Vol.10 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 Contents Classification of NEC TOKIN's EMI suppression parts ･･･････3 DIP Type Common Mode Power Line SH Series ･････････････････････････････････････････････8 SHO Series ･･･････････････････････････････････････････10 SBT-03W Series ･･････････････････････････････････････11 Common Mode Signal Line SBT-01W Series ･･････････････････････････････････････12 Toroidal Cores with Wound Cables ･･････････････････････13 DIP Noise Filters D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A ･14 DIP Noise Filters D-16C ････････････････････････････････16 DIP Noise Filters D-37C, 40C, 42C, 45C, 47C ･････････････17 DIP Noise Filters D-55C, 58C ･･･････････････････････････19 Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-101, 201, 202, 202S ･･･20 Noise Filters for Telephone Sets ST-101A, 201A, 202A ･････21 Noise Filters for Telephone Sets ST-110AV, 110AH, 110BV, 110BH ･･22 Noise Filters for Telephone Sets ST-101F2, 101F4 ････････23 Noise Filters for Telephone Sets ST-104A4, 204A Series ･･･24 Normal Mode SBT Series ･･･････････････････････････････････････････25 SNT Series ･･･････････････････････････････････････････26 Bead Inductors (Lead Type) ････････････････････････････27 Bead Inductors(Winding Type) ･･････････････････････････30 EMC Filter DFD Series ･･･････････････････････････････････････････32 Tape and Reel Dimensions ･････････････････････････････33 SMD Type Common Mode Power Line SBS9080 Series･･･････････････････････････････････････34 SBP Series ･･･････････････････････････････････････････35 DCM Series･･･････････････････････････････････････････36 Common Mode Signal Line EMC Chip Filters M-500CT/M-600T Series････････････････38 Precautions ･･･････････････････････････････････････････40 Tape and Reel Dimensions ･････････････････････････････41 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 Classification of NEC TOKIN's EMI suppression parts SMD Type Power Inductors DIP Type Large-Current Power Inductors MPC Series P9 Large-Current Power Inductors MPCG Series P13 Large-Current Power Inductors MPLC Series P15 Large-Current Power Inductors C • PI Series P18 Leadless Power Inductors PLC-0735 Series P21 Leadless Power Inductors PLC-0745 Series P24 Leadless Power Inductors PLC-0755 Series P27 Leadless Power Inductors PLC-0760 Series P30 Leadless Power Inductors PLC-1035 Series P33 Leadless Power Inductors PLC-1045 Series P36 Leadless Power Inductors PLC-1055 Series P39 Leadless Power Inductors PLC-1060 Series P42 Leadless Power Inductors PLC-1235 Series P45 Leadless Power Inductors PLC-1245 Series P48 Leadless Power Inductors PLC-1255 Series P51 Leadless Power Inductors P • I Series P54 Leadless Power Inductors P • H Series P56 SN-S3M Series P58 Leadless Power Inductors H • DI-0520 Series P60 Leadless Power Inductors H • DI-0630 Series P62 Leadless Power Inductors H • DI-0740 Series P64 Leadless Power Inductors H • DI-0940 Series P66 Leadless Power Inductors H • DI-1040 Series P68 Leadless Power Inductors H • DI-1240 Series P70 Leadless Power Inductors H • DI-1245G Series P72 Leadless Power Inductors H • DI-1280G Series P74 High Inductance Type SMD Inductors H • LI Series P76 SSB Coils P78 OH Coils P84 SHP Coils P86 SBC Coils P87 SBCP-47HY Coils P93 SBCP-87HY Coils P95 SBCP-80HY Coils P97 (Continued) DC Line Filters VOL.10 3 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 Magnetic Shields/ Absorbing Materials EMI Core Sheet Type EMI suppressors P99 SBCP-14HY Coils P101 SBPSC Coils P103 FLEX SUPPRESSOR® Film ImpedorTM New Products RingType Toroidal Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism ESD-R-H Series P6 Snap-on Cores for Round Cables with High Heat Resistance and Cable Holding Mechanism ESD-SR-H Series P7 Toroidal Cores (Bare Type) P8 Toroidal Cores (Coated Type) P12 Toroidal Cores with Case P14 Toroidal Cores with Snail-shaped Case P16 Snap-on Type Snap-on Cores for Round Cables P18 Flat Type Solid / Split Cores for Round Cables P20 Bead Type Bead Cores P28 SH Series P8 SHO Series P10 SBT-03 W Series P11 SBT-01 W Series P12 DIP Type DC Line Filters SBCP-11HY Coils Common Mode Power Line Common Mode Signal Line Common Mode for Telephone Sets Normal Mode Toroidal Cores with Wound Cables P13 DIP Noise Filters D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A P14 DIP Noise Filters D-16C P16 DIP Noise Filters D-37C, 40C, 42C, 45C, 47C P17 DIP Noise Filters D-55C, 58C P19 Noise Filters for Telephone Sets ST-101, 201, 202, 202S P20 Noise Filters for Telephone Sets ST-101A, 201A, 202A P21 Noise Filters for Telephone Sets ST-110AV, 110AH, 110BV, 110BH P22 Noise Filters for Telephone Sets ST-101F2, 101F4 P23 Noise Filters for Telephone Sets ST-104A4, 204A series P24 SBT Series P25 SNT Series P26 Bead Inductors (Lead Type) P27 Bead Inductors (Winding Type) P30 (Continued) DC Line Filters VOL.10 4 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type EMC Filter DFD Series P32 Common Mode Power Line SBS9080 Series P34 SBP Series P35 DCM Series P36 EMC Chip Filters M-500CT/M-600T Series P38 SCR Coils High Impedance Type P4 SCR Coils Low Height Type P5 Earth inductors SNG series P6 Common mode SC Coils — Standard Type P8 SC Coils — Case Type SC-E, F, V Type P10 SC Coils — Case Type SC-A Type P12 SC Coils — Terminal Base Type SC-J Type P13 SC Coils — Terminal Base Type SC-GJ Type P15 SC Coils — Terminal Base Type SC-JV Type P16 SC