di-strip

SOCKET STRIPS
DI-STRIP®
Power Distribution Units
also for France, Switzerland, USA
7
SOCKET STRIPS
Socket Strips
DI-STRIP®
Strong points
7.3
DI-STRIP®
TriplePower
BladePower
PizzaPower
Classic
Compact
Protector
Cleaner
Safety Basic
Safety Standard
Master-Slave
Combi
GST18, 1-phase
GST18, 3-phase
7.6
7.8
7.9
7.9
7.10
7.11
7.13
7.14
7.15
7.16
7.17
7.18
7.19
DOS00291
DOS00317
DOS00312
DI-STRIP®
Euro Plug System
7.22
19’’
DI-STRIP®
7.25
For Switzerland
7.36
1 HU
DI-STRIP®
= 44.45 mm
For France
m
465 m
m
483 m
DI-STRIP®
USA
7.39
DOS00365
Remote PDU
DOS00721
7.40
Note
You will find more information on DI-STRIP®
at: www.knuerr-distrip.com
DOS00318
7.2
SOCKET STRIPS
DI-STRIP®
Strong points
1
Robust!
Plug field protected with raised
casing edges.
2
Stability
High stability and torisional
strength provided with closed
sheet steel casing.
3
DOS00366
4
DOS20131
Electrical safety
Full power to all connected consumers with full-length brass
busbar.
Shock hazard-proof and low contact resistance with double
spring contacts.
19” installation
Optimum use of space with 19”
installation:
- With low height, 1 HU
(44.45 mm)
- With 45° positioning of the
sockets
5
International compatibility
Numerous standard products in
accordance with international
standards. Special models on request.
6
Flexibility
Plenty of room for movement
with 2.5 m power supply cable.
Flexibility provided by standard
plug with dual earthing system.
DOS20134
DOS20142
7
Aesthetics
Appealing design with extruded
casing and design side panels in
visible area.
8
Cost-conscious
Quick and easy mounting on the
rack extrusion.
9
Universal
1 and 3-phase systems.
10
Modularity
Socket strip modules can be easily combined using plug-in connections.
11
Plug-in
Proven GST18 plug-in system for
connecting socket strip modules.
12
Certifications
Worldwide approvals and certifications are a quality feature.
DOS20134
DOS20144
DOS00317
7.3
SOCKET STRIPS
Standard DIN 49 440
DI-STRIP® Classic
Euro Plug
System
Page 7.9 / Page 7.41 / Page 7.42
- Socket spacing: 100 mm
- With/without switch
DOS00402
DI-STRIP® Compact
- Socket spacing: 50 mm
- With/without switch
Page 7.10 / Page 7.41
19’’
DOS00401
DI-STRIP® Protector
- User protection (FI)
- Circuit breaker (LS)
- User protection and circuit breaker (FI/LS)
- Equipment protection (BladePower/PizzaPower)
Page 7.11
Page 7.12
19’’
DOS00457
19’’
DOS00394
DI-STRIP® Protector Emergency STOP
- User protection / circuit breaker (FI/LS)
- With emergency stop switch
Page 7.22
Page 7.8
19’’
DOS20155a
19’’
DOS00455
DI-STRIP® Power Cleaner
- Mains filter (MF)
Page 7.13
19’’
DOS00400
®
DI-STRIP Safety Basic
Page 7.14
Page 7.19
DOS20108
19’’
Page 7.19
DI-STRIP® Safety Standard
- Overvoltage protection
DOS00397
DI-STRIP® Master Slave
- Automatic consumer switching
Page 7.16
DOS20110
19’’
DOS00396
®
DI-STRIP Combi
- Automatic consumer switching with overvoltage
protection and mains filter
Page 7.17
DOS00399
DI-STRIP® GST18
Compact/Master Slave/Safety Basic/Safety Standard/IEC320
- Without cable for GST18 plug-in system (Wieland)
Page 7.18
Page 7.19
DOS00679
DOS20112
GST18 accessories
Page 7.20
Remote PDU
Page 7.41
DOS80001
7.4
19’’
19’’
SOCKET STRIPS
UTE Standard
Swiss Standard
USA Standard
Page 7.25
Page 7.36
Page 7.39
DOS00402
DOS00717
DOS00685
Page 7.26
19’’
DOS00401
Page 7.27
19’’
DOS20074
19’’
DOS20065
Page 7.28
Page 7.37
Page 7.39
Three-Phase
System
19’’
DOS00686
Page 7.7
19’’
DOS20121
Page 7.38
Page 7.8
DOS00719
DOS20153a
19’’
DOS20059
Page 7.29
19’’
DOS00400
Page 7.30
19’’
DOS00397
Page 7.32
Page 7.38
DOS00720
19’’
Page 7.40
19’’
DOS00687
19’’
DOS00464
Page 7.33
DOS00399
Page 7.34
Page 7.20
DOS00463
DOS20103
7.5
SOCKET STRIPS
New: Three Phase DI-STRIP ®
®
TriplePower ®
The TriplePower ® name reflects the performance of our latest development. The DI-STRIP® TriplePower® supplies network racks with three times the normal power. This
requirement is generated by the increasingly greater packing densities and constantly rising energy requirements in
racks, which are often caused by aptly named “Blade
Servers” or 1 HU “Pizza Servers”, more than 40 of which
can be integrated into a Knürr Miracel rack.
The DI-STRIP® TriplePower® uses a classic 3-phase feed
with 3x16A, which it optimally distributes throughout the
whole rack. The 23 HU and 41 HU standard lengths cover
the entire rack height range of the Knürr Smaract2 and
Miracel rack families.
7.6
DOS20148
Note
You will find more information on TriplePower®
at: www.triple-power.com
DOS20149
At the maximum configuration level, up to 48 users
can be connected to a DIS T R I P ®Tr i p le Powe r ®
(Euro socket strip). Wit redundant feed, 96A can consequently be provided in a
19” rack with only two DIS T R I P ® Tr i p le Powe r ® .
SOCKET STRIPS
DI-STRIP® TriplePower®
Strong points
Cost-conscious
Quick and easy mounting on the
rack extrusion.
Costs reduction with regard to
mounting and wiring.
Feed
- 3x16A as standard
- Ideal for implementing
redundancies (e.g. 96 A)
1
DOS20131
3
DOS20126
4
DOS20129
At a glance
Phase assignment colour coding
(L1, L2, L3).
Installation
Optimum distribution over the
entire rack height
(standard: 23 HU and 41 HU).
Technical alternatives
- For 3-phase GST18 system
(see page 7.19).
