L U M I N IS SYRIOS Wall mount W1290 Specification 1 2 3 4 All exposed cast aluminum components are made of non corrosive pure aluminum copper free (Aluminum is less than .1% copper content.#356 alloy.) 8 Finish: All polyester powder baked coatings preceded with a 5 baths preparation process. Meets military grade MIL-C781706 with a 2000 hours salt spray test. - Pulse rated porcelain socket or 75W/600V thermoplastic compact fluorescent socket. - One-piece molded silicone gasket with memory retention. - High power factor CWA ballast. Or 98% P.F.electronic smart ballast with end of life detection for compact fluorescent. - All stainless steel hardware. - All Moving and removable parts are sealed with a memory retention silicone gasket. 12345678- 5 6 #12 Ga, Galvanized wall pressure mounting plate. Cast aluminum ballast housing. Cast aluminum modular optical light chamber. up-light clear tempered glass. Flush mount installation to avoid accumulation of debris. Semi-specular aluminum reflector. Cast aluminum sealed lens frame Clear tempered lens. White translucent acrylic cylindrical diffuser. 7 Mounting 4 1/2” 9” 18” 9 1/2” 17” Lamps and wattage can be combined for up and down lighting. To specify the desired combination indicate the following suffix with the selected wattage code. Photometry 7” 4” 5 1/2” 90 -SU ( For up light + selected wattage) -SD ( For up light + selected wattage) Example: 60 -SUP100 (Up light) -SDM175 (Down light) Certification Max. weight: 40 lbs. Installation: Mounts over a standard 4” octagonal electrical box with 3 1/2” c/c mounting holes. (by others). Additional separate mounting holes are provided with wall plate.. Light source selection MH (ED17) 2M70 2M100 2M150 2M175 HPS (ED17) W1290 30 Mounting UL. Wet Location. Model# Separate updated technical specification sheets with related models and light sources with I.E.S formatted photometry are available on www.luminis.com. 2H70 2H100 2H150 CF (Gx24q) Single lamp F2142 F2157 CF (Gx24q) Two lamp 4F226 4F232 Voltage Finish 120 V Standard factory prewired (If no voltage is specified) For other voltages, please specify with catalog number. H.I.D. 208 V 240 V 277 V 347 V Compact fluorescent smart ballast 120/277 (Lamps by others) Please refer to page 128 for additional details. 347 V (To specify) (Refer to color chart) Standard selection WHT:Snow white BKT: Jet black BZT: Bronze GRT: Titanium gray DGT: Gun metal CHT: Champagne MST: Matte silver GNT: Forest green Optional colors CS: Custom color RAL: RAL# color Options L: SU: SD: EM42S: FS: PH1: PH2: QS: QRS: Accessories Set of 3 cast aluminum louver rings. Alternate up light source. (Please specify.) Alternate down light source. (Please specify) Electrical 1 lamp (26/32/42W) Fuse 120/277V photo cell. 347V photo cell. Standby lamp socket. H.I.D. lamp restrike EM optional battery test switch and pilot lamp are installed remotely. (See page 128) Luminaries may be altered for improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 125 Web: www.luminis.com Sept. 2006 Rev. Feb.2007 L U M I N IS SYRIOS Mounting attachments for W1222 Series 20 1/2” 36” 14” 23” 14 1/2” 28 1/2” 6” 21 1/2” 9 1/2” -S 15º swivel ceiling mount with 5/8” -W2 -1 1/2” Dia. shepherd -APA2 -1 1/2” Dia. -APS -1 1/2” Dia. dia.X36”lg. aluminum stem. Luminaire top adaptor allowing to cut stem to length on site.(Mounts over a standard 4" octagonal box with 3 1/2" C/C holes) aluminum arm wall mount, with a cast aluminum wall cover and galvanized steel mounting plate. shepherd aluminum side pole mount. (EPA:1.12) shepherd aluminum post top mount, with a cast aluminum tenon to fit with a 3 3/4” I.D. pole (EPA:1.17) 4 1/2” 29” 14” 15” 17 3/4” 14 1/2” Power supply 6 1/2” Power supply 29 3/4” -ACA2 -1” x 3” extruded -ACW2 -1” x 3” extruded -T2 -1” x 3” extruded -APC2 -1” x 3” extruded aluminum Davit arm pole mounting adaptor designed to fit with 4 to 5” dia. poles.1/2” dia.X 45º standard natural stainless steel rod support (EPA:1.58) aluminum Davit arm wall mounting adaptor with cast aluminum covers and galvanized steel mounting plates. 