Coils — Terminal Base Type SC-JS Type P17 SC Coils — Terminal Base Type SC-JH Type P18 SC Coils — Small Type SC-G/GS Type P19 SC Coils — Compact, High-Inductance Type, SCF Type P21 SC Coils — High Frequency Type SC-D Type P22 SU Coils SU 7VC Type P23 SU Coils SU 9V/9H Type P24 SU Coils SU 9VF/9HF Type P26 SU Coils SU 10VFC-R Type P27 SU Coils — High Frequency Type SU 9VD Type P28 SU Coils — High Frequency Type SU 10VD Type P29 SU Coils — High Frequency Type SU 16VD Type P30 SS Coils SS11VL Type P31 SS Coils SS11V/H-CH Type P33 SS Coils SSB11V-R/11H-R Type P35 SS Coils SS17 HB Type P36 Common Mode Signal Line AC Line Filters New Products (Continued) DC Line Filters VOL.10 5 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SS Coils SS17VA/HA Type P39 SS Coils SS20H Type P42 SS Coils SS21V Type P44 SS Coils SS24V/H-CH Type P46 SS Coils SS26V Type P48 SS Coils SS28V/H-CH Type P50 SS Coils SSB28V/H Type P52 SS Coils SS30V Type P53 SS Coils SS35V/35H Type P55 SS Coils SS38V Type P56 HHB Coils High μ and Low Core loss Type P59 SN Coils Small and Standard Type P63 SN Coils Terminal Base Type — J Type P66 SN Coils Terminal Base Type — JA Type P67 SN Coils Terminal Base Type — JB Type P68 SN Coils Terminal Base Type — W Type P69 SN Coils Terminal Base Type — P1 Type P70 SN Coils Terminal Base Type — P2 Type P71 High frequency type SHB Coils (Booster Coils for Active Filters) P72 New Products LF-SF Series Plastic Case Three-Phase Noise Filter P8 GT-SF Series Plastic Case Single-Phase Noise Filter P9 LF Series Small Current Type P10 LF Series Small Current Type with Screw Terminal P11 LF Series Screw Terminal Type P13 LF Series Large Current Type P15 LF Series Three-Phase Type P16 LF Series For Inverters P18 LF Series Compliance with CE Marking(LF-3000 Series) P21 LH Series Low-Frequency Inverters P23 LH Series Compliance with CE Marking(LH-4 Series) P25 Normal mode Noise Filters Casing Type Metal box (Continued) DC Line Filters VOL.10 6 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 Metal cylinder Plastic box Inlet Type HFP Series P26 GT Series Screw Terminal P28 GT Series Faston® Terminal P30 GT Series For VCCI P32 GF Series P33 VU Series P34 VC Series P36 VG-FPZ Series for inverter installed home appliances' surge control P37 RG Series P38 MR Series P40 MA Series P42 GL Series C Type P43 GL Series F,FV,FVP Type P45 GL Series H Type P47 GL Series M Type P49 DC Line Filters VOL.10 7 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Power Line SH Series [RoHS Compliant] Model for 2 lines for 3 lines SH-101 SH-102 SH-201 SH-202 SH-301 SH-302 SH-211 SH-212 SH-311 SH-312 SH-121 SH-122 SH-321 SH-322 SH-132 SH-432 SH-S132 Rated voltage DC (V) Rated current (A) Inductance (µH) min. DC resistance (m/line) max. 150 150 150 150 150 150 150 150 150 150 50 50 50 50 50 50 50 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 2.4 2.4 1.0 0.35 1.5 0.5 1.5 3.2 7.5 0.5 1.5 3.2 7.5 0.35 1.5 3.5 7.5 2.6 30.0 1.7 16 26 16 20 22 26 18 23 25 30 11 20 14 20 51 51 81 Operating temperature range (˚C) –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +80 –25 to +60 –25 to +60 –25 to +80 Shape and dimensions Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 DC Line Filters VOL.10 8 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Power Line Shape and Dimensions/Circuit Diagram 12.5 max. 10 max. Fig. 2 14 max. 12 max. ø0.6 ø0.7 10±0.5 7.5±0.5 10±0.5 12.5 max. Fig. 3 Circuit diagram 10 7.5 4.0±1.0 7.5 12 max. Circuit diagram 10 4.0±1.0 9.5 max. Fig. 1 7.5±0.5 10 max. 10 max. Circuit diagram 7.5 10 ø0.7 5 3 4 9.0 max. 2 Circuit diagram 6 1 2 5 3 4 Circuit diagram 1 6 2 5 3 4 1 2 3 6 5 4 (3.0) (3.0) 10.5 max. 10.5 max. 6 10 max. Fig.5 10 max. 1 7.5±0.5 9.0 max. Fig.4 3.0±0.7 10±0.5 (ø0.6) (6.5) (2.5) (ø0.6) (6.5) (2.5) (2.5) (2.5) [mm] Impedance vs. Frequency 10000 1000 302 Impedance () Impedance () 10000 301 100 202 201 10 1 1000 312 311 100 211 10 1 1 10 100 1000 1 10 Frequency (MHz) 100 1000 Frequency (MHz) 10000 10000 132 102/122 Impedance () 1000 Impedance () 212 101/121 100 10 1 432 1000 322 100 321 S132 10 1 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 9 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Power Line SHO Series [RoHS Compliant] Model Rated voltage DC (V) Rated current (A) Inductance (µH) min. SHO-101 SHO-102 SHO-301 SHO-302 SHO-303 SHO-402 SHO-501 50 50 50 50 50 50 50 4.0 4.0 4.0 4.0 5.0 0.8 0.8 2.0 0.6 12.0 3.9 6.0 99.0 17.5 DC resistance (m/line) max. 15.5 10.0 15.5 10.0 8.0 120.0 105.0 Shape and Dimensions Operating temperature range (˚C) –25 to +70 –25 to +70 –25 to +70 –25 to +70 –25 to +75 –25 to +80 –25 to +80 D Dimensions(mm) T R 11Max. 11Max. 11Max. 11Max. 11Max. 7.5Max. 6.2Max. 7.5Max. 7.5Max. 7.5Max. 7.5Max. 8Max. 5Max. 3.4Max. 10±3 10±3 10±3 10±3 10±3 4±2 4±2 Circuit Diagram D T 3 1 4 R 2 Soldered 4 1 2 3 [mm] Impedance vs. Frequency 10000 Impedance () 301 303 402 501 1000 101 100 102 10 302 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 10 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Power Line SBT-03W Series [RoHS Compliant] Model Rated voltage DC (V) Rated current (A) SBT-0308W SBT-0310W SBT-0315W 50 50 50 3.0 2.5 2.0 Inductance (100kHz, 1mA) (µH) min. 6.75 7.7 11.9 • Withstanding voltage: 200VDC (one minute, between lines) DC resistance (m) max. 20 30 45 Operating temperature range (˚C) –25 to +85 –25 to +80 –25 to +75 Wire size (mmø) Packaging 0.4 