2 DOS20147
DI-STRIP® TriplePower® Euro Plug-In System, IEC 320
With cable
DOS20126
- With 3-way Euro combinations of IEC 320
sockets in acc. with IEC 60320
- Cable: H05VV-F 5 G 2.5 mm2
- Cable: 2.5 m
(optional with IEC60309 plug, 3Ph/N/PE 6h)
- Easy mounting on the rack extrusion
- 3x16A feed as standard
- Ideal for implementing redundancies
(e.g. 96 A with redundant feed)
- Colour coding of the phase assignment
- Optimum distribution over the entire rack
height (23 HU and 41 HU)
- Alternative to 3-phase GST18 system
(see page 7.20)
Approvals/certificates
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
L
Dimensions in mm:
L = Length, S = Switch, n = Number of sockets,
F1 = Standard side piece, F2 = Design side piece,
19” = Suitable for 19” installation, Safe = Child-safe
HU = Standard height unit, UP = Unit of packaging
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
n
F1
1033
S
24
1833
48
1033
24
1833
48
•
•
•
•
F2
19“
Safe
Load rating
100-240/173-415 Vac
Input: 3x 16 A
Output: 10 A (NA 15 A)
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
Model
Order no.
UP
03.600.024.1
1 unit
03.600.048.1
1 unit
With plug
03.600.824.1
1 unit
With plug
03.600.848.1
1 unit
7.7
SOCKET STRIPS
New: Three Phase – DI-STRIP ®
®
BladePower ®
®
PizzaPower ®
A new generation of the power distribution units of the DISTRIP® range now ensures even more power: BladePower® and PizzaPower® for fail-safe power supply
distribution in network racks.
Increasingly greater packing densities and therefore constantly increasing energy requirements in server racks
caused by blade servers or 1 HU pizza servers will now be
handled electrically.
Up to 35 kW dissipated heat can be removed from modern
CoolTherm® server racks. But how is the necessary power
supplied into the rack, which can cause such power
losses?
The PDUs (3x32 A) optimally distribute the required power
over the entire rack, with connection of up to 21 consumers possible at the highest configuration level. 192 A
can be supplied to the rack with redundant feed.
DI-STRIP®
Strong points
Cost-conscious
Quick and easy installation on the
server rack’s extrusion.
Costs reduction with regard to
mounting and wiring.
Feed
- Single-phase 32 A and
three-phase 32 A
- ≤22 kVA
- Ideal for implementing
redundancies (e.g. 192 A)
Crystal clear assignment
Unmistakeable phase assignment
colour-coding (L1, L2, L3).
Installation
Optimum distribution of blade center and pizza server supply with
simple power distribution unit
(PDU) installation.
Availability
Prevention of “Single Point of
Failure” with individual fusing.
Certification
DI-STRIP® BladePower®
Technical data
- EC 320 sockets (10 A and 16 A).
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 5 G 4 mm2
- Cable: 4 m
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red
DOS20153
Load rating
100-240/173-415 Vac
Input: 1x32 A or 3x32 A
Output: 10 A / 16 A
Material / Finish
Casing: sheet steel, zinc-plated,
powder-coated
Dimensions
Height: approx. 60 mm
Casing width: 84 mm
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
Colour
Casing: RAL 9005 black
DOS20155
L
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.8
S
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova GS
- CSA NRTL/C
n
F1
19“
Plug
Model
Order no.
UP
375
5
•
03.630.005.1
1 unit
15
•
•
BladePower® PDU 1x 32 A
740
BladePower® PDU 3x 32 A
03.630.015.1
1 unit
375
5
BladePower® PDU 1x 32 A
03.630.805.1
1 unit
740
15
•
•
•
•
BladePower® PDU 3x 32 A
03.630.815.1
1 unit
•
Note
For more information on effective high density
power distribution see: www.blade-power.com
SOCKET STRIPS
DI-STRIP® PizzaPower®
Technical data
- IEC 320 sockets (10 A)
- Individually fused via thermal circuit breaker
that can be reset in acc. with IEC60934.
- Cable: H05VV-F 5 G 4 mm2
- Cable: 4 m
- With IEC60309 plug, 1Ph/N/PE 6h blue,
3Ph/N/PE 6h red
DOS20158
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova GS
- CSA NRTL/C
Load rating
100-240/173-415 Vac
Input: 1x32 A or 3x32 A
Output: 10 A
Material / Finish
Casing: sheet steel, zinc-plated,
powder-coated
Supply schedule
1 socket strip (PDU)
2 mounting brackets
1 19” mounting bracket
(additional with 19 installation option)
Operating instructions
Dimensions
Height: approx. 60 mm
Casing width: 84 mm
Height with cable: Approx. 176 mm
Colour
Casing: RAL 9005 black
DOS20159
L
n
F1
19“
Plug
Model
Order no.
UP
400
S
7
•
03.631.007.1
1 unit
21
•
•
PizzaPower® PDU 1x 32 A
933
PizzaPower® PDU 3x 32 A
03.631.021.1
1 unit
400
7
PizzaPower® PDU 1x 32 A
03.631.807.1
1 unit
933
21
•
•
•
•
PizzaPower® PDU 3x 32 A
03.631.821.1
1 unit
•
Note
For more information on effective high density
power distribution see: www.pizza-power.com
DI-STRIP® Classic
Standard DIN 49 440
- Optionally with lit switch,
2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
- Optionally with Euro plug, IEC320
for UPS applications
DOS00403
DOS00260
DOS00261
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
With switch
L
= Express item
Conversion: 1 mm = 0.03937 inch
n
F1
1783
17
1383
13
983
9
583
5
•
•
•
•
•
•
•
•
1733
1333
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
933
533
S
•
•
•
•
16
12
8
4
F2
19”
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Without switch
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Supply schedule
1 socket strip
2 mounting brackets
Safe
Model
Order no.
UP
03.300.067.x
1 unit
03.300.063.x
1 unit
03.300.059.x
1 unit
03.300.055.x
1 unit
With switch
03.302.066.x
1 unit
With switch
03.302.062.x
1 unit
With switch
03.302.058.x
1 unit
With switch
03.302.054.x
1 unit
7.9
SOCKET STRIPS
DI-STRIP® Compact
Standard DIN 49 440
DOS00401
DOS00262
With switch
With switch
DOS20020
Without switch
DOS20021
With switch
DOS00263
- Optionally with lit switch, 2-pole switching
- 19” installation option (with length 483 mm)
- 2 versions: Standard side panel or Design
side panel
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
- Optionally with Euro plug, IEC320
for UPS applications
Without switch
Load rating
100-240 Vac/16 A
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
L
n
F1
883
15
•
732
11
683
11
532
7
532
7
483
7
483
8
382
4
382
4
333
4
732
683
532
532
483
S
•
•
•
•
•
•
483
382
382
333
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.10
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
883
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
14
•
•
•
•
•
•
•
Order no.
