEL NOTE The mSATA signals are routed only to the PCIe full-mini card connector and not to the half-mini card connector. These signals are required to support mSATA modules. NOTE The Intel AMT C-Link signals are routed only to the PCIe half-mini card connector and not to the full-mini card connector. These signals are required to support Intel AMT Wake-on-LAN for wireless cards. 47 Intel NUC D53427RKE Technical Product Specification Table 12. Dual-Port Front Panel USB 2.0 Header Pin Signal Name Pin Signal Name 1 +5 V DC 2 +5 V DC 3 D− 4 D− 5 D+ 6 D+ 7 Ground 8 Ground 9 KEY (no pin) 10 No Connect 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • 48 One PCI Express Half-Mini Card One PCI Express Full-Mini Card Technical Reference 2.2.2.3 Power Supply Connectors The board has the following power supply connectors: • • External Power Supply – the board can be powered through a 19 V DC connector on the back panel. The back panel DC connector is compatible with a 5.5 mm/OD (outer diameter) and 2.5 mm/ID (inner diameter) plug, where the inner contact is +19 (±10%) V DC and the shell is GND. The maximum current rating is 10 A. Internal Power Supply – the board can alternatively be powered via the internal 19 V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +19 (±10%) VDC. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply. Table 13. 19 V Internal Power Supply Connector Pin Signal Name 1 Ground 2 +19 V (±10%) For information about Refer to Power supply considerations Section 2.5.1, page 56 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 14 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 14. Front Panel Header Pin Signal Name Description Pin Signal Name Description 1 HDD_POWER_LED Pull-up resistor (750 Ω) to +5V 2 POWER_LED_MAIN [Out] Front panel LED (main color) 3 HDD_LED# [Out] Hard disk activity LED 4 POWER_LED_ALT [Out] Front panel LED (alt color) 5 GROUND Ground 6 POWER_SWITCH# [In] Power switch 7 RESET_SWITCH# [In] Reset switch 8 GROUND Ground 9 +5V_DC Power 10 Key No pin 49 Intel NUC D53427RKE Technical Product Specification Figure 10. Connection Diagram for Front Panel Header 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA hard drive or optical drive connected to an onboard SATA connector. 2.2.2.4.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.4.3 Power/Sleep LED Header Pins 2 and 4 can be connected to a one- or two-color LED. Table 15 shows the possible LED states. Table 15. States for a One-Color Power LED LED State Description Off Power off Blinking Standby Steady Normal operation NOTE The LED behavior shown in Table 15 is default – other patterns may be set via BIOS setup. 50 Technical Reference 2.2.2.4.4 Power Switch Header Pins 6 and 8 can be connected to a front panel momentary-contact power switch. The switch must pull the SW_ON# pin to ground for at least 50 ms to signal the power supply to switch on or off. (The time requirement is due to internal debounce circuitry on the board.) At least two seconds must pass before the power supply will recognize another on/off signal. 2.2.2.5 Front Panel USB 2.0 Header Figure 12 is a connection diagram for the front panel USB 2.0 header. NOTE • • The +5 V DC power on the USB header is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 11. Connection Diagram for Front Panel USB 2.0 Dual-Port Header 51 Intel NUC D53427RKE Technical Product Specification 2.3 BIOS Setup Configuration Jumper CAUTION Do not move a jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 13 shows the location of the BIOS Setup Configuration jumper. Table 16 describes the BIOS Setup configuration jumper settings for the three modes: normal, configure, and recovery. When the jumper is set to configure mode and the computer is powered-up, the BIOS compares the processor version and the microcode version in the BIOS and reports if the two match. Figure 12. Location of the BIOS Configuration Setup Jumper 52 Technical Reference Table 16 lists the settings for the jumper. Table 16. BIOS Setup Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Note that this Configure mode is the only way to clear the BIOS/CMOS settings. Press F9 (restore defaults) while in Configure mode to restore the BIOS/CMOS settings to their default values. Recovery 2.4 None The BIOS attempts to recover the BIOS configuration. A recovery CD or flash drive is required. Intel® Management Engine BIOS Extension (Intel® MEBX) Reset Header The Intel® MEBX reset header (see Figure 13) allows you to reset the Intel ME configuration to the factory defaults. Momentarily shorting pins 1 and 2 with a jumper (not supplied) will accomplish the following: • • Return all Intel ME parameters to their default values. Reset the Intel MEBX password to the default value (admin). CAUTION Always turn off the power and unplug the power cord from the computer before installing an MEBX reset jumper. The jumper must be removed before reapplying power. The system must be allowed to reach end of POST before reset is complete. Otherwise, the board could be damaged. NOTE After using the MEBX Reset, a “CMOS battery failure” warning will occur during the next POST. This is expected and does not indicate a component failure. 