0.35 0.3 Bulk (100 pcs.) • Insulation resistance: more than 10M (100VDC, between lines) Shape and Dimensions Circuit Diagram 10.5 max. 7.5 max. 3 10.5max. 4-ø0.6 1 4 N1 2 7.5±0.5 N2 5.0 7.5 2 5.0 4 3.5±1.0 8.0 max. 7.5max. 7.5 1 3 5.0±0.5 [mm] [mm] Impedance vs. Frequency 10000 0315W Impedance () 1000 0308W 100 0310W 10 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 11 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line SBT-01W Series [RoHS Compliant] Model Rated voltage DC (V) Rated current (mA) SBT-0115W SBT-0140W SBT-0160W SBT-0180W 50 50 50 50 500 500 500 500 Inductance (1kHz, 70mA) (µH) 5 40±35% 60±35% 80±35% • Withstanding voltage: 200VDC (one minute, between lines) (1.0) (ø0.6) 1 3 2 2.54 3 4 N2 2.54 2 2 5.08 4.5±1.0 (1.0) 4 3 Bulk (100pcs.) Circuit Diagram 8.0 max. 6.4 max. 6.4max. 1 1 30 40 45 55 Packaging • Insulation resistance: more than 10M (100VDC, between lines) Shape and Dimensions 7.5 max. 7.5max. Operating temperature range (˚C) –25 to +70 –25 to +70 –25 to +70 –25 to +70 DC resistance (m) max. 4 N1 5.08±0.5 5.08 2.54 ±0.3 [mm] [mm] Impedance vs. Frequency 10000 0180W 0160W Impedance () 1000 0140W 0115W 100 10 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 12 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line Toroidal Cores with Wound Cables [RoHS Compliant] Model Dimensions (mm) Core ESD-H-12E ESD-H-14U ESD-H-14NU ESD-R-12C ESD-R-14A ESD-R-14C2 A B C D 16 17.5 17.5 20 7 7 5 5 5 25 15 15 No. of turns Wire Winding status Frequency range (MHz) 7 10 10 UL1007 AWG26 (ø0.4) UL1609 AWG26 (ø0.4) UL1609 AWG26 (ø0.4) Bi-filar winding Bi-filar winding Bi-filar winding Up to 300 Up to 100 Up to 300 • Recommended soldering conditions: 350±10˚C, 2 to 3 sec. • Rated current:1A Shape and Dimensions • Rated Voltage: 125V Circuit Diagram ESD-H Series B C D A Impedance vs. Frequency 1K 10K 5K Impedance () Impedance () 14U 100 12E 10 1 14NU 1K 500 100 50 10 1 5 10 50 Frequency (MHz) 100 500 1 5 10 50 100 500 Frequency (MHz) DC Line Filters VOL.10 13 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line DIP Noise Filters D-03C, 03C1, 05N1, 07C1, 08C2, 08C2A [RoHS Compliant] Model Number of terminals/Circuits Rated voltage DC (V) 16P/2 circuits x 4 Common mode 50 8 cores 16P/8 circuits Normal mode 1 core Circuit diagram D-03C 1 2 16 15 D-03C1 7 8 10 9 1 2 16 15 8 9 1 2 16 15 8 9 D-08C2 1 2 3 4 8 7 6 5 D-08C2A 1 2 3 4 8 7 6 5 D-05N1 D-07C1 Rated current DC (mA/Line) DC resistance (m/Line) max. Operating temperature range (˚C) 150 75 –20 to +70 100 150 –20 to +70 50 100 10 –20 to +70 16P/8 circuits Common mode 50 300 100 –20 to +70 1 core 8P/4 circuits Common mode 50 2300 25 –20 to +70 1 core 8P/4 circuits Common mode 50 500 70 –25 to +65 4 cores • Withstanding voltage: 200VDC (one minute, between lines) • Insulation resistance: more than 10M (100VDC, between lines) Shape and Dimensions 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 4.0min. 2.85±0.5 4.0min. 10 max. (0.5) R2 0.2 25.5 max. 2.54±0.25 16 15 14 13 12 11 10 9 9.0 max. (0.5) 23 max. 1 2 3 4 5 6 7 8 2.54±0.25 16 15 14 13 12 11 10 9 D-07C1 12.5 max. 8.0 max. (0.5) 25.5 max. R2 0.2 1 2 3 4 5 6 7 8 D-05N1 25.5 max. 12.5 max. ø0.6 2.54±0.25 D-03C, 03C1 20.32±0.25 ø0.6 ø0.6 7.62±0.25 7.62±0.25 D-08C2 D-08C2A 21 max. 12 max. ø0.7 5.0±0.5 7.0±0.5 3.0 min. 20 max. 3.0 min. 5.0±0.5 16 max. 14 max. 21max. ø0.7 7.0±0.5 [mm] DC Line Filters VOL.10 14 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line Impedance vs. Frequency 5K Impedance () 03C1 1K 07C1 500 03C 08C2 08C2A 100 05N1 50 10 1 5 10 50 100 500 Frequency (MHz) DC Line Filters VOL.10 15 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line DIP Noise Filters D-16C [RoHS Compliant] Model Circuit diagram 1 2 3 4 D-16C 8 7 6 5 Number of terminals/ Circuits Rated voltage DC (V) Rated current DC (mA/Line) DC resistance (m/Line) max. Operating temperature range (˚C) 8P/4 circuits Common mode 50 100 50 –20 to +70 1 core • Withstanding voltage: 200VDC (one minute, between lines) • Insulation resistance: more than10M (100VDC, between lines) Shape and Dimensions D-16C 1 8 2 7 3 6 4 5 2.54±0.25 8.0 max. 16 max. 12.5 max. 4.0 min. ø0.6 7.62±0.25 [mm] Impedance vs. Frequency Impedance () 5K 1K 500 16C 100 50 10 1 5 10 50 100 500 Frequency (MHz) DC Line Filters VOL.10 16 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line DIP Noise Filters D-37C, 40C, 42C, 45C, 47C [RoHS Compliant] Model Number of terminals/ Circuits Rated voltage DC (V) Rated current DC (mA/Line) DC resistance (m/Line) max. Operating temperature range (˚C) 1 core 20P/10 circuits Common mode 50 300 200 –20 to +70 1 core 6P/ 3 circuits Common mode 50 300 200 –20 to +70 1 core 10P/ 5 circuits Common mode 50 300 200 –20 to +70 1 core 16P/ 8 circuits Common mode 50 300 150 –20 to +70 1 core 20P/ 10 circuits Common mode 50 300 200 –20 to +70 Circuit diagram 1 2 20 19 10 11 1 2 3 6 5 4 1 2 10 9 5 6 1 2 16 15 8 9 1 2 20 19 10 11 D-37C D-40C D-42C D-45C D-47C • Withstanding voltage: 200VDC (one minute, between lines) • Insulation resistance: more than 10M (100VDC, between lines) Shape and Dimensions D-37C D-40C, 42C, 45C, 47C 9.0 max. 4.5±0.5 11.5 max. 28 max. Lot No. a a a a a a a a a (a=2.5±0.25) 5.0±0.25 max. 4.5 10 max. ø0.5 2.54±0.3 (22.5) ø0.5 7.62 2.54(n-I)=R L Model Number of Circuits D-40C 3 D-42C 5 D-45C 8 D-47C 10 10.5 max. R 5.08 10.16 17.78 22.86 L 12.7 max. 18 max. 25 max. 28 max. [mm] DC