UP
03.300.015.x
1 unit
03.300.111.x
1 unit
03.300.011.x
1 unit
03.301.107.x
1 unit
03.300.107.x
1 unit
03.300.007.x
1 unit
03.300.008.1
1 unit
03.301.104.x
1 unit
03.300.104.x
1 unit
03.300.004.x
1 unit
With switch
03.302.014.x
1 unit
With switch
03.302.110.x
1 unit
With switch
03.302.010.x
1 unit
With switch
03.303.106.x
1 unit
With switch
03.302.106.x
1 unit
With switch
03.302.006.x
1 unit
With switch
03.302.007.1
1 unit
With switch
03.303.103.x
1 unit
With switch
03.302.103.x
1 unit
With switch
03.302.003.x
1 unit
•
•
•
•
•
•
•
•
•
•
•
3
•
•
•
•
•
•
3
3
Model
•
•
•
6
7
Safe
•
6
6
19”
•
10
10
F2
•
SOCKET STRIPS
DI-STRIP® Protector FI
Standard DIN 49 440
DOS20065
DOS00264
Protector FI
RCCB for user protection
- Protection with indirect contact as error
protection by switching off with inadmissible high contact voltage through contact with electrical equipment
- Protection with direct contact as
back-up protection
- Residual operating current Ig = 10mA for
alternating and intermittent fault direct
current
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
With fault current circuit
breaker
With fault current circuit
breaker
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
n
F1
883
S
13
683
9
483
5
•
•
•
F2
19”
Safe
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
•
Order no.
UP
03.304.013.1
1 unit
03.304.009.1
1 unit
03.304.005.1
1 unit
DI-STRIP® Protector LS
Standard DIN 49 440
DOS00692
DOS00264
Protector circuit breaker
- Circuit breaker for overload and short
circuit
- Protects cables and feeds with rapid
switching off with short circuit and defined delayed cutoff with overload
- Circuit breaker: 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
With circuit breaker
With circuit breaker
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
L
n
F1
883
S
13
683
9
483
5
•
•
•
F2
19”
•
Safe
Model
Order no.
UP
03.308.013.1
1 unit
03.308.009.1
1 unit
03.308.005.1
1 unit
7.11
SOCKET STRIPS
DI-STRIP® Protector FI / LS
Standard DIN 49 440
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
directcurrent
- Circuit breaker 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS00693
DOS00264
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
n
F1
883
L
S
13
683
9
483
5
•
•
•
F2
19”
Safe
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
•
Order no.
UP
03.310.013.1
1 unit
03.310.009.1
1 unit
03.310.005.1
1 unit
DI-STRIP® Protector Emergency STOP
Standard DIN 49 440
DOS20059
Classic with
emergency stop switch
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- 19” installation option
(with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS00486
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Protector with
emergency stop switch
Dimensions
Socket spacing: Classic: 100 mm,
DOS00487
L
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
n
F1
683
S
10
483
6
•
•
1333
12
933
8
F2
19”
•
Safe
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
Compact
03.326.010.1
1 unit
Compact
03.326.006.1
1 unit
Classic
03.326.062.1
1 unit
Classic
03.326.058.1
1 unit
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.12
•
•
SOCKET STRIPS
DI-STRIP® Protector Emergency Stop FI / LS
Standard DIN 49 440
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS00456
DOS00488
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing:
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
L
S
683
n
F1
8
•
F2
19”
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Additional:
With 2-pole fault current switch and circuit breaker
Provides a combination of user, overload
and short circuit protection
Load rating
100-240Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
Safe
Model
Order no.
UP
03.328.008.1
1 unit
DI-STRIP® Power Cleaner
Standard DIN 49 440
- High-frequency glitches are generally caused
by switching processes in an operation from
100 kHz to 5MHz. This high-frequency rate
overloads the mains frequency and affects adjacent electronic equipment. The mains filter
attenuates this high-frequency rate.
- The attenuation behaviour is harmonized with
the typical interference spectrum.
- The mains filter works in both directions.
This means that glitches from the equipment to the socket strips are therefore also
kept away from the mains.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS20061
DOS00266
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Technical data
Nominal voltage: max. 250 Vac, 50 Hz
Nominal current: max. 16 A
Filter in acc. with VDE 0565-3
(EN 60939-1)
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
L
n
F1
883
S
13
683
9
483
5
•
•
•
F2
19”
•
Safe
Model
Order no.
UP
03.312.013.x
1 unit
03.312.009.x
1 unit
03.312.005.x
1 unit
7.13
SOCKET STRIPS
DI-STRIP® Safety Basic
Standard DIN 49 440
DOS20068
DOS00306
DOS00270
With overvoltage protection
With overvoltage protection
With overvoltage protection
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The
socket strip can then no longer be used.
Send the socket strip to the manufacturer for
the safety arrester to be replaced!
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and requirements categories 1 and 2 and B and C
must be preconnected in the building installation to ensure optimum protection.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.14
S
n
10
683
10
532
6
532
6
483
6
432
4
432
4
383
4
F1
F2
19”
Safe
•
•
•
•
•
•
•
•
•
•
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Test category: Type 3
- In acc. with DIN EN 61643-11
Feature class: D
- In acc. with VDE 0675-6
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
732
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
•
Model
Order no.
UP
03.316.110.1
1 unit
03.316.010.x
1 unit
03.317.106.1
1 unit
03.316.106.1
1 unit
03.316.006.x
1 unit
03.317.104.1
1 unit
03.316.104.1
1 unit
03.316.004.1
1 unit
SOCKET STRIPS
DI-STRIP® Safety Standard
Standard DIN 49 440
DOS20069
DOS00307
With overvoltage protection
and mains filter
With overvoltage protection
and mains filter
DOS00271
- The “Safety Standard” models consist of a
combined overvoltage protection/mains
filter element.
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The socket
strip can then no longer be used. Send the
socket strip to the manufacturer for the safety
arrester to be replaced!
- The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and requirements categories 1 and 2 and B and C
must be preconnected in the building installation to ensure optimum protection.
- High-frequency glitches are generally
caused by switching processes in an operation
from 100 kHz to 5MHz.
- This high-frequency rate overloads the
mains frequency and affects adjacent electronic equipment. The mains filter attenuates this high-frequency rate.
- The attenuation behaviour is harmonized with
the typical interference spectrum.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
S
n
F1
883
•
•
•
•
•
•
•
13
•
732
732
683
532
532
483
9
Safe
•
•
•
•
5
5
5
19”
•
•
9
9
F2
•
•
•
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Technical data
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Overvoltage protection
- Test category: Type 3
in acc. with DIN EN61643-11
- Feature class: D
- In acc. with VDE 0675-6
Mains filter
- In acc. with VDE 0565 (EN 60939)
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
With switch
03.318.013.x
1 unit
With switch
03.319.109.x
1 unit
With switch
03.318.109.x
1 unit
With switch
03.318.009.x
1 unit
With switch
03.319.105.x
1 unit
With switch
03.318.105.x
1 unit
With switch
03.318.005.x
1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.15
SOCKET STRIPS
DI-STRIP® Master-Slave
Standard DIN 49 440
DOS20070
DOS00268
With master-slave module
With master-slave module
- If the master equipment is switched, the
slave sockets are also switched (together,
with a short delay to the master). Enables
easy switching on and off of several difficult
to access pieces of equipment. Switching
thresholds can be set from outside via potentiometer.
