0327/0351/0373 Basic Part Number Length L Depth N 0327-0 0351-0 0373-0 .206 .226 .270 .180 .200 .241 M PR E CI NE D ON S I CHI A PIN RECEPTACLES for .032” - .046” diameter pins PINS 0328 0334 0328-0-15-XX-34-XX-10-0 0334-0-15-XX-34-XX-10-0 Hex press-fit in .079 plated thru hole Hex press-fit in .079 plated thru hole T&R Packaging 03XX-0-15-XX-34-XX-10-0 Solder mount in .075 min. mounting hole Also available on 12mm or 24mm wide carrier tape: See chart for Details. Order as: 03XX-0-57-XX-34-XX-10-0 0312 Basic Part Number Tape Width Parts per 13” Reel 0327-0 0351-0 12mm 24mm 1,400 1,100 0333 0357 0317 0333-0-42-XX-34-XX-10-0 0357-0-15-XX-34-XX-10-0 0317-0-15-XX-34-XX-10-0 Press-fit in .076 mounting hole Press-fit in .078 mounting hole Solder mount in .091min. mounting hole 0312-0-15-XX-34-XX-10-0 Solder mount in .075 min. mounting hole Also available on 12mm wide carrier tape: 1,400 parts per 13” reel. Order as: 0312-0-57-XX-34-XX-10-0 0340 0345 0316 0314 0340-0-15-XX-34-XX-10-0 0345-0-15-XX-34-XX-10-0 0316-0-15-XX-34-XX-10-0 0314-0-15-XX-34-XX-10-0 Solder mount in .087 min. mounting hole Press-fit in .089 mounting hole Solder mount in .087 min. mounting hole Solder mount in .087 min. mounting hole SPECIFICATIONS SHELL MATERIAL: Brass Alloy 360, 1/2 Hard CONTACT MATERIAL: Beryllium Copper Alloy 172, HT DIMENSION IN INCHES TOLERANCES ON: LENGTHS: ±.005 DIAMETERS: ±.002 ANGLES: ± 2° w w w. m i l l - m a x . c o m ORDER CODE: XXXX - X - XX - XX - 34 - XX - 10 - 0 BASIC PART # SPECIFY SHELL FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 15 10μ” GOLD OVER NICKEL (RoHS) RoHS 2002/95/EC SPECIFY CONTACT FINISH: 01 200μ” TIN/LEAD OVER NICKEL 80 200μ” TIN OVER NICKEL (RoHS) 27 30μ” GOLD OVER NICKEL (RoHS) CONTACT #34 CONTACT (DATA ON PAGE 224) 153 516-922-6000