B-XES&F-XES&H-XES Series Isolated 2W Single Output DC/DC Converters SELECTION GUIDE Input Voltage (V) Output Voltage (V) Output Current max(MA) Capacitive load,max (μF) Efficiency Order code B0503XES-2W 4.5-5.5 3.3 600 470 64 B0505XES-2W 4.5-5.5 5 400 470 66 B0507XES-2W 4.5-5.5 7.2 278 470 64 B0509XES-2W 4.5-5.5 9 222 470 66 B0512XES-2W 4.5-5.5 12 167 470 70 B0515XES-2W 4.5-5.5 15 134 470 70 B0518XES-2W 4.5-5.5 18 111 470 67 B0524XES-2W 4.5-5.5 24 83 470 68 ◆High efficiency up to 70% B1203XES-2W 10.8-13.2 3.3 600 470 64 B1205XES-2W 10.8-13.2 5 400 470 66 ◆Operating temperature -40℃ to+85℃ B1207XES-2W 10.8-13.2 7.2 278 470 63 B1209XES-2W 10.8-13.2 9 222 470 66 B1212XES-2W 10.8-13.2 12 167 470 70 B1215XES-2W 10.8-13.2 15 134 470 70 B1218XES-2W 10.8-13.2 18 111 470 66 B1224XES-2W 10.8-13.2 24 83 470 68 B2403XES-2W 21.6-26.4 3.3 600 470 54 B2405XES-2W 21.6-26.4 5 400 470 64 B2407XES-2W 21.6-26.4 7.2 278 470 63 B2409XES-2W 21.6-26.4 9 222 470 64 B2412XES-2W 21.6-26.4 12 167 470 68 B2415XES-2W 21.6-26.4 15 134 470 68 B2418XES-2W 21.6-26.4 18 111 470 68 B2424XES-2W 21.6-26.4 24 83 470 70 FEATURES ◆RoHS compliant ◆12 Pin SIP Package ◆Low ripple and noise ◆Input/Output Isolation 1000 , 3000 or 6000VDC ◆Pin compatible with multiple manufacturers MODEL SELECTION B①24②05③X④ ES⑤-2W⑥ ①Product Series ③Output Voltage ⑤EXTEND SIP ②Input Voltage ④Fixed Input ⑥Rated Power APPLICATIONS (%) Input/Output Isolation 3000VDC 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Microdc; refer to www.microdc.cn for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%,nominal input voltage and at rated output load unless otherwise specified. 5. Microdc may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Microdc’s sandard Terms of Sale available at www.microdc.cn. F0503XES-2W 4.5-5.5 3.3 600 470 64 F0505XES-2W 4.5-5.5 5 400 470 66 F0507XES-2W 4.5-5.5 7.2 278 470 64 F0509XES-2W 4.5-5.5 9 222 470 66 F0512XES-2W 4.5-5.5 12 167 470 70 F0515XES-2W 4.5-5.5 15 134 470 70 F0518XES-2W 4.5-5.5 18 111 470 67 F0524XES-2W 4.5-5.5 24 83 470 68 F1203XES-2W 10.8-13.2 3.3 600 470 64 F1205XES-2W 10.8-13.2 5 400 470 66 F1207XES-2W 10.8-13.2 7.2 278 470 63 F1209XES-2W 10.8-13.2 9 222 470 66 F1212XES-2W 10.8-13.2 12 167 470 70 F1215XES-2W 10.8-13.2 15 134 470 70 F1218XES-2W 10.8-13.2 18 111 470 66 F1224XES-2W 10.8-13.2 24 83 470 68 F2403XES-2W 21.6-26.4 3.3 600 470 64 F2405XES-2W 21.6-26.4 5 400 470 64 F2407XES-2W 21.6-26.4 7.2 278 470 63 F2409XES-2W 21.6-26.4 9 222 470 64 F2412XES-2W 21.6-26.4 12 167 470 68 F2415XES-2W 21.6-26.4 15 134 470 68 F2418XES-2W 21.6-26.4 18 111 470 68 F2424XES-2W 21.6-26.4 24 83 470 70 VDC Input/Output Isolation 6000 6000VDC MICRODC reserves the copyright http://www.microdc.cn H0503XES-2W 4.5-5.5 3.3 600 470 53 H0505XES-2W 