53 Intel NUC D53427RKE Technical Product Specification Figure 13. Intel MEBX Reset Header Table 17. Intel MEBX Reset Header Signals 54 Pin Function 1 PCH_RTCRST_PULLUP 2 Ground 3 No connection Technical Reference 2.5 2.5.1 Mechanical Considerations Form Factor The board is designed to fit into a custom chassis. Figure 14 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 4.0 inches by 4.0 inches [101.60 millimeters by 101.60 millimeters]. Figure 14. Board Dimensions 55 Intel NUC D53427RKE Technical Product Specification 2.6 2.6.1 Electrical Considerations Power Supply Considerations CAUTION The external 19 V DC jack is the primary power input connector of Intel NUC Board D53427RKE. However, the board also provides an internal 1 x 2 power connector that can be used in custom-developed systems that have a custom internal power supply. The internal 1 x 2 power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply. There is no isolation circuitry between the external 19 V DC jack and the internal 1 x 2 power connector. It is the system integrator’s responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external 19 V DC jack is covered if the internal 1 x 2 power connector is to be used. Simultaneous connection of both external and internal power supply units could result in potential damage to the board, power supplies, or other hardware. System power requirements will depend on actual system configurations chosen by the integrator, as well as end user expansion preferences. It is the system integrator’s responsibility to ensure an appropriate power budget for the system configuration is properly assessed based on the system-level components chosen. 56 Technical Reference 2.6.2 Fan Header Current Capability Table 18 lists the current capability of the fan headers. Table 18. Fan Header Current Capability 2.7 Fan Header Maximum Available Current Processor fan .1 A Thermal Considerations CAUTION A chassis with a maximum internal ambient temperature of 58 oC at the processor fan inlet is a requirement. Whenever possible, use of a processor heat sink that provides omni-directional airflow to maintain required airflow across the processor voltage regulator area is recommended. CAUTION Failure to ensure appropriate airflow may result in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. All responsibility for determining the adequacy of any thermal or system design remains solely with the system integrator. Intel makes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. CAUTION Ensure that the ambient temperature does not exceed the board’s maximum operating temperature. Failure to do so could cause components to exceed their maximum case temperature and malfunction. For information about the maximum operating temperature, see the environmental specifications in Section 2.8. CAUTION The processor voltage regulator area (shown in Figure 15) can reach a temperature of up to 97.5 oC in an open chassis. Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure to do so may result in shorter than expected product lifetime. 57 Intel NUC D53427RKE Technical Product Specification Figure 15 shows the locations of the localized high temperature zones. Item Description A B Processor voltage regulator area Thermal solution Figure 15. Localized High Temperature Zones 58 Technical Reference Table 19 provides maximum case temperatures for the components that are sensitive to thermal changes. The operating temperature, current load, or operating frequency could affect case temperatures. Maximum case temperatures are important when considering proper airflow to cool the board. Table 19. Thermal Considerations for Components Component Maximum Case Temperature Processor For processor case temperature, see processor datasheets and processor specification updates Intel QS77 Express Chipset 104 oC To ensure functionality and reliability, the component is specified for proper operation when Case