- Note:
- Power consumption of the master equipment must be constantly over the switching-on threshold. When switching off the
master equipment, the power consumption
must fall below the switching-off threshold.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
n
F1
683
L
S
9
483
5
•
•
F2
19”
Safe
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number 1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
Max. 250 Vac/16 A
Technical data
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, supply status)
Off: 16 mA - 160 mA (approx. 44 mA, supply status)
Switching delay 550 ms ±/-20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
•
Order no.
UP
03.314.009.1
1 unit
03.314.005.1
1 unit
See also: The current
Telecom Special Catalogue!
Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.16
• Power supply systems
• Thermal management
SOCKET STRIPS
DI-STRIP® Combi
Standard DIN 49 440
DOS00325
With master-slave
overvoltage protection
and mains filter
- Master-slave with overvoltage protection
and mains filter
- Automatic consumer switching
- Combines functions of the Master-Slave
(page 7.16) and the Safety Standard
(page 7.15)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
DOS00272
DOS00273
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
With master-slave
overvoltage protection
and mains filter
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
L
S
n
782
9
733
9
582
5
582
5
533
5
F1
F2
19”
Safe
•
•
•
•
•
•
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Technical data
Overvoltage protection and mains filter:
Mains voltage: max. 250 Vac
Nominal current 16A
Feature class: D (refined protection in accordance with DIN VDE 0675)
Surge current resistance (8/20 μs wave):
max. 10 kA
Protection level (1.5/50 μs wave): ‹ 1500 V
(L/N against PE)
Master-slave function:
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, supply status)
Off: 16 mA - 160 mA (approx. 44 mA, supply status)
Switching delay 550 ms ±/- 20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
Model
Order no.
UP
03.320.109.1
1 unit
03.320.009.1
1 unit
03.321.105.1
1 unit
03.320.105.1
1 unit
03.320.005.1
1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.17
SOCKET STRIPS
DI-STRIP® GST18 Plug System (Wieland) Compact
Standard DIN 49 440
DOS20060
DOS00663
DOS20045
DOS20046
With switch
- Quick and efficient plug connection system
- Plug-in electro-installation in place of conventional wiring
- Speed:
- Due to simple plugging together of preconfigured elements
- Flexibility:
- Due to cable (cable length)
- Efficient:
- Easy exchange of socket strips, without cabling expenses
- Safety:
- Due to plug system, all faulty installations
are excluded
- Space-saving:
- Use of protection and switching functions
can be extended to additional socket strips
with no loss of plugging space by extending
cable (maximum load rating of 16 A)
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Without switch
L
S
n
F1
583
•
•
6
•
•
•
•
433
3
533
7
383
4
F2
19”
Safe
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
Model
Order no.
UP
With switch
03.302.206.1
1 unit
With switch
03.302.203.1
1 unit
03.300.207.1
1 unit
03.300.204.1
1 unit
DI-STRIP® Safety Basic
With GST18 plug system
- With overvoltage protection
- Technical description, see page 7.14
L
DOS20072
S
433
n
F1
F2
19”
Safe
Model
4
Order no.
UP
03.316.204.1
1 unit
DI-STRIP® Safety Standard
With GST18 plug system
- With overvoltage protection, with integrated
mains filter and lit switch
- Technical description, see page 7.15
DOS20073
L
S
583
n
F1
F2
19”
Safe
Model
5
Order no.
UP
03.318.205.1
1 unit
DI-STRIP® Master-Slave
With GST18 plug system
- Technical description, see page 7.16
L
DOS00464
7.18
533
S
n
5
F1
F2
19”
Safe
Model
Order no.
UP
03.314.205.1
1 unit
SOCKET STRIPS
DI-STRIP® Euro Socket System, IEC 320
With GST18 plug system
- With 3-way Euro combinations of IEC 320
sockets
- Without fuse protection
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS20112
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Input
DOS20107
L
S
383
DOS20106
n
F1
6
•
F2
19”
Safe
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
100-240 Vac/10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
03.600.206.1
1 unit
Output for
further cabling
DI-STRIP® Safety Basic Euro Socket System IEC 320
With GST18 plug system
- With overvoltage protection
- Technical description, see page 7.14
L
S
n
F1
F2
19”
Safe
Model
483
Order no.
UP
03.616.206.1
1 unit
DOS20110
DI-STRIP® Safety Standard
With GST18 plug system
- With overvoltage protection with integrated
mains filter
- Technical description, see page 7.15
L
DOS20109
S
483
n
F1
F2
19”
Safe
Model
6
Order no.
UP
03.618.206.1
1 unit
DI-STRIP® Power Cleaner
With GST18 plug system
- Technical description, see page 7.13
L
483
S
n
6
F1
F2
19”
Safe
Model
Order no.
UP
03.612.206.1
1 unit
DOS20108
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.19
SOCKET STRIPS
3-phase in rack with GST18
Strong points
DOS20147
DOS20132
DOS20142
DOS20135
1
Requirement
Constantly increasing energy requirements in the rack caused by
high packing densities (e.g. 1 HU
Pizza Servers, Blade Servers,
etc.)
2
Solution
3-phase distributor with GST18
plug system, e.g. 96 A and more
with redundant feed
3
Advantages
- Modularity
- Plug-in capability
(no wiring required)
- Expandability
- Cascadability
- Easy implementation of redundancies / UPS secured circuits
- Mix of, for example, DIN protected contacts /
IEC 320 Euro systems
- Installation position freely
selectable
- Good alternatives to 3-phase
DI-STRIP Triple Power
(see page 7.6)
Power Supply Cable, 3-Phase
Accessories for GST 18 plug system
- GST 18 socket for connecting GST18i5 distributor block with 3 phases
- 5-pole (L1, L2, L3, N, PE) 250/400 V ~
- Cable: HO5VV-F 5G 2.5 mm2
L
S
n
F1
F2
19”
Safe
Colour
Black
Model
2000
Order no.
UP
04.000.048.0
1 unit
DOS20104
GST18i5 Distributor Block, 3-Phase
- For individual, customer-side connection
- Modular plug-in connection
- Distribution of 3 phases on various sockets
- Including mounting panel
L
DOS20103
7.20
S
n
F1
F2
19”
Safe
Colour
Black
Model
Order no.
UP
04.000.038.9
1 unit
SOCKET STRIPS
Power Supply Cable, 1-Phase
Accessories for GST 18 plug system
- Mains plug CEE/VII - GST18 socket (Wieland)
- Cable, H05VV-F 3G 1.5 mm2
L
S
n
F1
F2
19”
Safe
Colour
White
Order no.
UP
2000
Model
04.000.040.0
1 unit
5000
04.000.041.0
1 unit
DOS00467
Connection Cable
Accessories for GST 18 plug system
- GST 18 plug
- GST 18 socket
- Cable, H05VV-F 3G 1.5 mm2
L
DOS00469
S
n
F1
F2
Colour
For colour coding circuits (e.g. UPS)
Model
Order no.
