0305 Basic Part Number Length L Dia. D 0305-0 0305-1 0305-2 .095 .105 .155 .056 .058 .058 M PR E CI NE D ON S I CHI A PIN RECEPTACLES for .025” - .037” diameter pins and .025” square pins PINS 0279 0330 0279-0-15-XX-47-XX-10-0 0330-0-15-XX-47-XX-10-0 Hex press-fit in .062 plated thru hole Hex press-fit in .079 plated thru hole T&R Packaging 0305-X-15-XX-47-XX-10-0 Solder mount in .059/.061 mounting hole Also available on 8mm or 24mm wide carrier tape: See chart for Details. Order as: 0305-X-57-XX-47-XX-10-0 Basic Part Number Tape Width Parts per 13” Reel 0305-0 0305-1 0305-2 8mm 8mm 24mm 6,000 6,000 1,500 0300/8300 0301 0309 X300-X-15-XX-47-XX-10-0 0301-1-15-XX-47-XX-10-0 0309-2-15-XX-47-XX-10-0 Solder mount in .042 min. mounting hole Solder mount in .042 min. mounting hole Solder mount in .042 min. mounting hole Basic Part Number 0300-1 0300-2 8300-0 Length A .110 .187 .140 0399 1304 1134 .070 DIA. Basic Part Number 0399-0 0399-1 .064 DIA. Length A .030 .031 .089 .200 .230 .180 .059 DIA. .450 .200 .110 .045 DIA. HOLE 0399-X-15-XX-47-XX-04-0 1304-0-15-XX-47-XX-04-0 1134-0-18-15-47-27-10-0 Press-fit in .062 mounting hole Press-fit in .061 mounting hole Press-fit in .061 mounting hole SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT DIMENSION IN INCHES TOLERANCES ON: LENGTHS: ±.005 DIAMETERS: ±.002 ANGLES: ± 2° w w w. m i l l - m a x . c o m ORDER CODE: XXXX - X - 15 - XX - 47 - XX - XX - 0 BASIC PART # SPECIFY SHELL FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 15 10μ” GOLD OVER NICKEL (RoHS) RoHS 2002/95/EC SPECIFY CONTACT FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 27 30μ” GOLD OVER NICKEL (RoHS) CONTACT #47 CONTACT (DATA ON PAGE 222) 148 516-922-6000