SAW Bandpass Filter F1G8A Features PCS applications Usable bandwidth 58.9 MHz No impedance matching require for operation at 50 Ω SMD Package 1.4 mm × 1.0 mm× 0.5 mm Single-ended Operation Package Dimensions 4 5 1 2 3 Side View Top View Bottom View Pin Configuration 1 Input 4 Output 2, 3, 5 Ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range °C -30 25 85 Storage Temperature Range °C - - - Power Handling Capability dBm - - - Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 1/7 SAW Bandpass Filter F1G8A Specifications Fc =1880.0MHz Terminating source impedance : Terminating load impedance : single 50Ω Center Frequency Insertion Loss (1850.6~1909.4 MHz) Amplitude Ripple (1850.6~1909.4 MHz) Relative Attenuation D.C. ~ 1570 MHz 1570 ~ 1580 MHz 1580 ~ 1770 MHz 1770 ~ 1829.4 MHz 1930.6 ~ 1989.4 MHz 1989.4 ~ 3000 MHz VSWR (1850.6~1909.4 MHz) single 50Ω Minimum Typical Maximum MHz - 1880.0 - dB - 2.4 4.8 dB p-p - 1.3 2.7 dB 40.0 35.0 30.0 20.0 17.0 12.0 48.0 46.0 54.0 39.0 39.0 22.0 - - - 2.0 2.5 Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 2/7 SAW Bandpass Filter F1G8A Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 3/7 SAW Bandpass Filter F1G8A Typical Performance I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 4/7 SAW Bandpass Filter F1G8A S11, S22 VSWR S11, S22 Smith Chart I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 5/7 SAW Bandpass Filter F1G8A S21 Wide Band I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 6/7 SAW Bandpass Filter F1G8A Packing Specification 1. Reeling Quantity : 3,000 pcs / reel (or 15,000 pcs / reel) 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. NCLL01-F1G8A Rev. Date 2010-12-17 Rev. PS01 7/7