ITF F2202

SAW Bandpass Filter F2202
Features
RF bandpass filter
Usable bandwidth 0.6MHz
No matching single-ended operation
Ceramic Surface Mounted Device Package ( 5.0 mm × 5.0 mm )
5.00±0.15
1.2±0.15
3
ITF
2202
7
7
1
6
6
2
5
5
3
4
1.27±0.05
2
8
1.35±0.15
5.00±0.15
8
1
0.6±0.15
2.08±0.15
Package Dimensions
4
Dimensions shown are nominal in millimeters
Pin Configurations
Body : Al2O3 Ceramic
Lid : Kovar, Ni Plated
Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um
Ni Plating
2
Input
6
Output
1, 3, 4, 5, 7, 8
Ground
Maximum Ratings
Parameters
Unit
Minimum
Typical
Maximum
Operating Temperature Range
°C
-30
25
85
Storage Temperature Range
°C
-40
-
85
Power Handling Capability
dBm
-
-
10
Electrostatics Sensitive Device (ESD)
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
1/7
SAW Bandpass Filter F2202
Preliminary Specifications
Minimum
Typical
Maximum
Unit
Center Frequency ( Fc )
-
220.0
-
MHz
Insertion Loss
-
2.5
3.5
dB
0.6
2.0
Amplitude Ripple (Fc ± 0.3MHz)
-
0.5
1.5
VSWR (Fc ± 0.3MHz)
-
1.5
2.0
Attenuation
~ Fc -10.7MHz
Fc + 10.7MHz ~
37
25
-
-
dB
Temperature Range (Operational)
-30
25
85
℃
Pass Bandwidth
Input/Output Impedance
MHz
dB
50
Ohms
Notes :
1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and
full 2 port calibration.
2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing
tolerances
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
2/7
SAW Bandpass Filter F2202
Matching Schematic
( Actual matching values may vary due to PCB layout and parasitics )
Input
50Ω
Output
50Ω
Marking Configuration
ITF 1)
2202 2)
1) Manufacturer name
2) Marking Number
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
3/7
SAW Bandpass Filter F2202
Frequency Response
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
4/7
SAW Bandpass Filter F2202
Input / Output VSWR Charts
Input / Output Smith Charts
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
5/7
SAW Bandpass Filter F2202
Packing Specification
1. Reeling Quantity : 3000 pcs / 13” reel ( or 1000 pcs / 7” reel )
2. Taping Structure : The tape shall be wound around the reel in the direction shown below.
TOP COVER TAPE
REEL
CARRIER TAPE
Tape Specification
1. Leader part and vacant position specification
Vacant
150mm min.
Component
contained
Vacant
150mm min.
Leader part
250mm min.
END
START
Tape Running Direction
2. Tensile strength of carrier tape
4.4N/mm width
Direction of pull
Top cover tape
3. Top cover tape adhesion
0~15 degree
1) pull off angle : 0~15°
2) speed : 300mm/min
3) force : 20~70g
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Carrier tape
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
6/7
SAW Bandpass Filter F2202
Carrier Tape Dimensions [unit : mm]
A
5.50 ± 0.1
B
5.50 ± 0.1
C
7.25 ± 0.1
D
1.95 ± 0.1
E
12.00 ± 0.1
F
8.00 ± 0.1
Part Direction
Tape Running Direction
Reel Dimensions [unit : mm]
G = 2G = 12.40 mm
I T F Co., Ltd.
102-901, Bucheon Technopark 364,
Samjeong-Dong, Ojeong-Gu, Bucheon-City,
Gyounggi-Do, Korea 421-809
Part No.
F2202
Rev. Date
2008/07/11
Rev.
NR8001-AS03
7/7