Temperature is maintained at or below the maximum temperature listed in Table 20. This is a requirement for sustained power dissipation equal to Thermal Design Power (TDP is specified as the maximum sustainable power to be dissipated by the components). When the component is dissipating less than TDP, the case temperature should be below the Maximum Case Temperature. The surface temperature at the geometric center of the component corresponds to Case Temperature. It is important to note that the temperature measurement in the system BIOS is a value reported by embedded thermal sensors in the components and does not directly correspond to the Maximum Case Temperature. The upper operating limit when monitoring this thermal sensor is Tcontrol. Table 20. Tcontrol Values for Components Component Tcontrol Processor For processor case temperature, see processor datasheets and processor specification updates Intel QS77 Express Chipset 104 oC For information about Refer to Processor datasheets and specification updates Section 1.2, page 18 Intel® 7 Series Chipset Thermal Mechanical Specifications and Design Guidelines http://www.intel.com/Products/Desktop/ Chipsets/ec-QS77/QS77technicaldocuments.htm 59 Intel NUC D53427RKE Technical Product Specification 2.8 Reliability The Mean Time Between Failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Telcordia SR-332 Issue 2, Method I, Case 3, 55 ºC ambient. The MTBF prediction is used to estimate repair rates and spare parts requirements. The MTBF for the board is 71,537 hours. 2.9 Environmental Table 21 lists the environmental specifications for the board. Table 21. Environmental Specifications Parameter Specification Temperature Non-Operating -40 °C to +60 °C Operating 0 °C to +50 °C Shock Unpackaged 50 g trapezoidal waveform Velocity change of 170 inches/s² Packaged Half sine 2 millisecond Product Weight (pounds) Free Fall (inches) Velocity Change (inches/s²) <20 36 167 21-40 30 152 41-80 24 136 81-100 18 118 Vibration Unpackaged 5 Hz to 20 Hz: 0.01 g² Hz sloping up to 0.02 g² Hz 20 Hz to 500 Hz: 0.02 g² Hz (flat) Packaged 5 Hz to 40 Hz: 0.015 g² Hz (flat) 40 Hz to 500 Hz: 0.015 g² Hz sloping down to 0.00015 g² Hz 60 3 Overview of BIOS Features 3.1 Introduction The board uses an Intel® Visual BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the Visual BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as RKPPT10H.86A. When the BIOS Setup configuration jumper is set to configure mode and the computer is powered-up, the BIOS compares the CPU version and the microcode version in the BIOS and reports if the two match. The Visual BIOS Setup program can be used to view and change the BIOS settings for the computer. The BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Figure 16. Intel Visual BIOS Home Screen 61 Intel NUC D53427RKE Technical Product Specification NOTE The maintenance menu is displayed only when the board is in configure mode. Section 2.3 on page 52 shows how to put the board in configure mode. 3.2 BIOS Flash Memory Organization The Serial Peripheral Interface Flash Memory (SPI Flash) includes a 128 Mb (16000 KB) flash memory device. 3.3 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components. The MIF database defines the data and provides the method for accessing this information. The BIOS enables applications such as third-party management software to use SMBIOS. The BIOS stores and reports the following SMBIOS information: • • • • BIOS data, such as the BIOS revision level Fixed-system data, such as peripherals, serial numbers, and asset tags Resource data, such as memory size, cache size, and processor speed Dynamic data, such as event detection and error logging Non-Plug and Play operating systems require an additional interface for obtaining the SMBIOS information. The BIOS supports an SMBIOS table interface for such operating systems. Using this support, an SMBIOS service-level application running on a non-Plug and Play operating system can obtain the SMBIOS information. Additional board information can be found in the BIOS under the Additional Information header under the Main BIOS page. 3.4 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system’s USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1. When you apply power to the computer, legacy support is disabled. 2. POST begins. 3. Legacy USB support is enabled by the BIOS allowing you to use a USB keyboard to enter and configure the BIOS Setup program and the maintenance menu. 62 Overview of BIOS Features 4. POST completes. 