Line Filters VOL.10 17 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line Impedance vs. Frequency 10000 1000 Impedance () Impedance () 10000 37C 100 10 1 1000 40C 100 10 1 1 10 100 1000 1 10 Frequency (MHz) 1000 1000 Impedance () 10000 Impedance () 10000 42C 100 100 1000 Frequency (MHz) 10 45C/47C 100 10 1 1 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 18 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode Signal Line DIP Noise Filters D-55C, 58C [RoHS Compliant] Model Number of terminal/ Circuits Rated voltage DC (V) Rated current DC (mA/Line) DC resistance (m/Line) max. Operating temperature range (˚C) 1 core 10P/5 circuits Common mode 50 300 200 –20 to +70 1 core 16P/8 circuits Common mode 50 300 200 –20 to +70 Circuit diagram D-55C D-58C 1 2 10 9 5 6 1 2 16 15 8 9 • Withstanding voltage: 200VDC (one minute, between lines) • Insulation resistance: more than10M (100VDC, between lines) Shape and Dimensions max. 4.5 10max. Lot No. 2.54±0.25 ø0.5 7.62±0.25 2.54(n-I)=R L 10.5max. Model Number of Circuits D-55C 5 D-58C 8 R 10.16 17.78 L 18 max. 25 max. [mm] Impedance vs. Frequency Impedance () 5K 1K 55C 500 58C 100 50 10 1 5 10 50 100 500 Frequency (MHz) DC Line Filters VOL.10 19 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-101, 201, 202, 202S [RoHS Compliant] Frequency range (MHz) Model ST-101 ST-201 ST-202 ST-202S Impedance (k) min. 0.5 to 7 7 to 40 7 to 100 7 to 100 3 1.5 0.6 0.6 Rated voltage DC (V) Rated current (mA) DC resistance (m/Line) max. 50 50 50 50 200 200 1000 1000 180 100 40 35 (at 0.5 MHz) (at 7 MHz) (at 100 MHz) (at 100 MHz) • Withstanding voltage: 500VDC (one minute, between lines) • Recommended soldering conditions: 350±10˚C, 2 to 3 sec. Operating temperature range (˚C) –20 to +75 –20 to +75 –20 to +75 –20 to +75 Remarks AM band FM band FM band FM band • Insulation resistance: more than10M (250VDC, between lines) Shape and Dimensions/Circuit Diagram ST-202 ST-202S 13 max. 9.0 max. ø0.4 10±2.0 5.0±2.0 15.0±2.0 ø0.32 Installation Examples Circuit diagram 7.0 max. 2.0 max. 16 max. 2.0 max. 11 max. 18 max. 10±2.0 ST-101, 201 ø0.32 [mm] Design Examples Installation position Telephone set Rosette Installation at rosette or circuit input/output Terminal (facsimile, card reader, etc.) Telephone line Telephone ST, LFT, HFT Installed filter ST-201 ST-101 ST-201A ST-101A ST-202 ST-101F2 ST-202A ST-101F4 ST-202S ST-110AH SZ-03 ST-110AV ST-110BH ST-110BV ST-104A4 ST-204A1 ST-204A3 ST-204A4 Insertion in Driver/ Receive circuit in telephone Line terminal unit L1 Installed filter LFT HFT Drv. Circuit L2 Telephone Rec. Impedance vs. Frequency Impedance (k) 100 101 10 1 201 0.1 0.01 0.1 202 202S 1 10 100 500 Frequency (MHz) DC Line Filters VOL.10 20 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-101A, 201A, 202A [RoHS Compliant] Frequency range (MHz) Model ST-101A ST-201A ST-202A 0.5 to 7 7 to 40 7 to 100 Impedance (k) min. Rated voltage DC (V) Rated current (mA) DC resistance (m/Line) max. 3 (at 0.5 MHz) 1.5 (at 7 MHz) 0.6 (at 100 MHz) 50 50 50 200 200 1000 250 150 50 • Withstanding voltage: 500VDC (one minute, between lines) Operating temperature range (˚C) –20 to +65 –20 to +65 –20 to +65 Remarks AM band FM band FM band • Insulation resistance: more than10M (100VDC, between lines) Shape and Dimensions/Circuit Diagram ø0.7 10.5 max. 7.62±0.5 Circuit diagram 4.0 ± 0.5 20 max. 16 max. 5.08±0.5 [mm] Installation Examples Design Examples Installation position Telephone set Rosette Installation at rosette or circuit input/output Terminal (facsimile, card reader, etc.) Telephone line Telephone ST, LFT, HFT Installed filter ST-201 ST-101 ST-201A ST-101A ST-202 ST-101F2 ST-202A ST-101F4 ST-202S ST-110AH SZ-03 ST-110AV ST-110BH ST-110BV ST-104A4 ST-204A1 ST-204A3 ST-204A4 Insertion in Driver/ Receive circuit in telephone Line terminal unit L1 Installed filter LFT HFT Drv. Circuit L2 Telephone Rec. Impedance vs. Frequency Impedance (k) 100 101A 10 1 201A 202A 0.1 0.01 0.1 1 10 100 500 Frequency (MHz) DC Line Filters VOL.10 21 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-110AV, 110AH, 110BV, 110BH [RoHS Compliant] Model Frequency range (MHz) ST-110AV ST-110AH ST-110BV ST-110BH 0.5 to 7 0.5 to 7 0.5 to 7 0.5 to 7 Impedance (k) min. Rated voltage DC (V) Rated current (mA) DC resistance (/Line) max. 50 50 50 50 300 300 150 150 3 3 7.5 7.5 27 (at 0.5 MHz) 27 (at 0.5 MHz) 150 (Resonant) 150 (Resonant) • Withstanding voltage: 500VDC (one minute, between lines) Operatings temperature range (˚C) –20 to +75 –20 to +75 –20 to +75 –20 to +75 Remarks AM band AM band AM band AM band • Insulation resistance: more than 10M (250VDC,between lines) Shape and Dimensions/Circuit Diagram ST-110AV, ST-110BV 17 max. ST-110AH, ST-110BH 11max. 17 max. 15.5 max. 8.0 4.0 min. 12 max. ø0.6 4.0 min. ø0.6 Circuit diagram 8.0 17 max. Circuit diagram 7.0 8.0±0.5 7.0 7.0±0.5 8.0±0.5 Installation Examples [mm] 7.0±0.5 Design Examples Installation position Telephone set Rosette Installation at rosette or circuit input/output Terminal (facsimile, card reader, etc.) Telephone line Telephone ST, LFT, HFT Installed filter ST-201 ST-101 ST-201A ST-101A ST-202 ST-101F2 ST-202A ST-101F4 ST-202S ST-110AH SZ-03 ST-110AV ST-110BH ST-110BV ST-104A4 ST-204A1 ST-204A3 ST-204A4 Insertion in Driver/ Receive circuit in telephone Line terminal unit L1 Installed filter LFT HFT Drv. Circuit L2 Telephone Rec. Impedance