UP
200
19”
Safe
White
04.000.042.0
1 unit
200
Black
04.000.042.9
1 uni
500
White
04.000.037.0
1 unit
500
Black
04.000.037.9
1 unit
1000
White
04.000.044.0
1 unit
1000
Black
04.000.044.9
1 unit
5000
White
04.000.045.0
1 unit
DOS20105
GST18 Socket Part
- With screw terminal for cross-section
1.5-2.5 mm2 with cable strain relief
- For individual, customer-side connection
L
S
n
F1
F2
19”
Safe
Colour
White
Model
Order no.
UP
04.000.046.0
1 unit
DOS00471
GST18 Plug Part
- With screw terminal for cross-section
1.5-2.5 mm2 with cable strain relief
- For individual, customer-side additional
cabling
L
S
n
F1
F2
19”
Safe
Colour
White
Model
Order no.
UP
04.000.047.0
1 unit
DOS00470
7.21
SOCKET STRIPS
DI-STRIP® Euro Socket System, IEC 320
With cable and right angle plug
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
- Cable: H05VV-F 3G 1.5 mm2
- Cable: 2.5 m
- Moulded right angle plug, CEE7/VII
- Without fuse protection
DOS20062
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS00498
- Innova-GS
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
250 VAC/10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
DOS20042
L
S
n
F1
483
•
9
•
•
333
6
F2
19”
Safe
•
Model
Order no.
UP
With switch
03.602.009.1
1 unit
03.600.006.1
1 unit
DI-STRIP® Euro Socket System, IEC 320
Euro input in the plug field
- With fine-wire fuse 10A
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
DOS00458
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS20041
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
DOS20040
n
F1
383
6
483
9
•
•
6
•
433
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.22
Load rating
100-240 Vac
Input: max. 10 A
Output: max. 10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Without switch
L
Conversion: 1 mm = 0.03937 inch
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
With switch
- CSA NRTL/C
- CB-scheme
S
•
F2
19”
Safe
Model
•
With switch
Order no.
UP
03.622.006.1
1 unit
03.622.009.1
1 unit
03.624.006.1
1 unit
SOCKET STRIPS
DI-STRIP® Euro Socket System, IEC 320
Euro input on the side panel
- With fine-wire fuse 10A
- Optionally with lit switch, 2-pole switching
- 19” installation option
- With 3-way Euro combinations of IEC 320
sockets
DOS00460
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Load rating
100-240 Vac
Input: max. 10 A
Output: max. 10 A
Approval symbols for IEC 320 3-way Euro
combinations
VDE, UR, CSA
Supply schedule
1 socket strip
2 mounting brackets
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
DOS00461
DOS20043
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
With switch
L
n
F1
333
S
6
433
9
•
•
383
DOS20044
Without switch
483
•
•
6
9
F2
19”
Safe
•
•
Model
Order no.
UP
03.622.706.1
1 unit
03.622.709.1
1 unit
With switch
03.624.706.1
1 unit
With switch
03.624.709.1
1 unit
DI-STRIP® Euro Socket System, IEC 320
With cable and right angle plug
- With thermal overload protection, 10 A (can
be reset)
- With lit switch,
1-pole switching
- 19” installation option
- With 2 5-way Euro combinations of IEC 320
sockets
- Cable: H05VV-F 3G 2.5 mm2
- Cable: approx. 5 m
- Moulded right angle plug, CEE7/VII,
optional blue 16 A-6h (2P+PE) CEE17 plug
DOS20102
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 24 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Load rating
250 Vac/10 A
Approval symbols for IEC 320, 5-way
Euro combinations
UR, CSA, VDE
Supply schedule
1 Socket strip
2 Mounting brackets
2 19” Mounting brackets
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
L
S
n
F1
483
•
10
•
F2
19”
•
Safe
Model
Order no.
UP
With switch
03.632.010.1
1 unit
7.23
SOCKET STRIPS
Mains Cable for Euro Socket Strip
For DIN 49 440 and French/Belgian standard
- Mains plug CEE/VII - Euro socket
IEC 320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
L
DOS00076
Order no.
UP
2000
S
n
F1
F2
19”
Safe
Model
04.000.054.9
1 unit
6000
04.000.053.9
1 unit
Mains Cable for Euro Socket Strip
For Swiss standard
- Mains plug: Type12 - Euro socket IEC 320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
L
DOS00077
S
n
F1
F2
19”
Safe
Model
2000
Order no.
UP
04.000.055.9
1 unit
Mains Cable for Euro Socket Strip
For British standard
- Mains plug: type BS 1363 - Euro socket
IEC320
- Cable: HO5VV-F 3G 1 mm2
Mains voltage
250 VAC
Nominal current
10 A
L
DOS00078
S
n
F1
F2
19”
Safe
Model
2000
Order no.
UP
04.000.056.9
1 unit
Euro Connection Cable
- Mains plug: IEC 320 - Euro socket IEC 320
- Cable: HO5VV-F 3G 1 mm2
- USA: SJT AWG18 with USA approval
Mains voltage
250 VAC
Nominal current
10 A
L
DOS00519
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.24
Model
Order no.
UP
900
S
n
F1
F2
19”
Safe
EU
04.000.051.9
1 unit
900
USA
04.000.052.9
1 unit
SOCKET STRIPS
DI-STRIP® Classic
Standard CEE 7 V (UTE) / France
DOS20018
- Optionally with lit switch, 2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
DOS20019
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
L
n
F1
1783
17
1383
13
983
9
583
5
•
•
•
•
•
•
•
•
1733
1333
933
533
S
•
•
•
•
16
12
8
4
F2
19”
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
Safe
•
•
•
•
•
•
•
•
Model
Order no.
UP
03.400.067.x
1 unit
03.400.063.x
1 unit
03.400.059.x
1 unit
03.400.055.x
1 unit
With switch
03.402.066.x
1 unit
With switch
03.402.062.x
1 unit
With switch
03.402.058.x
1 unit
With switch
03.402.054.x
1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.25
SOCKET STRIPS
DI-STRIP®Compact
Standard CEE 7 V (UTE) / France
DOS20023
With switch
DOS20022
Without switch
DOS20025
DOS20024
- Optionally with lit switch, 2-pole switching
- 19” installation option
(with length 483 mm)
- 2 versions: Standard side panel or Design
side panel
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
With switch
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Without switch
n
F1
883
L
15
•
732
11
683
11
532
7
483
7
382
4
333
4
883
732
683
532
483
382
333
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.26
S
•
•
•
•
•
•
•
14
•
•
•
•
•
•
•
•
•
•
•
3
3
•
•
6
6
19”
•
10
10
F2
•
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Safe
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Model
Order no.
UP
03.400.015.x
1 unit
03.400.111.x
1 unit
03.400.011.x
1 unit
03.400.107.x
1 unit
03.400.007.x
1 unit
03.400.104.x
1 unit
03.400.004.x
1 unit
With switch
03.402.014.x
1 unit
With switch
03.402.110.x
1 unit
With switch
03.402.010.x
1 unit
With switch
03.402.106.x
1 unit
With switch
03.402.006.x
1 unit
With switch
03.402.103.x
1 unit
With switch
03.402.003.x
1 unit
SOCKET STRIPS
DI-STRIP® Protector FI
Standard CEE 7 V (UTE) / France
Protector FI
RCCB for user protection
- Protection with indirect contact as error
protection by switching off with inadmissible high contact voltage through contact with electrical equipment
- Protection with direct contact as
back-up protection
- Residual operating current Ig = 10mA for
alternating and intermittent fault direct
current
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS20026
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
S
883
n
F1
13
•
•
•
683
9
483
5
F2
19”
•
Safe
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Order no.
