WRA-ZD-5W&WRB-ZD-5W Series 5W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC DC--DC CONVERTER Models Input voltage Order code Output current Output voltage range * FEATURES ◆Ultra wide 4:1 Input Range 9–36VDC or 18–75VDC ◆Full SMD-Design ◆High Efficiency up to 85% ◆Indefinite Short-Circuit Protection Efficiency typ. max. WRB2403ZD-5W 9 – 36VDC 3.3VDC 1167mA 77% WRB2405ZD-5W 9 – 36VDC 5VDC 810mA 81% WRB2412ZD-5W 9 – 36VDC 12VDC 346mA 83% WRB2415ZD-5W 9 – 36VDC 15VDC 277mA 83% WRA2405ZD-5W 9 – 36VDC ±5VDC ±400mA 80% WRA2412ZD-5W 9 – 36VDC ±12VDC ±173mA 83% WRA2415ZD-5W 9 – 36VDC ±15VDC ±138mA 83% WRB4803ZD-5W 18 – 75VDC 3.3VDC 1182mA 78% ◆Reverse Voltage Protection WRB4805ZD-5W 18 – 75VDC 5VDC 820mA 82% ◆I / O-isolation 1500 VDC WRB4812ZD-5W 18 – 75VDC 12VDC 354mA 85% WRB4815ZD-5W 18 – 75VDC 15VDC 283mA 85% WRA4805ZD-5W 18 – 75VDC ±5VDC ±410mA 82% WRA4812ZD-5W 18 – 75VDC ±12VDC ±177mA 85% WRA4815ZD-5W 18 – 75VDC ±15VDC ±142mA 85% ◆Input Filter meets EN 55022, Class A and FCC, Level A without external Components ◆Shielded Metal Case with insulated Baseplate *Input voltage can’t exceed this value,or will cause the permanent damage. ◆24-pin DIP with industry Standard Pin out ◆MTBF >1 Mio. H ◆2 Year Product Warranty MODEL SELECTION WRB①24②12③Z④ D⑤-5W⑥ ①Product Series ②Input Voltage ③Output Voltage ④Wide (4:1) Input Range ⑤DIP24 Package Style ⑥ Rated Power Physical Specifications Case material Steel chrome-nickel plated Baseplate Epoxy Potting material Silicon rubber TSE (flammability to UL 94V-0) Weight 14 g (0.55 oz) Soldering temperature max. 260 °C / 10 sec APPLICATIONS The WRA(B)-ZD-5W series DC/DC converter is designed for applications requiring very wide operating voltage range. Typical applications are tele- and data communication systems, mobile battery powered equipments and industrial process control systems with operation from different input voltages i.e. 12/24 VDC or 24/48 VDC battery voltages. High efficiency allows operation up to 75°C without derating. Input filtering according EN 55022-A and FCC, level A. Low output ripple minimise design-in time and cost. MICRODC reserves the copyright http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 3 WRA-ZD-5W&WRB-ZD-5W Series Input Specifications 20 mA / 400 mA typ. (at 12 VDC Vin) 24 Vin models 20 mA / 200 mA typ. (at 24 VDC Vin) Input current no load /full load 6 mA / 200 mA typ. (at 24 VDC Vin) 48 Vin models 6 mA / 100 mA typ. (at 48 VDC Vin) 24 Vin models 8.5 VDC /8.0 VDC typ. 48 Vin models 17 VDC /16 24 Vin models 50 V max. 48 Vin models 100 V max. Start-up voltage / under voltage shut down VDC typ. Surge voltage (1 sec. max.) Reverse voltage protection 1.0 A max. Conducted noise EN 55022 level A, FCC part 15, level A (input) Output Specifications Voltage set accuracy ±1% – Input variation Vin min. to Vin max. ± 0.3 % max. – Load variation 10 – 100% Regulation Ripple and noise – single output model ± 1.0 % max. – dual output models balanced load ± 1.0 % max. – dual output models unbalanced load ± 3.0 % max. (20 MHz Bandwidth) 450 mVpk-pk max Temperature coefficient ± 0.02 % / ℃ Current limitation > 110% of Iout max., constant current Short circuit protection Hiccup mode, indefinite (automatic recovery) – single output model 680 μF max. – dual output model 300 μF max. – Operating – 40°C ... + 75°C(no derating) – Case temperature + 95 °C max. – Storage – 40 °C ... + 125 °C Capacitive load General Specifications Temperature ranges Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) >1 Mio. h @ + 25 °C Isolation voltage Input/Output 1500 VDC Isolation capacity Input/Output 380 pF typ Isolation resistance Input/Output (500 VDC) > 1000 M Ohm Switching frequency 350 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 1950 , IEC 60950, EN 60950 Compliance up to 60 VDC input voltage(SELV limit) Safety approval cUL / UL File E188913 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 3 WRA-ZD-5W&WRB-ZD-5W Series Outline Dimensions mm (inches) Pin-Out Pin Single Dual 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No function –Vout 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Pin diameter Ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (0.02) RECOMMENDED FOOTPRINT TUBE OUTLINE DIMENSIONS RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 3