vs. Frequency Impedance (k) 1000 100 10 110BH BV 110AH AV 1 0.1 0.01 0.1 1 10 500 Frequency (MHz) DC Line Filters VOL.10 22 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-101F2, 101F4 [RoHS Compliant] Model Frequency range (MHz) Impedance (k) min. Rated voltage DC (V) Rated current (mA) DC resistance (/Line) max. ST-101F2 ST-101F4 0.5 to 7 0.5 to 7 40 (at 600 kHz) 60 (at 600 kHz) 50 50 200 200 2.7 3.5 • Withstanding voltage: 500VDC (one minute, between lines) Operating temperature range (˚C) –20 to +75 –20 to +75 Remarks AM band AM band • Insulation resistance: more than 10M (250VDC between lines) Shape and Dimensions/Circuit Diagram Bottom view Bottom view 13 max. Circuit diagram ø0.6 5.0±0.5 7.5±0.5 2.0 min. *10.5 max. 7.5±0.5 14 max. 5.0±0.5 *11.5 max. with ST-101F4 [mm] Installation Examples Design Examples Installation position Telephone set Rosette Installation at rosette or circuit input/output Terminal (facsimile, card reader, etc.) Telephone line Telephone ST, LFT, HFT Installed filter ST-201 ST-101 ST-201A ST-101A ST-202 ST-101F2 ST-202A ST-101F4 ST-202S ST-110AH SZ-03 ST-110AV ST-110BH ST-110BV ST-104A4 ST-204A1 ST-204A3 ST-204A4 Insertion in Driver/ Receive circuit in telephone Line terminal unit L1 Drv. Installed filter LFT HFT Circuit L2 Telephone Rec. Impedance vs. Frequency Impedance (k) 1000 100 10 101F4 101F2 1 0.1 0.01 0.1 1 10 500 Frequency (MHz) DC Line Filters VOL.10 23 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Common Mode for Telephone Sets Noise Filters for Telephone Sets ST-104A4, 204A Series [RoHS Compliant] Model Frequency range (MHz) Impedance (k) min. Rated voltage DC (V) Rated current (mA) DC resistance (/Line) max. ST-104A4 ST-204A1 ST-204A3 ST-204A4 0.5 to 7 7 to 100 7 to 40 7 to 40 3.0 (at 0.5 MHz) 0.25 (at 10 MHz) 1.0 (at 7 MHz) 0.6 (at 7 MHz) REF 50 50 50 50 500 500 500 500 0.36 0.10 0.17 0.12 • Withstanding voltage: 500VDC (one minute, between lines) Remarks AM band FM band FM band FM band • Insulation resistance: more than 10M (250VDC, between lines) Bottom view Shape and Dimensions/Circuit Diagram 2.54±0.53 *12 max. with ST-104A4 13 max. Operating temperature range (˚C) –20 to +75 –20 to +75 –20 to +75 –20 to +75 *11max. 3.5±1.0 ø0.7 13 max. 7.62±0.5 Circuit diagram Installation Examples 1 5 2 6 3 7 4 8 [mm] Design Examples Installation position Telephone set Rosette Installation at rosette or circuit input/output Terminal (facsimile, card reader, etc.) Telephone line Telephone ST, LFT, HFT Installed filter ST-201 ST-101 ST-201A ST-101A ST-202 ST-101F2 ST-202A ST-101F4 ST-202S ST-110AH SZ-03 ST-110AV ST-110BH ST-110BV ST-104A4 ST-204A1 ST-204A3 ST-204A4 Insertion in Driver/ Receive circuit in telephone Line terminal unit L1 Drv. Installed filter LFT HFT Circuit L2 Telephone Rec. Impedance vs. Frequency Impedance (k) 100 104A4 10 1 204A3 204A4 0.1 204A1 0.01 0.1 1 10 100 500 Frequency (MHz) DC Line Filters VOL.10 24 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode SBT Series [RoHS Compliant] • Tape and Reel Dimensions (see page 39) • T Model Rated voltage DC (V) Rated current (mA) Inductance (1kHz, 70mA) (µH) DC resistance (m) max. Operating temperature range (˚C) Packaging SBT-0208 SBT-0210 SBT-0240 SBT-0260 50 50 50 50 500 500 500 500 8±50% 10±50% 40±35% 60±35% 20 20 34 50 –25 to +70 –25 to +70 –25 to +70 –25 to +70 Bulk (100pcs.) Taping (2000 pcs./ reel x 6), Flat taping (1000pcs./ box x 10) TF Shape and Dimensions SBT-02 3.0 max. 8.7 max. 7.5 max. (ø0.6) 4.5±1.0 5.0±0.5 [mm] Impedance vs. Frequency 10K Impedance () 5K 1K 500 0260 100 50 0240 0210 0208 10 0.1 1 10 100 500 Frequency (MHz) DC Line Filters VOL.10 25 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode SNT Series [RoHS Compliant] • Tape and Reel Dimensions (see page 39) Model Rated current* (A) Inductance (µH) min. DC resistance (m) max. Operating temperature range (˚C) Packaging 3.0 1.5 0.5 3.0 1.5 0.5 1.5 6 13 2.5 10 20 25 35 95 25 45 98 –20 to +60 –20 to +60 –20 to +60 –20 to +60 –20 to +60 –20 to +60 Bulk (100 pcs.) SNT-S10 SNT-S20 SNT-S30 SNT-D10 SNT-D20 SNT-D30 *The rated current is for the wire and it is different from the inductance guaranteeing values. • T Taping (1000 pcs./ reel) • TF Flat taping (SNT-S type: 1000 pcs./ reel), (SNT-D type: 500 pcs./ reel) Shape and Dimensions Design Example 5.0 max. (S type) 6.0 max. (D type) 9.5 max. 5.0±1.0 12.7 max. For noise suppression in the secondary low-voltage power supply circuit (ø0.5) Vcc GND DC power supply circuits 5.0±0.2 [mm] 10K 10K 5K 5K Impedance () Impedance () Impedance vs. Frequency 1K 500 S30 S20 100 50 1K 500 D30 100 D20 50 S10 10 D10 10 1 5 10 50 Frequency (MHz) 100 500 1 5 10 50 100 500 Frequency (MHz) DC Line Filters VOL.10 26 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode Bead Inductors (Lead Type) [RoHS Compliant] Model Rated current DC (A) Impedance () Operating temperature range (˚C) 5 2 (at 1 MHz) 4 (at 1 MHz) 5 (at 1 MHz) 40 (at 10 MHz) –20 to +70 B-01-Series B-02-Series B-03-Series B-06-Series Note: Rated current values are not guaranteed by impedance levels; these values are permissible levels when the lead wire temperature rise is 20˚C. Model Shape Packaging B-01-R B-01-RT B-01-RTF B-01-RS B-01-RTS B-01-RTSF B-01-A B-01-A1 B-01-A2 B-01-AT B-01-ATF B-01-AT1F B-02-R B-02-RT B-02-RTF B-03-R B-03-RT B-06-R-25 B-06-RTF-25 B-06-R-50 B-06-RTF-50 Single-bead, radial-lead