UP
❖
Model
03.404.013.1
1 unit
•
•
03.404.009.1
1 unit
03.404.005.1
1 unit
DI-STRIP® Protector LS
Standard CEE 7 V (UTE) / France
Protector circuit breaker
- Circuit breaker for overload and short
circuit
- Protects cables and feeds with rapid
switching off with short circuit and defined delayed cutoff with overload
- Circuit breaker: 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS20026
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
L
n
F1
883
S
13
683
9
483
5
•
•
•
F2
19”
Safe
•
•
•
•
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
03.408.013.1
1 unit
03.408.009.1
1 unit
03.408.005.1
1 unit
7.27
SOCKET STRIPS
DI-STRIP® Protector FI / LS
Standard CEE 7 V (UTE) / France
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
directcurrent
- Circuit breaker 16 A
- Tripping characteristic
type B, 2-pole
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS 20026
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
n
F1
883
L
S
13
683
9
483
5
•
•
•
F2
19”
Safe
•
•
•
•
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
03.410.013.1
1 unit
03.410.009.1
1 unit
03.410.005.1
1 unit
DI-STRIP® Protector Emergency STOP
Standard CEE 7 V (UTE) / France
DOS20027
DOS20028
Classic with
emergency stop
switch
Compact with
emergency stop
switch
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: Classic: 100 mm,
pact: 50 mm
L
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
n
F1
683
S
10
483
6
•
•
1333
12
933
8
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.28
•
•
F2
Com-
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
19”
Safe
Model
Order no.
UP
Compact
03.426.010.1
1 unit
•
•
•
Compact
03.426.006.1
1 unit
•
•
Classic
03.426.062.1
1 unit
Classic
03.426.058.1
1 unit
SOCKET STRIPS
DI-STRIP® Protector Emergency Stop FI / LS
Standard CEE 7 V (UTE) / France
DOS20029
With emergency Off switch
and FI-/ LS circuit breaker
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing:
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
L
S
683
n
F1
8
•
F2
19”
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Additional:
With 2-pole fault current switch and circuit breaker
Provides a combination of user, overload
and short circuit protection
Load rating
100-240Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
Safe
Model
•
Order no.
UP
03.428.008.1
1 unit
DI-STRIP® Power Cleaner
Standard CEE 7 V (UTE) / France
DOS20030
With mains filter
- High-frequency glitches are generally caused
by switching processes in an operation from
100 kHz to 5MHz. This high-frequency rate
overloads the mains frequency and affects adjacent electronic equipment. The mains filter
attenuates this high-frequency rate.
- The attenuation behaviour is harmonized with
the typical interference spectrum.
- The mains filter works in both directions.
This means that glitches from the equipment to the socket strips are therefore also
kept away from the mains.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number 0.6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
Nominal voltage: max. 250 Vac, 50 Hz
Nominal current: max. 16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
L
n
F1
883
S
13
683
9
483
5
•
•
•
F2
19”
Safe
•
•
•
•
Model
Order no.
UP
03.412.013.x
1 unit
03.412.009.x
1 unit
03.412.005.x
1 unit
7.29
SOCKET STRIPS
DI-STRIP® Safety Basic
Standard CEE 7 V (UTE) / France
DOS20031
DOS20032
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is separated.
- Once the safety arrester has been triggered
the green function display goes out. The
socket strip can then no longer be used.
Send the socket strip to the manufacturer
for the safety arrester to be replaced!
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and requirements categories 1 and 2 and B and C must be
preconnected in the building installation to
ensure optimum protection.
Technical data
Test category: Type 3
- In acc. with DIN EN 61643-11
Feature class: D
- In acc. with VDE 0675-6
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Colour
Final digit of order number .1:
RAL 7035 light-grey
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
L
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.30
S
n
732
10
683
10
532
6
483
6
432
4
383
4
F1
F2
19”
•
•
•
•
•
•
•
Safe
•
•
•
•
•
•
Model
Order no.
UP
03.416.110.1
1 unit
03.416.010.1
1 unit
03.416.106.1
1 unit
03.416.006.1
1 unit
03.416.104.1
1 unit
03.416.004.1
1 unit
SOCKET STRIPS
DI-STRIP® Safety Standard
Standard CEE 7 V (UTE) / France
DOS20033
DOS20034
With overvoltage protection
and mains filter
With overvoltage protection
and mains filter
- The “Safety Standard” models consist of a
combined overvoltage protection/filter element.
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is
separated.
- Once the safety arrester has been triggered
the green function display goes out. The socket
strip can then no longer be used. Send the
socket strip to the manufacturer for the safety
arrester to be replaced!
- The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and requirements categories 1 and 2 and B and C
must be preconnected in the building installation to ensure optimum protection.
- High-frequency glitches are generally
caused by switching processes in an operation
from 100 kHz to 5MHz.
- This high-frequency rate overloads the
mains frequency and affects adjacent electronic equipment. The mains filter attenuates this high-frequency rate.
- The attenuation behaviour is harmonized with
the typical interference spectrum.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
S
n
F1
883
•
•
•
•
•
13
•
732
683
532
483
5
Technical data
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 μs): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Overvoltage protection
Feature class: D
- In acc. with VDE 0675-6
Mains filter
- In acc. with VDE 0565 (EN 60939)
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
With switch
03.418.013.x
1 unit
With switch
03.418.109.x
1 unit
With switch
03.418.009.x
1 unit
With switch
03.418.105.x
1 unit
•
•
•
•
•
•
With switch
03.418.005.x
1 unit
•
•
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Safe
•
5
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
19”
•
9
9
F2
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.31
SOCKET STRIPS
DI-STRIP® Master-Slave
Standard CEE 7 V (UTE) / France
DOS20035
With master-slave module
- If the master equipment is switched, the
slave sockets are also switched (together,
with a short delay to the master). Enables
easy switching on and off of several difficult
to access pieces of equipment. Switching
thresholds can be set from outside via potentiometer.
- Note:
- Power consumption of the master equipment must be constantly over the switching-on threshold. When switching off the
master equipment, the power consumption
must fall below the switching-off threshold.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: HO5VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
n
F1
683
L
S
9
483
5
•
•
F2
19”
Safe
•
•
•
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number 1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
Max. 250 Vac/16 A
Technical data
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, supply status)
Off: 16 mA - 160 mA (approx. 44 mA, supply status)
Switching delay 550 ms ±/-20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
Order no.
UP
03.414.009.1
1 unit
03.414.005.1
1 unit
See also: The current
Telecom Special Catalogue!
Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
• Power supply systems
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.32
• Thermal management
SOCKET STRIPS
DI-STRIP® Combi
Standard CEE 7 V (UTE) / France
DOS20037
DOS20036
With master-slave,
overvoltage protection
and mains filter
- Master-slave with overvoltage protection
and mains filter
- Automatic consumer switching
- Combines functions of the master-slave
(page 7.32) and the safety standard
(page 7.31)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
With master-slave,
overvoltage protection
and mains filter
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
L
S
n
782
9
733
9
582
5
533
5
F1
F2
•
•
•
•
19”
Safe
•
•
•
•
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Technical data
Overvoltage protection and mains filter:
Mains voltage: max. 250 Vac
Nominal current 16A
Feature class: D (refined protection in accordance with DIN VDE 0675)
Surge current resistance (8/20 μs wave):
max. 10 kA
Protection level (1.5/50 μs wave): ‹ 1500 V
(L/N against PE)
Master-slave function:
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, supply status)
Off: 16 mA - 160 mA (approx. 44 mA, supply status)
Switching delay 550 ms ±/- 20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
Model
Order no.
UP
03.420.109.1
1 unit
03.420.009.1
1 unit
03.420.105.1
1 unit
03.420.005.1
1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.33
SOCKET STRIPS
DI-STRIP® Compact GST 18 Plug System (Wieland)
Standard CEE 7 V (UTE) / France
DOS20048
DOS20047
GST 18 with switch
GST 18 without switch
- Quick and efficient plug connection system
- Plug-in electro-installation in place of conventional wiring
- Speed:
- Due to simple plugging together of preconfigured elements
- Flexibility:
- Due to cable (cable length)
- Efficient:
- Easy exchange of socket strips, without cabling expenses
- Safety:
- Due to plug system, all faulty installations
are excluded
- Space-saving:
- Use of protection and switching functions
can be extended to additional socket strips
with no loss of plugging space by extending
cable (maximum load rating of 16 A)
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
L
S
n
F1
583
•
•
6
•
•
•
•
433
3
533
7
383
4
F2
19”
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
Safe
Model
Order no.
UP
•
•
•
•
With switch
03.402.206.1
1 unit
With switch
03.402.203.1
1 unit
03.400.207.1
1 unit
03.400.204.1
1 unit
DI-STRIP® Safety Basic
With GST 18 plug system / France
DOS20051
- With overvoltage protection
- Technical description, see page 7.30
L
S
433
n
F1
F2
19”
Safe
Model
•
4
Order no.
UP
03.416.204.1
1 unit
DI-STRIP® Safety Standard
With GST18 plug system
DOS20052
- With overvoltage protection, with integrated
mains filter and lit switch
- Technical description, see page 7.31
L
S
583
n
F1
F2
19”
Safe
Model
•
5
Order no.
UP
03.418.205.1
1 unit
DI-STRIP® Master Slave
With GST18 plug system
DOS20054
- Technical description, see page 7.32
L
533
7.34
S
n
5
F1
F2
19”
Safe
•
Model
Order no.
UP
03.414.205.1
1 unit
SOCKET STRIPS
Power Supply Cable
For GST18 plug system
- Mains plug CEE/VII - GST18 socket (Wieland)
- Cable: HO5VV-F 3G 1.5 mm2
L
S
n
F1
F2
19”
Safe
Colour
White
Order no.
UP
2000
Model
04.000.040.0
1 unit
5000
04.000.041.0
1 unit
DOS00467
Connection Cable
For GST18 plug system
- GST18 plug - GST 18 socket
- Cable: HO5VV-F 3G 1.5 mm2
L
S
n
F1
F2
Colour
White
Order no.
UP
1000
19”
Safe
Model
04.000.044.0
1 unit
5000
04.000.045.0
1 unit
DOS00469
GST18 Socket Part
Input
- With screw terminal for cross-section
1.5-2.5 mm2 with cable strain relief
- For individual, customer-side connection
L
S
n
F1
F2
19”
Safe
Colour
White
Model
Order no.
UP
04.000.046.0
1 unit
DOS00471
GST18 Plug Part
Output
- With screw terminal for cross-section 1.52.5 mm2 with cable strain relief
- For individual, customer-side additional cabling
L
S
n
F1
F2
19”
Safe
Colour
White
Model
Order no.
UP
04.000.047.0
1 unit
DOS00470
For more GST18 accessories see page 7.20
7.35
SOCKET STRIPS
DI-STRIP® Classic
Standard CH SEV 1011
- With/without switch, socket spacing, 100
mm
- Optionally with lit switch, 2-pole switching
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
DOS00717
DOS00664
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Classic with switch
Classic without switch
n
F1
1783
L
17
1383
13
983
9
583
5
•
•
•
•
•
•
•
•
1733
1333
933
533
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.36
S
•
•
•
•
16
12
8
4
F2
19”
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number .6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/10 A
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
DOS00665
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Supply schedule
1 socket strip
2 mounting brackets
Safe
Model
Order no.
UP
03.700.067.x
1 unit
03.700.063.x
1 unit
03.700.059.x
1 unit
03.700.055.x
1 unit
With switch
03.702.066.x
1 unit
With switch
03.702.062.x
1 unit
With switch
03.702.058.x
1 unit
With switch
03.702.054.x
1 unit
SOCKET STRIPS
DI-STRIP®Compact
Standard CH SEV 1011
- Optionally with lit switch, 2-pole switching
- 19” installation option (with length 483 mm)
- 2 Versions, standard side or design side
- Socket rotation: 45º
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
DOS20074
DOS00666
DOS20038
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
L
DOS20039
DOS00667
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
n
F1
883
15
•
732
11
683
11
532
7
483
7
382
4
333
4
732
683
532
483
382
333
S
•
•
•
•
•
•
Model
Order no.
UP
03.700.015.1
1 unit
03.700.111.1
1 unit
03.700.011.1
1 unit
03.700.107.1
1 unit
03.700.007.1
1 unit
03.700.104.1
1 unit
03.700.004.1
1 unit
With switch
03.702.110.1
1 unit
With switch
03.702.010.1
1 unit
With switch
03.702.106.1
1 unit
With switch
03.702.006.1
1 unit
With switch
03.702.103.1
1 unit
With switch
03.702.003.1
1 unit
•
•
•
•
•
•
•
•
•
•
•
3
3
Safe
•
6
6
19”
•
10
10
F2
Load rating
100-240 Vac/10 A
•
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.37
SOCKET STRIPS
DI-STRIP® Protector FI/LS
Standard CH SEV 1011
Protector FI / LS
- RCCB and circuit breaker
- Provides a combination of user, overload
and short circuit protection
- Residual operating current Ig = 30 mA
for alternating and intermittent fault
directcurrent
- Circuit breaker 10 A
- Tripping characteristic type B, 2-pole
DOS00719
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded right angle plug
DOS00668
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
n
F1
683
L
S
9
483
5
•
•
F2
19”
Safe
Dimensions
Socket spacing: 50 mm
Height: 78 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
100-240 Vac/10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
Model
•
Order no.