4.5-5.5 5 400 470 66 H0507XES-2W 4.5-5.5 7.2 278 470 64 H0509XES-2W 4.5-5.5 9 222 470 66 Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 B-XES&F-XES&H-XES Series SELECTION GUIDE Order code Input Voltage (V) Output Voltage (V) Output Current max(MA) Capacitive load,max (μF) Efficiency (%) H0512XES-2W 4.5-5.5 12 167 470 70 H0515XES-2W 4.5-5.5 15 134 470 70 H0518XES-2W 4.5-5.5 18 111 470 67 H0524XES-2W 4.5-5.5 24 83 470 68 H1203XES-2W 10.8-13.2 3.3 600 470 53 H1205XES-2W 10.8-13.2 5 400 470 66 H1207XES-2W 10.8-13.2 7.2 278 470 63 H1209XES-2W 10.8-13.2 9 222 470 66 H1212XES-2W 10.8-13.2 12 167 470 70 H1215XES-2W 10.8-13.2 15 134 470 70 H1218XES-2W 10.8-13.2 18 111 470 66 H1224XES-2W 10.8-13.2 24 83 470 68 H2403XES-2W 21.6-26.4 3.3 600 470 54 H2405XES-2W 21.6-26.4 5 400 470 64 H2407XES-2W 21.6-26.4 7.2 278 470 63 H2409XES-2W 21.6-26.4 9 222 470 64 H2412XES-2W 21.6-26.4 12 167 470 68 H2415XES-2W 21.6-26.4 15 134 470 68 H2418XES-2W 21.6-26.4 18 111 470 68 H2424XES-2W 21.6-26.4 24 83 470 70 Input Specifications Parameters Nominal Typical 5 4.5-5.5 12 10.8-13.2 24 21.6-25.4 Voltage range Filter Maximum Units VDC Capacitor Turn on Transient process time 100 Start up time 300 Absolute Maximum Rating 5 Vin 0-7 12 Vin 0-15 24 Vin 0-28 Peak Input Voltage time ms ms VDC 100 ms Isolation Specifications Parameters Conditions Tested I/O voltage 3 sec Typical Rated 1000, 3000 or 6000 Units VDC Resistance > 1000 MOhm Capacitance 60 pF http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 B-XES&F-XES&H-XES Series Output Specifications Parameters Conditions Typical Voltage accuracy Maximum ±2 Units % Short Circuit protection Continuous Short Circuit restart Auto-recovery Line voltage regulation (Single) Load voltage regulation (Single) Load voltage regulation (Single) ±0.5 % Load 0 – 100% ±0.5 % Load 0 – 100% ±1.5 % ±0.02 %/℃ 75 mV p-p 150 ms 3.3V output model Temperature coefficient At 20MHz Ripple & Noise Bandwidth Rising time General Specifications Parameters Conditions Typical Switching frequency 100% load 50 Operating temperature Full Load without Derating Maximum KHz Storage temperature -40 to +85 ℃ -40 to +125 ℃ Max Case temperature ℃ 90 Cooling Free air convection Humidity % 90 Case material Units % Plastic UL94-VO Weight 3.8 g Dimensions (L x W x H) 1.25 x 0.34 x 0.53 inches MTBF >1 500 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25 C) 31.80 x 8.60 x 13.47 mm NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltageand at rated output load unless otherwise specified Pin Out Specifications Pin 1000VDC 3000 and 6000VDC 1 +V Input +V Input 2 N.C. -V Input 3 N.C. N.C. 9 N.C. N.C. 10 -V Output -V Output 11 +V Output +V Output 12 -V Input N.C. RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3