5. The operating system loads. While the operating system is loading, USB keyboards and mice are recognized and may be used to configure the operating system. (Keyboards and mice are not recognized during this period if Legacy USB support was set to Disabled in the BIOS Setup program.) 6. After the operating system loads the USB drivers, all legacy and non-legacy USB devices are recognized by the operating system, and Legacy USB support from the BIOS is no longer used. 7. Additional USB legacy feature options can be access by using Intel® Integrator Toolkit. To install an operating system that supports USB, verify that Legacy USB support in the BIOS Setup program is set to Enabled and follow the operating system’s installation instructions. 3.5 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web. Intel® Flash Memory Update Utility, which requires booting from DOS. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM. Intel® F7 switch during POST allows a user to select where the BIOS .bio file is located and perform the update from that location/device. Similar to performing a BIOS Recovery without removing the BIOS configuration jumper. Both utilities verify that the updated BIOS matches the target system to prevent accidentally installing an incompatible BIOS. NOTE Review the instructions distributed with the upgrade utility before attempting a BIOS update. For information about Refer to BIOS update utilities http://support.intel.com/support/motherboards/desktop/sb /CS-022312.htm 3.5.1 Language Support The BIOS Setup program and help messages are supported in US English. Check the Intel web site for support. 63 Intel NUC D53427RKE Technical Product Specification 3.5.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. For information about Refer to Intel Integrator Toolkit www.intel.com/go/itk Additional Intel® software tools www.intel.com/go/itk 3.6 BIOS Recovery It is unlikely that anything will interrupt a BIOS update; however, if an interruption occurs, the BIOS could be damaged. Table 22 lists the drives and media types that can and cannot be used for BIOS recovery. The BIOS recovery media does not need to be made bootable. Table 22. Acceptable Drives/Media Types for BIOS Recovery Media Type (Note) Can be used for BIOS recovery? Hard disk drive (connected to SATA or USB) Yes CD/DVD drive (connected to SATA or USB) Yes USB flash drive Yes USB diskette drive (with a 1.4 MB diskette) No (BIOS update file is bigger than 1.4 MB size limit) NOTE Supported file systems for BIOS recovery: • • • • • 64 NTFS (sparse, compressed, or encrypted files are not supported) FAT32 FAT16 FAT12 ISO 9660 For information about Refer to BIOS recovery http://www.intel.com/support/motherboards/desktop/sb/cs-023360.htm Overview of BIOS Features 3.7 Boot Options In the BIOS Setup program, the user can choose to boot from a hard drive, optical drive, removable drive, or the network. The default setting is for the optical drive to be the first boot device, the hard drive second, removable drive third, and the network fourth. 3.7.1 Network Boot The network can be selected as a boot device. This selection allows booting from the onboard LAN or a network add-in card with a remote boot ROM installed. Pressing the <F12> key during POST automatically forces booting from the LAN. To use this key during POST, the User Access Level in the BIOS Setup program's Security menu must be set to Full. 3.7.2 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • • • Video adapter Keyboard Mouse 3.7.3 Changing the Default Boot Device During POST Pressing the <F10> key during POST causes a boot device menu to be displayed. This menu displays the list of available boot devices. Table 23 lists the boot device menu options. Table 23. Boot Device Menu Options Boot Device Menu Function Keys Description <↑> or <↓> Selects a default boot device <Enter> Exits the menu, and boots from the selected device <Esc> Exits the menu and boots according to the boot priority defined through BIOS setup 65 Intel NUC D53427RKE Technical Product Specification 3.8 Hard Disk Drive Password Security Feature The Hard Disk Drive Password Security feature blocks read and write accesses to the hard disk drive until the correct password is given. Hard Disk Drive Passwords are set in BIOS SETUP and are prompted for during BIOS POST. For convenient support of S3 resume, the system BIOS will automatically unlock drives on resume from S3. The User hard disk drive password, when installed, will be required upon each powercycle until the Master Key or User hard disk drive password is submitted. The Master