Single-bead, radial-lead Single-bead, radial-lead Single-bead, radial-lead Single-bead, radial-lead Single-bead, radial-lead Single-bead, axial-lead Single-bead, axial-lead Single-bead, axial-lead Single-bead, axial-lead Single-bead, axial-lead Single-bead, axial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Double-bead, radial-lead Bulk type (100 pcs./bag) Tape type (2000 pcs./reel) Tape type (2000 pcs./box) Bulk type (100 pcs./bag) Tape type (2000 pcs./reel) Tape type (2000 pcs./box) Bulk type (100 pcs./bag) Bulk type (250 pcs./bag) Bulk type (250 pcs./bag) Tape type (5000 pcs./reel) Tape type (1500 pcs./box) Tape type (2000 pcs./box) Bulk type (100 pcs./bag) Tape type (2000 pcs./reel) Tape type (1500 pcs./box) Bulk type (100 pcs./bag) Tape type (2000 pcs./reel) Bulk type (100 pcs./bag) Tape type (1500 pcs./reel) Bulk type (100 pcs./bag) Tape type (1500 pcs./box) Impedance Characteristics Impedance () 1000 100 10 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 27 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode Shape and Dimensions (5.0) 27±3.0 ø0.65 (Tin coated soft copper wire) 7.0 max. 2.5 max. ø0.65 (Tin coated soft copper wire) (2.5) (5.0) 8.0 max. 15 min. 4.4±0.2 7.5 max. ø0.65 (Tin coated soft copper wire) 2.4 max. ø0.65 (Tin coated soft copper wire) 7.0 max. 2.5 max. 10 max. 8.5 max. 6.0 max. B-06-R-50 Series B-03-R Series ø3.4±0.2 27±3.0 B-01-RS Series 20 min. 4.2 max. 6.0 max. 15 min. 4.4±0.2 13 max. 10±2.0 20 min. 10.5 max. ø0.65 (Tin coated soft copper wire) 10±2.0 B-06-R-25 Series B-02-R Series ø3.4±0.2 6.0 max. B-01-R Series ø0.65 (Tin coated soft copper wire) (5.0) (5.0) (5.0) ø3.4±0.2 B-01-A Series 4.4±0.2 ø0.65 (Tin coated soft copper wire) 67±2.0 ø3.4±0.2 B-01-A1 4.4±0.2 4.5±1.0 (6.5) 12.5±0.8 ø0.65 (Tin coated soft copper wire) ø3.4±0.2 B-01-A2 4.4±0.2 4.5±1.0 (6.5) 10±0.8 ø0.65 (Tin coated soft copper wire) [mm] DC Line Filters VOL.10 28 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode Tape and Reel Dimensions B-01-RT • RTF B-02-RT • RTF/B-03-RT 3.85±0.7 9.0±0.5 3.85±0.7 B-06-RTF-25 B-01-AT • ATF 9.0±0.5 2.5±0.5 5.1±0.7 ø4.0±0.2 18.0 –0.5 11 max . +2.0 1.0 max. 18.0 –0 32.2 max. +1.0 9.0±0.5 12.7±0.3 3.85±0.7 18.0 –0.5 11 max . +1.5 1.0 max. 5.0±0.5 +1.0 12.7±1.0 12.7±1.0 32.2 max. ø4.0±0.2 12.7±0.3 B-01-RTS • RTSF 20 –1.0 12.7±0.3 +1.0 11 max. +2 18.0 –0 1.0 max. 5.0±0.5 ø4.0±0.2 18.0 –0.5 +1.0 18.0 –0.5 9.0±0.5 5.0±0.5 32.2 max. 12.7±1.0 11 max. 32.2 max. 1.0 max. 16±1.0 12.7±1.0 ø4.0±0.2 12.7±0.3 B-06-RTF-50 6.0±1.0 9.0±0.5 +1.0 32.2 max. 11 max . 18.0 –0.5 +2.0 52 –1.0 6.0±1.0 1.0 max. 16±1.0 5.0±0.5 12.7±1.0 5.0±0.5 3.85±0.7 12.7±0.3 ø4.0±0.2 5.0±0.5 B-01-AT1F 6.0±1.0 +1.5 26 –1.0 6.0±1.0 [mm] DC Line Filters VOL.10 29 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode Bead Inductors (Winding Type) [RoHS Compliant] Model Core B-1 B-3 B-4 B-5 B-7 B-8 B-9 B-10 B-6-22B B-6-31B Wire No. of turns Teflon wire (ø0.26 : single) / Color: White Teflon wire (ø0.51 : single) / Color: Red Teflon wire (ø0.26 : single) / Color: White Teflon wire (ø0.26 : single) / Color: White Teflon wire (ø0.32 : single) / Color: Green Teflon wire (ø0.4 : single) / Color: Blue Teflon wire (ø0.4 : single) / Color: Yellow Teflon wire (ø0.4 : single) / Color: Black Soft copper wire (ø0.6) Soft copper wire (ø0.6) B-20F-28 B-20L-48B B-20L-44 B-20L-44 B-20F-28 B-20L-48B B-20L-48B B-20L-48B — — 2T 2T 2T 3T 2T 2T 3T 4T — — 8.0max. a a (ø0.6) 7.62±0.2 B-6-22B 3.0 max. 40±3.0 10.0±0.5 2.5 max. 40±3.0 (ø0.6) Model B-1 B-3 B-4 B-5 B-7 a a 7.62±0.2 13.4 max. 3.0 max.10±0.5 40±3.0 5.08±0.2 a ø0.4 a 5.08±0.2 a=2.54±0.3 B-6-31B (c)max. (Clock pulse oscillating section) 1.5max. B-8,9,10 (a)max. (b)±1.5 1.5max. B-1,3,4,5,7 5.0±2.0 7.0max. Shape and Dimensions (a) 5.5 9 10.5 11 6 (b) 5 5 5 5 5 (c) 9 10 9 9 9 [mm] Impedance vs. Frequency B-1 B-3 1000 Impedance () Impedance () 1000 100 10 100 10 1 1 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 30 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Normal Mode Impedance vs. Frequency B-4 B-5 1000 Impedance () Impedance () 1000 100 10 1 100 10 1 1 10 100 1 1000 Frequency (MHz) B-7 B-8 Impedance () Impedance () 1000 1000 100 10 1 100 10 1 1 10 100 1000 1 Frequency (MHz) 10 100 1000 Frequency (MHz) B-9 B-10 1000 1000 Impedance () Impedance () 100 Frequency (MHz) 1000 100 10 1 100 10 1 1 10 100 1000 1 Frequency (MHz) 10 100 1000 Frequency (MHz) B-6-22B B-6-31B 1000 1000 Impedance () Impedance () 10 100 10 1 100 10 1 1 10 100 Frequency (MHz) 1000 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 31 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type EMC Filter DFD Series [RoHS Compliant] Model Rated voltage DC (V) Rated current DC (A) DC resistance (m) max. DFD-104P DFD-104S 50 50 2.0 2.0 100 100 • Withstanding voltage: 125VDC, 5 sec. between terminal 1 and 2 Operating temperature range (˚C) –25 to +85 –25 to +85 • Insulation resistance: more than 500M (100VDC, one minute) Shape and Dimensions/Circuit Diagram DFD-104P DFD-104S 11 max. 2 8.5 max. 1 (ø0.5) 1 11 max. Circuit diagram 3 2 (ø0.5) Circuit diagram 2 8.5 max. 4 1 4 2 3 7.62±0.3 1 3 104S 4.0 min. 104P 16 max. 4 11 max. 3 7.62±0.3 4.0 min. 4 5.08±0.3 5.08±0.3 [mm] Attenuation Characteristics (Output Impedance and Input Impedance: 50) 80 Attenuation (dB) 70 60 104S 50 40 104P 30 20 10 0 10 100 Frequency (MHz) DC Line Filters VOL.10 32 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DIP