SAW Bandpass Filter 925.0 MHz Features RF bandpass filter No matching 50Ω single-ended operation Ceramic Surface Mounted Device Package ( 3.0 mm × 3.0 mm ) RoHS Compliant Package Dimensions 1 2 I 9251 3 6 6 1 5 5 2 4 4 3 Pin Configuration Dimensions shown are nominal in millimeters 2 Input Body : Al2O3 Ceramic Lid : Kovar, Ni Plated Terminations : Au plating 0.3 ~ 1.0 um, Over a 1.27 ~ 8.89 um Ni Plating 5 Output 1, 3, 4, 6 Case ground Maximum Ratings Parameter Unit Minimum Typical Maximum Operating Temperature Range ℃ -20 25 75 Storage Temperature Range ℃ -40 Power Handling Capability dBm - 85 - 10 Electrostatics Sensitive Device (ESD) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 1/7 SAW Bandpass Filter 925.0 MHz Specifications Fc = 925.0 MHz Minimum Typical Maximum Unit Center Frequency ( Fc ) - 925.0 - MHz Insertion Loss ( 922.0 ~ 928.0 MHz ) - 2.9 4.2 dB Ripple ( 922.0 ~ 928.0 MHz ) - 0.5 2.0 dB VSWR ( 922.0 ~ 928.0 MHz ) - 2.0 2.5 775.0 ~ 835.0 MHz 40 46 - 835.0 ~ 895.0 MHz 36 45 - 970.0 ~ 992.0 MHz 36 46 - 992.0 ~ 1075.0 MHz 38 44 - Attenuation Input/Output Impedance dB 50 Ohms Notes : 1) All specifications are based on the matching schematic shown below, measured by Agilent Network analyzer and full 2 port calibration. 2) Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 2/7 SAW Bandpass Filter 925.0 MHz Matching Schematic ( Actual matching values may vary due to PCB layout and parasitics ) Input 50Ω Output 50Ω Marking Configuration 1) I2) 9251 3) 1) Pad Number 1 Index 2) Manufacturer name 3) Marking Number * Ink or Laser Marking available I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 3/7 SAW Bandpass Filter 925.0 MHz Typical Performance ( at 25℃ ℃) I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 4/7 SAW Bandpass Filter 925.0 MHz Input / Output VSWR Input / Output Smith Charts I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 5/7 SAW Bandpass Filter 925.0 MHz Packing Specification 1. Reeling Quantity : 1000 pcs / reel, 3000 pcs / reel 2. Taping Structure : The tape shall be wound around the reel in the direction shown below. TOP COVER TAPE REEL CARRIER TAPE Tape Specification 1. Leader part and vacant position specification Vacant 150mm min. Component contained Vacant 150mm min. Leader part 250mm min. END START Tape Running Direction 2. Tensile strength of carrier tape 4.4N/mm width Direction of pull Top cover tape 3. Top cover tape adhesion 0~15 degree 1) pull off angle : 0~15° 2) speed : 300mm/min 3) force : 20~70g I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Carrier tape Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 6/7 SAW Bandpass Filter 925.0 MHz Carrier Tape Dimensions [unit : mm] A 3.40 ± 0.1 B 3.40 ± 0.1 C 7.25 ± 0.1 D 1.70 ± 0.1 E 12.00 ± 0.1 F 8.00 ± 0.1 Part Direction Tape Running Direction Reel Dimensions [unit : mm] I T F Co., Ltd. 102-901, Bucheon Technopark 364, Samjeong-Dong, Ojeong-Gu, Bucheon-City, Gyounggi-Do, Korea 421-809 Part No. F9251 Rev. Date 2012-11-29 Rev. NCNK02-AS01 7/7