1/2” dia.X 45º standard natural stainless steel rod support. aluminum wall mounting straight adaptor with cast aluminum cover and galvanized steel mounting plate. aluminum side pole mounting straight adaptor (EPA:1.3) Compatible poles listing. Post side mount with APA2 attachment accessory Mounting style * Note: 36” extension with ACA2 attachment 24” extension with APA2 & APC2 attachment 4”O.D. PAA410-APA PAA412-APA PAA414-APA PAA416-APA PAA418-APA PAA420-APA 5”O.D. PAA510-APA PAA512-APA PAA514-APA PAA516-APA PAA518-APA PAA520-APA 4”O.D. PCA12-APA PCA14-APA PCA16-APA 4”O.D. PXD10-APA PXD12-APA PXD14-APA PXD16-APA PXD18-APA PXD20-APA Pole height 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with APC2 attachment accessory OAL pole height 12-14 or 16ft. PAA410-APC PAA412-APC PAA414-APC PAA416-APC PAA418-APC PAA420-APC Post top mount * Note 4” PXD pole style PCA pole style PCA pole style PAA510-APC PAA512-APC PAA514-APC PAA516-APC PAA518-APC PAA520-APC PCA12-APC PCA14-APC PCA16-APC PXD10-APC PXD12-APC PXD14-APC PXD16-APC PXD18-APC PXD20-APC 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with APS attachment accessory PAA pole style PAA410-A PAA412-A PAA414-A PAA416-A PAA418-A PAA420-A PAA510-A1 PAA512-A1 PAA514-A1 PAA516-A1 PAA518-A1 PAA520-A1 PCA10-A PCA12-A PCA14-A PCA16-A PXD10-A PXD12-A PXD14-A PXD16-A PXD18-A PXD20-A 10 ft 12 ft 14 ft 16 ft 18 ft 20 ft Post side mount with ACA2 attachment accessory 60” PAA414-ACA PAA416-ACA PAA418-ACA PAA420-ACA PAA514-ACA PAA516-ACA PAA518-ACA PAA520-ACA PCA14-ACA PCA16-ACA PXD14-ACA PXD16-ACA PXD18-ACA PXD20-ACA 14 ft 16 ft 18 ft 20 ft For poles details and specification, please refer to pages 140 to 144 LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 127 Web: www.luminis.com Sept. 2006 Rev. Feb.2007 L U M IN I S Slope ceiling adaptor Longer suspension stem Option: SW45 45º hang straight ball swivel for 5/8” dia. suspension stem. 45º hang straight ball swivel for 5/8” dia. suspension stem. with adaptor plate for W1250S SB45 Suspension power cord option for: W1250S 3/18 X 36”lg. power cord with adjustable aircraft cable. SPB Black power cable only with options EM42 EM242 QS STA60: STM80 STA80: 60” lg.X5/8” O.D. suspension stem. 80” lg. X5/8” O.D. suspension stem. For other factory cut to size length add suffix -STM with desired length to catalog# max.120” Stems can be cut on site and rethreaded externally (Tap size 1/4 IPS / 1/4-18) 3/18 Spiral power cord Max. 277V Standard extended length: 3ft. Not applicable when using options EM42 EM242 QS Safety suspension cable Overall length change: Option: STC Option: STM2 Safety aircraft suspension cable, for applications with earthquake regulations. Cables extends 18” beyond canopy. (Secured to building structure) Change total suspension length fro standard length. Specify desired length in inches. EX: STM2-72” STM2- Quartz lamp restrike Quartz lamp restrike Option: QRS STM60 Spiral suspension power cord Option: TCW (White) TCB (Black) Option: SPW (White) SPB (Black) Note: cable size and type may change at factory discretion upon availability, to accommodate required wiring with selected option. Option * STA Option: SB45 SW45 SYRIOS Optional accessories Quartz restrike standby lamp kit. When power failure is restored, it will energize temporary Quartz lamp with progressive dimming until full H.I.D light output is produced. max.100w DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. Option: QS EM42 wiring Emergency battery back-up EM42 / EM42S HOT EM Ballast wiring diagram for 120V factory connection. Note: Use of Emergency battery, requires periodic and regular testing to ensure correct operation. (please refer to manufacturer’s instructions. EM42S wiring BLK WHT One lamp: 26w: 450 Lmns.. 32w: 575 Lmns. 42w: 750 Lmns. Time: 90 Mnts -120/277V / T 0º C Quartz lamp socket for external 120V emergency power input. Separate 120V dedicated wiring is included. max.100 W DC bayonet type. (Lamp is not included.) Not Applicable with CFL lamps. WHT Note: AC ballast EM ballast Black/120V (Factory wired) Orange/277V (Cap unused lead.) COM For 57w & 70w: (Remote installation only) Consult factory EM42 option is supplied with integral test switch and pilot light. EM42S is supplied with additional wiring for external remotely installed test switch and pilot light. Single pole test switch (Breaking the connection) Luminaries may be altered for improvements or discontinued without prior notice. LUMINIS [ USA ] - 3555 NW 53rd Court, Fort Lauderdale, FL.33309 LUMINIS [ Canada ] - 87 C Brunswick D.D.O. Q.C. Canada H9B 2J5 Tel: 954 .717 .4155 Fax: 954 . 717.4157 Toll free: 888 .401 .6999 Page 128 Web: www.luminis.com Sept. 2006 JAN.2008