Key hard disk drive password, when installed, will not lock the drive. The Master Key hard disk drive password exists as an unlock override in the event that the User hard disk drive password is forgotten. Only the installation of the User hard disk drive password will cause a hard disk to be locked upon a system power-cycle. Table 24 shows the effects of setting the Hard Disk Drive Passwords. Table 24. Master Key and User Hard Drive Password Functions Password Set Password During Boot Neither None Master only None User only User only Master and User Set Master or User During every POST, if a User hard disk drive password is set, POST execution will pause with the following prompt to force the user to enter the Master Key or User hard disk drive password: Enter Hard Disk Drive Password: Upon successful entry of the Master Key or User hard disk drive password, the system will continue with normal POST. If the hard disk drive password is not correctly entered, the system will go back to the above prompt. The user will have three attempts to correctly enter the hard disk drive password. After the third unsuccessful hard disk drive password attempt, the system will halt with the message: Hard Disk Drive Password Entry Error A manual power cycle will be required to resume system operation. NOTE As implemented on D53427RKE, Hard Disk Drive Password Security is only supported on SATA port 0. The passwords are stored on the hard disk drive so if the drive is relocated to another computer that does not support Hard Disk Drive Password Security feature, the drive will not be accessible. 66 Overview of BIOS Features 3.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer. A supervisor password and a user password can be set for the BIOS Setup program and for booting the computer, with the following restrictions: • • • • • • • • The supervisor password gives unrestricted access to view and change all the Setup options in the BIOS Setup program. This is the supervisor mode. The user password gives restricted access to view and change Setup options in the BIOS Setup program. This is the user mode. If only the supervisor password is set, pressing the <Enter> key at the password prompt of the BIOS Setup program allows the user restricted access to Setup. If both the supervisor and user passwords are set, users can enter either the supervisor password or the user password to access Setup. Users have access to Setup respective to which password is entered. Setting the user password restricts who can boot the computer. The password prompt will be displayed before the computer is booted. If only the supervisor password is set, the computer boots without asking for a password. If both passwords are set, the user can enter either password to boot the computer. For enhanced security, use different passwords for the supervisor and user passwords. Valid password characters are A-Z, a-z, and 0-9. Passwords may be up to 19 characters in length. To clear a set password, enter a blank password after entering the existing password. Table 25 shows the effects of setting the supervisor password and user password. This table is for reference only and is not displayed on the screen. Table 25. Supervisor and User Password Functions Setup Options Password to Enter Setup Password During Boot None None None Can change a limited number of options Supervisor Password Supervisor None N/A Can change all options Enter Password Clear User Password User User Can change all options Can change a limited number of options Supervisor Password Enter Password Supervisor or user Supervisor or user Password Set Supervisor Mode User Mode Neither Can change all options (Note) Can change all options (Note) Supervisor only Can change all options User only Supervisor and user set Note: If no password is set, any user can change all Setup options. 67 Intel NUC D53427RKE Technical Product Specification 68 4 Error Messages and Blink Codes 4.1 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 26). Table 26. Front-panel Power LED Blink Codes Type Pattern Note BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds. The pattern repeats until the BIOS update is complete. Video error (Note) On-off (1.0 second each) two times, then 2.5-second pause (off), entire pattern repeats (blink and pause) until the system is powered off. Memory error On-off (1.0 second each) three times, then 2.5-second pause (off), entire pattern repeats (blinks and pause) until the system is powered off. Thermal trip warning Each beep will be accompanied by the following blink pattern: .25 seconds on, .25 seconds off, .25 seconds on, .25 seconds off. This will result in a total of 16 blinks. When no VGA option ROM is found. Note: Disabled per default BIOS setup option. 