Type Tape and Reel Dimensions SBT Series Tape and Reel Dimensions 3.0 max. 1.0 max. (18) 11 max. 32.2 max. 7.5 max. 12.7±1.0 18+2.0 –0 6.35±1.3 5.0±0.5 12.7±0.3 SNT Series Tape and Reel Dimensions 9.5 max. 5.0 max. (S type) +1.0 18 –0.5 +2.0 18–0 1.0 max. 11 max. 12.7 max. 12.7±1.0 5.0±0.5 12.7±0.3 DC Line Filters VOL.10 33 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Power Line SBS9080 Series [RoHS Compliant] • Tape and Reel Dimensions (see page 44) • Precautions (see page 43) Model Rated voltage DC (V) Rated current DC (A) SBS9080-509T SBS9080-524T 50 50 5.0 5.0 • Withstanding voltage: 125V DC for one minute between lines Inductance (at 100KHz) (μH) min. 0.9 2.4 DC resistance (m/line) max. 15 15 Operating temperature range (˚C) –25 to +50 –25 to +50 • Insulation resistance: More than 10M (100V DC, between lines) Shape and Dimensions Circuit Diagram 2 3 4 (0.5) 5.4 max. 1 1 2 3 4 Recommended Land Pattern 8.0±0.2 9.7 max. 8.7 max. 3.0 (6.3) 9.0±0.2 3.0 (7.2) 3.0 (1.5) (1.5) 4.0 [mm] 2.0 4.0 [mm] Impedance vs. Frequency 10000 Impedance () 1000 524T 509T 100 10 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 34 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Power Line SBP Series [RoHS Compliant] • Tape and Reel Dimensions (see page 44) • Precautions (see page43) Model Rated voltage DC (V) Rated current DC (A) SBP-5001T 50 5.0 • Withstanding voltage: 200V DC for one minute between lines 3 4 Operating temperature range (˚C) –25 to +70 Circuit Diagram 5.9 max. 2 DC resistance (m/line) max. 7 • Insulation resistance: More than 10M (100V DC, between lines) Shape and Dimensions 1 Impedance (at 100MHz) () min. 500 1 2 3 4 3.5 Recommended Land Pattern (4.5) 8.2 max. 3.5 2.0 9.2 max. 4.5 [mm] 2.0 4.5 [mm] Impedance vs. Frequency Impedance () 1000 100 10 1 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 35 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Power Line DCM Series [RoHS Compliant] • Tape and Reel Dimensions (see page 46) • Precautions (see page 43) Model Rated voltage （Ｖ） Rated current （A） L（μＨ） min Rdc（mΩ） max Type DCM5-01 DCM5-02 DCM5-03 DCM5-04 50 50 50 50 0.2 0.5 1.0 2.0 2540 520 210 30 3180 510 180 30 EE5 EE5 EE5 EE5 ●Inductance measurement condition : f = 10KHZ 0.1V ※●Insulation resistance : more than 100MΩ(250V DC, 1min, between lines) ●Operating temperature range(℃) : -20 to 110 (includes the selftemp. rise.) Look : By number-of-turns adjustment, to products other than the above-mentioned characteristic is also possible, please consult. ●Common mode winding with section bobbin. ※●Withstanding voltase : 250V DC for one minute between lines. Shape and Dimensions DCM5 Series 7.3 max. 5 4 1 2 3 0.2 5.8 max. 7.0 max. 6 [mm] 0.5 Recommended Land Pattern DCM5 Series Circuit Diagram DCM5 Series 3 1 4 6 9.3 (Top view) 5.9 1.7 1.3 1.85 1.85 [mm] DC Line Filters VOL.10 36 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Power Line Impedance vs. Frequency 100000 Common-mode Normal-mode DCM5-01 100000 10000 Impedance () Impedance () 10000 DCM5-02 1000 100 10 1 1000 100 10 1 0.1 0.001 0.01 0.1 1 10 0.1 0.001 100 0.01 Frequency (MHz) 100000 DCM5-03 100000 1 10 100 DCM5-04 10000 Impedance () Impedance () 10000 1000 100 10 1 0.1 0.001 0.1 Frequency (MHz) 1000 100 10 1 0.1 0.01 0.1 1 Frequency (MHz) 10 100 1 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 37 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Signal Line EMC Chip Filters M-500CT/M-600T Series [RoHS Compliant] • Tape and Reel Dimensions (see page 44-46) • Precautions (see page 43) M-500CT Series Model Rated voltage DC (V) Rated current DC (A) Impedance () min. M-521CT M-522CT M-523CT M-524CT M-532CT M-538CT M-542CT M-543CT 50 50 50 80 50 50 50 50 1.0 1.0 1.5 0.5 0.5 0.1 0.5 1.0 Model Rated voltage DC (V) Rated current DC (A) Impedance () min. DC resistance (m) max. M-608T M-614T M-620T 50 50 50 0.1 0.1 0.1 300 (at 100 MHz) 1000 (at 50 MHz) 1000 (at 30 MHz) 80 120 160 700 200 200 700 450 800 200 700 Operating temperature range (˚C) –25 to +85 –25 to +85 –25 to +85 –25 to +85 –25 to +85 –25 to +70 –20 to +75 –25 to +85 DC resistance (m) max. (at 10 MHz) (at 20 MHz) (at 20 MHz) (at 10 MHz) (at 100 MHz) (at 100 MHz) (at 10 MHz) (at 10 MHz) 100 100 65 100 90 220 120 100 M-600T Series Operating temperature range (˚C) –20 to +80 –20 to +80 –20 to +80 • Insulation resistance: more than 10M (100V DC, between lines) Shape and Dimensions 5 3 4 2 5 3 4 (0.25) 5.6 (0.25) 4.2 (0.2) 5.5 9.0 5.6 9.0 6 4 5 1.2 1 8 2 7 3 6 4 5 1 3 608 2 4 Lot No. 5.6 9.0 tolerance±0.2 5.5 8.9 5.0 max. (0.25) 6.0 max. (0.25) 3.9 ±0.2 3 M-608T, M-614T, M-620T 10.0 7 9.8 8 2 2.54 2.54 2.54 1 Lot No. 5.8 9.0 2.54 2.54 2.54 M-543CT 1.2 Lot No. 3.5 Lot No. . Lot No. M-542CT 1.2 6 7.5 2 1 2.54 2.54 6 7.5 3 1 2.54 2.54 2 5.0 4 2.54 1 M-538CT 1.2 M-532CT 1.2 M-521CT, M-522CT, M-523CT, M-524CT tolerance±0.2 (1.3) (1.5) 9.7±0.5 3.0±0.3 6.0±0.2 [mm] DC Line Filters VOL.10 38 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Common Mode Signal Line Circuit Diagram M-521CT, M-522CT, M-523CT, M-524CT 1 4 2 M-542CT M-532CT, M-538CT 1 6 2 5 3 4 3 M-543CT 1 8 2 7 3 6 4 5 1 8 2 7 3 6 4 5 M-608T, M-614T, M-620T 1 3 2 4 Recommended Land Pattern M-608T, M-614T, M-620T 6.0 14 5.5 5.5 1.2 1.8 1.7 2.543 M-542CT, M-543CT 1.7 2.542 M-538CT, M-532CT 2.54 1.5 M-521CT, M-522CT M-523CT, M-524CT 10 5.5 10 10 [mm] Impedance vs. Frequency M-500CT Series 10K 1K M-542CT M-532CT 100 M-600T Series M-521CT, M-543CT M-524CT Impedance () Impedance () 10K M-522CT, 538CT M-523CT M-538CT 10 1K 620T 614T 608T 100 10 10 100 Frequency (MHz) 1000 10 100 1000 Frequency (MHz) DC Line Filters VOL.10 39 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Precautions Shelf Life Use within 6 months. If the product is used after a storage period of 6 months or longer, confirm its solderability before use. Recommended Soldering Conditions • Soldering irons: Tip temperature: 350±5˚C Duration of heat: approx. 