PIN RECEPTACLES for .015” - .018” diameter pins (#09 contact) for .015” - .020” diameter pins (#11 contact) and .015” - .022” diameter pins (#21 contact) (see specific contact range on pages 216 & 217) 0552 M PR E CI NE D 0467 ON S I CHI A PINS 5522 Basic Part Number Length L Depth N 0552-1 0552-2 .136 .170 .120 .150 0552-X-15-XX-X1-XX-10-0 0467-0-15-XX-21-XX-04-0 Press-fit in .037 mounting hole Solder mount in .040 min. mounting hole Also available on 16mm wide carrier tape: 1,500 parts per 13” reel. Order as: 0552-X-57-XX-X1-XX-10-0 5522-0-15-XX-09-XX-10-0 Solder mount in .040 min. mounting hole 0569 6023 6214 2086 0569-0-15-XX-X1-XX-10-0 6023-0-15-XX-21-XX-10-0 6214-0-15-XX-21-XX-10-0 2086-0-15-XX-21-XX-04-0 Solder mount in .040 min mounting hole Solder mount in .040 min mounting hole Solder mount in .040 min mounting hole Press-fit in .040 mounting hole 0461 8579 Basic Part Number Length A 0461-0 0461-1 0461-2 0461-3 0461-4 0461-5 .400 .275 .180 .125 .060 .440 Basic Part Number Length L 8579-0 8579-1 .234 .295 8579-X-15-XX-X1-XX-10-0 Solder mount in .040 min. mounting hole Also available on 24mm wide carrier tape: 1,200 parts per 13” reel. Order as: 8579-0-57-XX-X1-XX-10-0 0461-X-15-XX-X1-XX-04-0 Solder mount in .020 min. mounting hole SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT DIMENSION IN INCHES TOLERANCES ON: LENGTHS: ±.005 DIAMETERS: ±.002 ANGLES: ± 2° w w w. m i l l - m a x . c o m ORDER CODE: XXXX - X - 15 - XX - XX - XX - XX - 0 BASIC PART # SPECIFY SHELL FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 15 10μ” GOLD OVER NICKEL (RoHS) RoHS 2002/95/EC SPECIFY CONTACT FINISH: 02 100μ” TIN/LEAD OVER NICKEL 84 100μ” TIN OVER NICKEL (RoHS) 27 30μ” GOLD OVER NICKEL (RoHS) SELECT CONTACT #09, #11 or #21 CONTACT (DATA ON PAGES 216 & 217) 129 516-922-6000