4.2 BIOS Error Messages Table 27 lists the error messages and provides a brief description of each. Table 27. BIOS Error Messages Error Message Explanation CMOS Battery Low The battery may be losing power. Replace the battery soon. CMOS Checksum Bad The CMOS checksum is incorrect. CMOS memory may have been corrupted. Run Setup to reset values. Memory Size Decreased Memory size has decreased since the last boot. If no memory was removed, then memory may be bad. No Boot Device Available System did not find a device to boot. 69 Intel NUC D53427RKE Technical Product Specification 70 5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel NUC Board D53427RKE: • • • • • 5.1.1 Safety standards European Union Declaration of Conformity statement Product Ecology statements Electromagnetic Compatibility (EMC) standards Product certification markings Safety Standards Intel NUC Board D53427RKE complies with the safety standards stated in Table 28 when correctly installed in a compatible host system. Table 28. Safety Standards Standard Title CSA/UL 60950-1 Information Technology Equipment – Safety - Part 1: General Requirements (USA and Canada) EN 60950-1 Information Technology Equipment – Safety - Part 1: General Requirements (European Union) IEC 60950-1 Information Technology Equipment – Safety - Part 1: General Requirements (International) 71 Intel NUC D53427RKE Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the products Intel® NUC Board D53427RKE is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive), 2006/95/EC (Low Voltage Directive), and 2002/95/EC (ROHS Directive). The product is properly CE marked demonstrating this conformity and is for distribution within all member states of the EU with no restrictions. This product follows the provisions of the European Directives 2004/108/EC, 2006/95/EC, and 2002/95/EC. Čeština Tento výrobek odpovídá požadavkům evropských směrnic 2004/108/EC, 2006/95/EC a 2002/95/EC. Dansk Dette produkt er i overensstemmelse med det europæiske direktiv 2004/108/EC, 2006/95/EC & 2002/95/EC. Dutch Dit product is in navolging van de bepalingen van Europees Directief 2004/108/EC, 2006/95/EC & 2002/95/EC. Eesti Antud toode vastab Euroopa direktiivides 2004/108/EC, ja 2006/95/EC ja 2002/95/EC kehtestatud nõuetele. Suomi Tämä tuote noudattaa EU-direktiivin 2004/108/EC, 2006/95/EC & 2002/95/EC määräyksiä. Français Ce produit est conforme aux exigences de la Directive Européenne 2004/108/EC, 2006/95/EC & 2002/95/EC. Deutsch Dieses Produkt entspricht den Bestimmungen der Europäischen Richtlinie 2004/108/EC, 2006/95/EC & 2002/95/EC. Ελληνικά Το παρόν προϊόν ακολουθεί τις διατάξεις των Ευρωπαϊκών Οδηγιών 2004/108/EC, 2006/95/EC και 2002/95/EC. Magyar E termék megfelel a 2004/108/EC, 2006/95/EC és 2002/95/EC Európai Irányelv előírásainak. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 2004/108/EC, 2006/95/EC, & 2002/95/EC. Italiano Questo prodotto è conforme alla Direttiva Europea 2004/108/EC, 2006/95/EC & 2002/95/EC. Latviešu Šis produkts atbilst Eiropas Direktīvu 2004/108/EC, 2006/95/EC un 2002/95/EC noteikumiem. Lietuvių Šis produktas atitinka Europos direktyvų 2004/108/EC, 2006/95/EC, ir 2002/95/EC nuostatas. Malti Dan il-prodott hu konformi mal-provvedimenti tad-Direttivi Ewropej 2004/108/EC, 2006/95/EC u 2002/95/EC. Norsk Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2004/108/EC, 2006/95/EC & 2002/95/EC. Polski Niniejszy produkt jest zgodny z postanowieniami Dyrektyw Unii Europejskiej 2004/108/EC, 206/95/EC i 2002/95/EC. 72 Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC, 2006/95/EC & 2002/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC, 2006/95/EC & 2002/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC, 2006/95/EC a 2002/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC, 2006/95/EC in 2002/95/EC. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 2004/108/EC, 2006/95/EC & 2002/95/EC. Türkçe Bu ürün, Avrupa Birliği’nin 2004/108/EC, 2006/95/EC ve 2002/95/EC yönergelerine uyar. 5.1.3 Product Ecology Statements The following information is provided to address worldwide product ecology concerns and regulations. 5.1.3.1 Disposal Considerations This product contains the following materials that may be regulated upon disposal: printed wiring board assembly and lithium battery. 