4 seconds • Flow soldering: not suitable • Reflow soldering: Refer to the following temperature profile. • Standard thickness of cream Solder = 150μm ~ 200μm. Recommended reflow profile shown below are data obtained from reflow equipment used at NEC TOKIN. The Solderbility may differ greatly depending on reflow equipment type, reflow condition, land pattern area and the amount of cream Solder. Please check the Solderbility thoroughly before actual reflow operation. Reflow Profile 1 (for SBP-5001T) TEMP. (˚C) 230 210 150 80 to 120 sec. 25 sec. max. Reflow Profile 2 (for lead-free type) TEMP. (˚C) 250 }3 230 150 ‘180 90 }30 30 Max. TIME(sec) DC Line Filters VOL.10 40 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type Tape and Reel Dimensions SBS9080 (1000pcs./reel) Dimensions of indented square-hole plastic tape P0 K D0 [mm] P2 A T2 F B P1 W E T A0 ±0.3 9.5 B0 ±0.3 10.3 W ±0.3 16 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 0.6> = 0.6 T2 7.2> = 7.2 K 7.0> = 7.0 Forward direction W2 [mm] Reel dimensions N 330 100 W1 ±0.5 17.5 W2 25> = 25 N A A W1 SBP-5001T (1000pcs./reel) Dimensions of indented square-hole plastic tape P0 K D0 [mm] P2 F B A ±0.3 9.0 B ±0.3 9.0 W ±0.3 16 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 0.4> = 0.4 T2 5.7> = 5.7 K 5.8> = 5.8 Forward direction P1 A T2 W E T Reel dimensions [mm] W2 N 330 79 W1 +6, –0 16 W2 25> = 25 A N A W1 M-521CT/M-522CT/M-523CT/M-524CT (conforms to EIAJ RC-1009) (1500pcs./reel) Dimensions of indented square-hole plastic tape T1 Sprocket hole [mm] Indented square-hole for fitting chips øD0 F A ±0.3 5.3 B ±0.3 9.5 W ±0.3 16 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 8.0 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 max. 0.6 T2 max. 6.5 K max. 6.4 B B W E K P1 A T2 P2 P0 Forward direction Chip fitted on square-hole W1 Reel dimensions [mm] A ±3.0 330 B ±2.0 79 C ±0.2 13 D ±0.8 21 E ±0.5 2.0 r — 1.0 W1 max. 25 W2 +6, – 0 16 B E C D r A W2 DC Line Filters VOL.10 41 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type M-532CT (conforms to EIAJ RC-1009) (1000pcs./reel) Dimensions of indented square-hole plastic tape T1 Sprocket hole [mm] Indented square-hole for fitting chips øD0 F A ±0.3 7.9 B ±0.3 9.4 W ±0.3 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12.0 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 max. 0.6 T2 max. 6.9 K max. 6.8 B B W E K P1 A T2 P2 P0 Forward direction Chip fitted on square-hole W1 Reel dimensions [mm] A ±3.0 330 B ±2.0 80 C ±0.2 13.0 D ±0.8 21.0 E ±0.5 2.0 r — 1.0 W1 max. 25.0 W2 +6, – 0 16.0 B E C D r W2 A M-538CT (conforms to EIAJ RC-1009) (1500pcs./reel) Dimensions of indented square-hole plastic tape T1 Sprocket hole [mm] Indented square-hole for fitting chips øD0 F A ±0.3 7.9 B ±0.3 9.4 W ±0.3 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12.0 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 max. 0.6 T2 max. 4.6 K max. 4.5 B B W E K P1 A T2 P2 P0 Forward direction Chip fitted on square-hole W1 Reel dimensions [mm] A ±3.0 330 C ±0.2 13.0 D ±0.8 21.0 E ±0.5 2.0 r — 1.0 W1 max. 25.0 W2 +6, – 0 16.0 B E C B ±2.0 80 D r W2 A M-542CT (conforms to EIAJ RC-1009) (1000pcs./reel) Dimensions of indented square-hole plastic tape T1 Sprocket hole [mm] Indented square-hole for fitting chips øD0 F A ±0.3 9.5 B ±0.3 10.5 W ±0.3 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 12.0 P2 ±0.1 2.0 P0 ±0.1 4.0 D0 +0.1, –0 1.5 T1 max. 0.6 T2 max. 7.2 K max. 7.0 B B W E K P1 A T2 P2 P0 Forward direction Chip fitted on square-hole W1 Reel dimensions [mm] A ±3.0 330 C ±0.2 13.0 D ±0.8 21.0 E ±0.5 2.0 r — 1.0 W1 max. 25.0 W2 +6, – 0 17.5±0.5 B E C B ±2.0 100 D r A W2 DC Line Filters VOL.10 42 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 SMD Type M-608T/M-614T/M-620T (conforms to EIAJ RC-1009) (1500pcs./reel) Dimensions of indented square-hole plastic tape T1 Sprocket hole [mm] Indented square-hole for fitting chips øD0 F A ±0.3 6.4 B ±0.3 10.2 W ±0.3 16.0 F ±0.1 7.5 E ±0.1 1.75 P1 ±0.1 8.0 P2 ±0.1 2.0 P0 D0 T1 ±0.1 +0.1, – 0 max. 4.0 1.5 0.6 T2 max. 6.5 K max. 6.4 B B W E K P1 A T2 P2 Forward direction P0 Chip fitted on square-hole W1 Reel dimensions [mm] A ±3.0 330 B ±2.0 79 C ±0.2 13.0 D ±0.8 21.0 E ±0.5 2.0 r — 1.0 W1 max. 25.0 W2 +6, – 0 16.0 G 5.2 H 0.38±0.05 B E C D r W2 A DCM5 Series(2000pcs. /reel) Dimensions of indented square-hole plastic tape ±0.05 4 ±0.1 ±0.1 F 2 [mm] Model 16±0.3 B 8 C 6.3 D 8.3 E 7.5 F 1.75 A E DCM5 Series ‘ B H C D G DC Line Filters VOL.10 43 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 DC Line Filters VOL.10 44 ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2 June 2011. ●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data. ●Please request for a specification sheet for detailed product data prior to the purchase. ●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 9634DCLVOL10E1106E2