UP
03.710.009.1
1 unit
03.710.005.1
1 unit
DI-STRIP® Safety Standard
Standard CH SEV 1011
- With overvoltage protection and integrated
mains filter
- With lit switch,
2-pole switching
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm2
- Moulded plug
DOS00720
DOS00669
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
With overvoltage protection and mains filter
L
S
n
F1
•
•
9
•
•
483
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.38
5
F2
19”
•
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Description and technical data
(See page 7.15)
Nominal current 10 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” Mounting brackets (additional with
19” installation option)
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 mm
683
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Safe
Model
Order no.
UP
With switch
03.718.009.1
1 unit
With switch
03.718.005.1
1 unit
SOCKET STRIPS
DI-STRIP® Classic
Standard USA NEMA5-15R
- With lit switch
- With overload protection 15A
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
DOS00685
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS00670
Dimensions
Socket spacing: 100 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 5 m
With switch
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Load rating
125 Vac/15 A
Supply schedule
1 socket strip
2 mounting brackets
L
S
n
F1
1383
•
12
•
F2
19”
Safe
Model
Order no.
UP
With switch
03.532.062.1
1 unit
DI-STRIP®Compact
Standard USA NEMA5-15R
- With lit switch
- With overload protection 15A
- 19” installation option (with length 483 mm)
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
DOS00686
Material / Finish
Casing: closed sheet-steel extrusion,
sheet steel, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
DOS20016
With switch
Dimensions
Socket spacing: 32 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Load rating
125 Vac/15 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
L
S
n
F1
483
•
•
9
•
•
383
6
F2
19”
•
Safe
Model
Order no.
UP
With switch
03.532.009.1
1 unit
With switch
03.532.006.1
1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.39
SOCKET STRIPS
DI-STRIP® Surge Protector
Standard USA NEMA5-15R
- With light switch
- With overload protection 15A
- With overvoltage protection
- 19” installation option
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
DOS00687
DOS20017
- Innova-GS
- CSA NRTL/C
- CB-scheme
Material / Finish
Casing: closed sheet steel extrusion, zincplated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
With overvoltage protection
Dimensions
Socket spacing: 32 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
L
S
n
F1
483
•
6
•
F2
19”
Safe
•
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Technical data
Mains voltage, 125 Vac
Nominal current 15 A
Surge current resistance (8/20 μs wave):
max. 8 kA
Protection level: ‹ 800 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting bracket
Model
Order no.
UP
With switch
03.534.006.1
1 unit
Remote PDU, IEC 320
Feed, 16/32 A
IP Ready
• Web Interface
• IPMI 2.0 Interface
• SMASH CLI Interface
• SNMP alarm signalling and SNMP MIB
• Controls with the Raritan Command
Center Secure Gateway
DOS80002
Supervision and control
• All outputs can be controlled remote and
local
• Power, current, voltage
• RMS power and RMS current
• “History” safety function
• Modern fuse systems
• Alarm and trap signals to
different destinations
• AES 256 hardware
• User authentication via LDAP, MSAD,
CCSG
• SSH CLI
Monitoring
• Internal temperature sensor
• “Feature bus” (RS 485 + single wire)
for external sensors
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch
1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
7.40
Power metering
• Max. load rating: 30A, 7200 W
• Available measured variables per
out put:
- Average power consumption
- Real power effective value
- Voltage effective value
- Current effective value
- Apparent power
• The maximum actual value present is
saved and can be also be deleted
• All measurement results can be retrieved
via IPMI, SNMP, DES SMASH CLI or HTML
interface
• HTML interface for visualising data
history
Power control
• Each connection can be controlled
separately
• Programmable switch-on delay:
User-definable
• Outputs can be programmed in
virtual groups
• Groups can be defined and real
connections can be assigned
to groups
• All outputs can communicate with IPMI,
SNMP, SMASH CLI and HTML interface
protocols
• 2 fuses per output and group
• Adjustable tripping current
SOCKET STRIPS
Alarm signalling
• Limit values for current and voltage can
be freely set
• Alarm signalling via e-mail (SMS),
SNMP trap
• Critical values are displayed red in the
browser window
• Alarm states
• Fuse tripping
• Alarm with an internal temperature of
80°C; automatic alarm switch-off when
the temp. goes back below 70°C
• Alarm when set current and voltage limit
values are reached
• Display of total power of the connected
devices and the effective power con
sumption
• Status display of fuses
• Connection option for sensors
- Temperature/air humidity
- Digital sensors
DOS80002
Housing / Connections
• All 0 HU, 1 and 2 HU models have:
LED displays
• Can switch between different outputs
• Show the current power consumption
• Status display of fuses
• Serial RJ 11
• SMASH CLI (IPMI profile)
• RJ 45 Ethernet 10/100
• All IP-based connections
• Links status and 10/100 status per LED
• Feature connector
• RS 485 interface
• 1 wire bus
• Connection for external sensors
• Beeper for acoustic signal
(release of circuit breaker)
LEDs control
• Off = unit is not connected to power,
control circuitry’s power supply is
defective, LED is defective
• Red = ON (relay closed) and LIVE
(voltage present)
• Red flashing = ON and LIVE, but there is
overload, current has crossed critical
threshold
• Green = OFF (relay open) and LIVE
• Yellow flashing = ON but NOT LIVE
(circuit breaker open, or other high
voltage rail error)
• Green flashing = OFF but NOT LIVE
Standards
• Linux Core (2.6)
• Standard Security Architecture
• Independent authentication
• Authentication on LDAP, MSAD, NDS
• Server-side certificates
• User rights per outlet
• SSL encryption
• Standard Interfaces
• Web-based access
• IPMI, IPMI clients with LAN-channel
support
• SMASH CLI (serial, LAN)
• WS MAN (1Q 2007)
• Baytech SNMP over serial
• Standard protocols
• IP v4, IP v6 (from Q2 2007)
• SNMP
DOS80002
Model
DPCS
12A-16 Remote PDU
HU
Model
V/A
Plug
Order no.
UP
0
12x IEC320 C13
230V/16A
IEC60309 16A
06.005.281.1
1 unit
DPCS
20A-16 Remote PDU
0
20x IEC320 C13
230V/16A
IEC60309 16A
06.005.282.1
1 unit
DPCS
20A-32 Remote PDU
0
20x IEC320 C13
230V/32A
IEC60309 32A
06.005.283.1
1 unit
DPCR
8A-16 Remote PDU
1
8x IEC320 C13
230V/16A
IEC60309 16A
06.005.284.1
1 unit
DPCR 2x 8A-16 Remote PDU
2
2x 8 IEC320 C13
230V/16A
IEC60309 16A
06.005.285.1
1 unit
DPCR
20A-16 Remote PDU
2
20x IEC320 C13
230V/16A
IEC60309 16A
06.005.286.1
1 unit
DPCR
20A-32 Remote PDU
2
20x IEC320 C13
230V/32A
IEC60309 32A
06.005.287.1
1 unit
7.41