73 Intel NUC D53427RKE Technical Product Specification 5.1.4 EMC Regulations Intel NUC Board D53427RKE complies with the EMC regulations stated in Table 29 when correctly installed in a compatible host system. Table 29. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part 15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Interference-Causing Equipment Standard, Digital Apparatus. (Canada) EN55022 Limits and methods of measurement of Radio Interference Characteristics of Information Technology Equipment. (European Union) EN55024 Information Technology Equipment – Immunity Characteristics Limits and methods of measurement. (European Union) EN55022 Australian Communications Authority, Standard for Electromagnetic Compatibility. (Australia and New Zealand) CISPR 22 Limits and methods of measurement of Radio Disturbance Characteristics of Information Technology Equipment. (International) CISPR 24 Information Technology Equipment – Immunity Characteristics – Limits and Methods of Measurement. (International) VCCI V-3, V-4 Voluntary Control for Interference by Information Technology Equipment. (Japan) KN-22, KN-24 Korean Communications Commission – Framework Act on Telecommunications and Radio Waves Act (South Korea) CNS 13438 Bureau of Standards, Metrology, and Inspection (Taiwan) FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124 1-800-628-8686 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • 74 Reorient or relocate the receiving antenna. Regulatory Compliance and Battery Disposal Information • • • Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to operate the equipment. Tested to comply with FCC standards for home or office use. Canadian Department of Communications Compliance Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des Communications du Canada. Japan VCCI Statement Japan VCCI Statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. Korea Class B Statement Korea Class B Statement translation: This equipment is for home use, and has acquired electromagnetic conformity registration, so it can be used not only in residential areas, but also other areas. 75 Intel NUC D53427RKE Technical Product Specification 5.1.5 ENERGY STAR* 5.2, e-Standby, and ErP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of new requirements. Intel NUC Board D53427RKE allows for a compliant system built to meet the following program requirements, including appropriate selection of an efficient power supply: • • • • • ENERGY STAR v5.2, category B EPEAT* Korea e-Standby European Union Energy-related Products Directive 2013 (ErP) Lot 6 ENERGY STAR v6.0 draft 3 NOTE ENERGY STAR denotes a system level energy specification, defined by the US Environmental Protection Agency, that relies upon all of the system's components, including processor, chipset, power supply, HDD, graphics controller, memory, etc. to meet the specification. For more information on ENERGY STAR Computers Program requirements version 5.2, go to: http://www.energystar.gov 76 For information about Refer to ENERGY STAR requirements and recommended configurations http://www.intel.com/go/energystar Electronic Product Environmental Assessment Tool (EPEAT) http://www.epeat.net/ Korea e-Standby Program http://www.kemco.or.kr/new_eng/pg02 /pg02100300.asp European Union Energy-related Products Directive 2009 (ErP) http://ec.europa.eu/enterprise/policies/s ustainable-business/sustainableproduct-policy/ecodesign/index_en.htm Regulatory Compliance and Battery Disposal Information 5.1.6 Regulatory Compliance Marks (Board Level) Intel NUC Board D53427RKE has the regulatory compliance marks shown in Table 30. Table 30. Regulatory Compliance Marks Description Mark UL joint US/Canada Recognized Component mark. Includes adjacent UL file number for Intel NUC Boards: E210882. FCC Declaration of Conformity logo mark for Class B equipment. CE mark. Declaring compliance to the European Union (EU) EMC directive, Low Voltage directive, and RoHS directive. Australian Communications Authority (ACA) and New Zealand Radio Spectrum Management (NZ RSM) C-tick mark. Includes adjacent Intel supplier code number, N-232. Japan VCCI (Voluntary Control Council for Interference) mark. Korea Certification mark. Includes an adjacent KCC (Korean Communications Commission) certification number: KCC-REM-CPU-D53427RKE. Taiwan BSMI (Bureau of Standards, Metrology and Inspections) mark. Includes adjacent Intel company number, D33025. Printed wiring board manufacturer’s recognition mark. Consists of a unique UL recognized manufacturer’s logo, along with a flammability rating (solder side). V-0 China RoHS/Environmentally Friendly Use Period Logo: This is an example of the symbol used on Intel NUC Boards and associated collateral. The color of the mark may vary depending upon the application. The Environmental Friendly Usage Period (EFUP) for Intel NUC Boards has been determined to be 10 years. 