WRA-YD-8W&WRB-YD-8W Series 8W, WIDE INPUT, ISOLATED & REGULATED DUAL/SINGLE OUTPUT DC-DC CONVERTER SELECTION GUIDE Order code Input voltage range Output voltage Output current max. Efficiency typ. WRB1203YD-8W 9 – 18VDC 3.3VDC 2000mA 80% WRB1205YD-8W 9 – 18VDC 5VDC 1500mA 83% WRB1212YD-8W 9 – 18VDC 12VDC 665mA 88% FEATURES WRB1215YD-8W 9 – 18VDC 15VDC 535mA 87% ◆DIP-24 package with industry WRA1205YD-8W 9 – 18VDC ± 5VDC ±800mA 83% WRA1212YD-8W 9 – 18VDC ±12VDC ±335mA 87% ◆Wide 2:1 input voltage range WRA1215YD-8W 9 – 18VDC ±15VDC ±265mA 85% ◆Input filter meets EN 55022,class A WRB2403YD-8W 18 – 36VDC 3.3VDC 2000mA 80% ◆Extended operating temperature range: WRB2405YD-8W 18 – 36VDC 5VDC 1500mA 83% WRB2412YD-8W 18 – 36VDC 12VDC 665mA 86% ◆Remote On/Off WRB2415YD-8W 18 – 36VDC 15VDC 535mA 85% ◆Shielded metal case with insulated WRA2405YD-8W 18 – 36VDC ± 5VDC ±800mA 82% WRA2412YD-8W 18 – 36VDC ±12VDC ±335mA 86% WRA2415YD-8W 18 – 36VDC ±15VDC ±265mA 85% WRB4803YD-8W 36 – 75VDC 3.3VDC 2000mA 80% WRB4805YD-8W 36 – 75VDC 5VDC 1500mA 83% WRB4812YD-8W 36 – 75VDC 12VDC 665mA 86% WRB4815YD-8W 36 – 75VDC 15VDC 535mA 86% WRA4805YD-8W 36 – 75VDC ± 5VDC ±800mA 85% WRA4812YD-8W 36 – 75VDC ±12VDC ±335mA 87% WRA4815YD-8W 36 – 75VDC ±15VDC ±265mA 87% Standard footprint -40℃～﹢85℃ baseplate ◆Lead free design, RoHS compliant ◆3 Year product warranty MODEL SELECTION ① ② ③ ④ ⑤ ⑥ WRB 24 15 Y D -8W ①Product Series ②Input Voltage ③Output Voltage ④Wide (2:1) Input Range ⑤DIP24 Package Style ⑥ Rated Power APPLICATIONS *Input voltage can’t exceed this value,or will cause the permanent damage. The WRA-YD-8W&WRB-YD-8W series is a family of high performance 8W DC/DC converter modules featuring wide 2:1 input voltage ranges in a DIP-24 package with industry standard footprint. A very high efficiency allows an operating temperature range of –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A with external components. Further standard features include remote On/Off and short-circuit protection. Typical applications for these converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where isolated,tightly regulated voltages are required and space is limited on the PCB. MICRODC reserves the copyright http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 4 WRA-YD-8W&WRB-YD-8W Series Input Specifications 12 Vin models: 20 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. 12 Vin; 3.3 700 mA typ. 12 Vin; other output models: 820 mA typ. 24 Vin; 3.3 Vout models: 350 mA typ. 24 Vin; other output models: 400 mA typ 48 Vin; 3.3 Vout models: 170 mA typ. 48 Vin; other output models: 200 mA typ. 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input current (no load) Input current (full load) Surge voltage (100 msec. max.) Vout models: Conducted noise (input) EN 55022 level A, FCC part 15, level A ESD (input) EN 61000-4-2, Perf. Criteria B Fast Transient (input) EN 61000-4-4, Perf. Criteria B Surge (input) EN 61000-4-5, Perf. Criteria B Output Specifications Voltage set accuracy ± 2% – Input variation Vin min. to Vin max 0.2 % max. – Load variation 25 – 100% Regulation single output models: 1 % max. dual output models: 1 % max. – Load cross variation 25 % / 100 % 5 % max. Temperature coefficient 0.02 % /K Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Start up time (nominal Vin and constant 600 ms typ. Transient response(25% load step change) 200 μs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150% of Iout max typ. foldback 10% of rated max current (operation at lower load condition will not damage these converters, Minimum load (only for dual output models) however, they may not meet all listed Capacitive load 3.3 Vout models: specifications) 3300 μF max 5 Vout models / ± 5 Vout models: 1600 μF max. / ± 1000 μF max. 12 Vout models / ±12 Vout models: 350 μF max. / ± 160 μF max. 15 Vout models / ±15 Vout models: 240 μF max. / ± 100 μF max. General Specifications Temperature ranges – Operating –40 °C to +85 °C – Case temperature +100 °C max. – Storage –55 °C to +105 °C Derating 3.3% /K above 70°C Humidity (non condensing) 95 % rel H max. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 4 WRA-YD-8W&WRB-YD-8W Series General Specifications Reliability, calculated MTBF (MIL-HDBK-217F ground benign) >715000 h @ +25 ℃ Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacity – Input/Output 300 pF max. Isolation Resistance – Input/Output > 1000 M Ohm Switching frequency 300 kHz typ. (pulse width modulation PWM) Vibration 10-55Hz, 2G, 30 minutes along X,Y,Z UL/cUL 60950-1, IEC/EN 60950-1 compliance Safety standards up to 60 VDC input voltage (SELV limit) Safety approvals – UL/cUL certifications - File E188913 Remote On/Off On: 3.5 ... 12 VDC or open circuit Off: 0 ... 1.2 VDC or short circuit pin 1 and pin 2/3 Off idle current: 2.5 mA Physical Specifications Case material copper , nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL94V-0 rated) Weight 17 g (0.60 oz) Soldering temperature max. 265 ℃ / 10 sec. Outline Dimensions FOOTPRINT DETAILS Pin Single Dual 1 Remote On/Off Remote On/Off 2 –Vin (GND (GND） –Vin (GND (GND） 3 –Vin (GND (GND） –Vin (GND (GND） 9 No con con.. Common 11 No con con.. –Vou Voutt 14 +Vout +Vout 16 –Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) NC: N0 Connection Dimensions in [mm], () = Inch Pin diameter Ø 0.5 ±0.05 Tolerances (0.02 ±0.002) ±0.5 (0.02) Pin pich tolerances ±0.35 (0.014) Specifications can be changed any time without notice http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 3 of 4 WRA-YD-8W&WRB-YD-8W Series TUBE OUTLINE DIMENSIONS Note: Unit :mm[inch] RECOMMENDED FOOTPRINT RECOMMENDED FOOTPRINT Top view grid:2.54mm(0.1inch) diameter:1.00mm(0.039inch) General tolerances:±0.50mm[±0.020inch] L=530mm[20.866inch] Tube Quantity: 15pcs L=220mm[8.661inch] Tube Quantity: 6pcs Note: 1. The load shouldn't be less than 10%, otherwise ripple will increase dramatically. 2. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. 3. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 4. In this datasheet, all the test methods of indications are based on corporate standards. 5. Only typical models listed, other models may be different, please contact our technical person for more details. RoHS COMPLIANT INFORMATION This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering systems. Microdc Professional Power Module,Inc. Tel:0086-20-86000646 REACH COMPLIANT INFORMATION E-mail:[email protected] Website:http://www.microdc.cn http://www.microdc.cn This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances through the registration, inspection and approval. Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 4 of 4