77 Intel NUC D53427RKE Technical Product Specification 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible. La mise au rebut des piles usagées doit respecter les réglementations locales en vigueur en matière de protection de l'environnement. FORHOLDSREGEL Eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. Batterier bør om muligt genbruges. Bortskaffelse af brugte batterier bør foregå i overensstemmelse med gældende miljølovgivning. OBS! Det kan oppstå eksplosjonsfare hvis batteriet skiftes ut med feil type. Brukte batterier bør kastes i henhold til gjeldende miljølovgivning. VIKTIGT! Risk för explosion om batteriet ersätts med felaktig batterityp. Batterier ska kasseras enligt de lokala miljövårdsbestämmelserna. VARO Räjähdysvaara, jos pariston tyyppi on väärä. Paristot on kierrätettävä, jos se on mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti. VORSICHT Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur durch denselben oder einen entsprechenden, vom Hersteller empfohlenen Batterietyp ersetzt werden. Entsorgen Sie verbrauchte Batterien den Anweisungen des Herstellers entsprechend. AVVERTIMENTO Esiste il pericolo di un esplosione se la pila non viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate dal produttore. Per disfarsi delle pile usate, seguire le istruzioni del produttore. 78 Regulatory Compliance and Battery Disposal Information PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij. Batterijen moeten zoveel mogelijk worden gerecycled. Houd u bij het weggooien van gebruikte batterijen aan de plaatselijke milieuwetgeving. ATENÇÃO Haverá risco de explosão se a bateria for substituída por um tipo de bateria incorreto. As baterias devem ser recicladas nos locais apropriados. A eliminação de baterias usadas deve ser feita de acordo com as regulamentações ambientais da região. AŚCIAROŽZNAŚĆ Існуе рызыка выбуху, калі заменены акумулятар неправільнага тыпу. Акумулятары павінны, па магчымасці, перепрацоўвацца. Пазбаўляцца ад старых акумулятараў патрэбна згодна з мясцовым заканадаўствам па экалогіі. UPOZORNÌNÍ V případě výměny baterie za nesprávný druh může dojít k výbuchu. Je-li to možné, baterie by měly být recyklovány. Baterie je třeba zlikvidovat v souladu s místními předpisy o životním prostředí. Προσοχή Υπάρχει κίνδυνος για έκρηξη σε περίπτωση που η μπαταρία αντικατασταθεί από μία λανθασμένου τύπου. Οι μπαταρίες θα πρέπει να ανακυκλώνονται όταν κάτι τέτοιο είναι δυνατό. Η απόρριψη των χρησιμοποιημένων μπαταριών πρέπει να γίνεται σύμφωνα με τους κατά τόπο περιβαλλοντικούς κανονισμούς. VIGYÁZAT Ha a telepet nem a megfelelő típusú telepre cseréli, az felrobbanhat. A telepeket lehetőség szerint újra kell hasznosítani. A használt telepeket a helyi környezetvédelmi előírásoknak megfelelően kell kiselejtezni. 79 Intel NUC D53427RKE Technical Product Specification AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska. PRECAUŢIE Risc de explozie, dacă bateria este înlocuită cu un tip de baterie necorespunzător. Bateriile trebuie reciclate, dacă este posibil. Depozitarea bateriilor uzate trebuie să respecte reglementările locale privind protecţia mediului. ВНИМАНИЕ При использовании батареи несоответствующего типа существует риск ее взрыва. Батареи должны быть утилизированы по возможности. Утилизация батарей должна проводится по правилам, соответствующим местным требованиям. UPOZORNENIE Ak batériu vymeníte za nesprávny typ, hrozí nebezpečenstvo jej výbuchu. Batérie by sa mali podľa možnosti vždy recyklovať. Likvidácia použitých batérií sa musí vykonávať v súlade s miestnymi predpismi na ochranu životného prostredia. POZOR Zamenjava baterije z baterijo drugačnega tipa lahko povzroči eksplozijo. Če je mogoče, baterije reciklirajte. Rabljene baterije zavrzite v skladu z lokalnimi okoljevarstvenimi predpisi. UYARI Yanlış türde pil takıldığında patlama riski vardır. Piller mümkün olduğunda geri dönüştürülmelidir. Kullanılmış piller, yerel çevre yasalarına uygun olarak atılmalıdır. OСТОРОГА Використовуйте батареї правильного типу, інакше існуватиме ризик вибуху. Якщо можливо, використані батареї слід утилізувати. Утилізація використаних батарей має бути виконана згідно місцевих норм, що регулюють охорону довкілля. 80 Regulatory Compliance and Battery Disposal Information 81 Intel NUC D53427RKE Technical Product Specification 82