Film Chip Capacitor Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold - less construction ■Features Small in size Applicable for reflow soldering ■Recommended Applications Coupling By - pass General purpose ■Explanation of Part Numbers 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage Nominal capacitance Cap. Tol. Suffix Suffix Tape width 1C 16VDC 1H 50VDC 1 100VDC 2 250VDC J ±5% K ±10% 9 V Z 12mm 16mm 24mm ■Specifications Category temp.range Rated voltage Capacitance range Capacitance tolerance 16VDC, 50VDC: - 55 to + 105: 100VDC, 250VDC: - 40 to + 85: 16VDC, 50VDC, 100VDC, 250VDC 0.12 to 0.47 µF (E12) 16VDC 50VDC 0.056 to 0.22 µF (E12) 100VDC 0.012 to 1.0 µF (E12) 250VDC 0.001 to 1.0 µF (E12) 16VDC,50VDC ± 5%(J) 100VDC,250VDC ± 10%(K) (100VDC, C< =0.15 µF ± 5%(J), ± 10%(K)) Withstand voltage Between terminals 16VDC, 50VDC:Rated volt. (VDC)x175% 1 to 5s 100VDC, 250VDC:Rated volt. (VDC)x150% 60s Dissipation factor < = 1.0%(20:,1kHz) C< = 0.33 µF > 3000MΩ • (20:,10VDC, 60s) 16VDC:= > 3000MΩ • (20:,50VDC, 60s) 50VDC:= > 3000MΩ • (20:,100VDC,60s) 100VDC, 250VDC:= C>0.33 µF 16VDC:1000MΩ • µF min. (20:,10VDC, 60s) 100VDC, 250VDC:1000MΩ • µF min. (20:,100VDC,60s) Insulation resistance Reflow soldering Soldering conditions 16VDC, 50VDC:240: max. and 30 sec max. at more than 210˚C (Temp. at cap. surface) 100VDC, 250VDC:230: max. and 30 sec max.at more than 210˚C (Temp.at cap.surface) Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation. Film Chip Capacitor ■Dimensions in mm (not to scale) ■Construction L Size code L E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X Y V U T S H W Element (stacked) Outer electrode 0.35± 0.2 0.35± 0.2 Tol. W Tol. 4.8 3.3 4.8 3.3 4.8 3.3 4.8 3.3 6.0 4.1 ± 0.3 ± 0.2 4.1 6.0 4.1 6.0 4.1 6.0 6.0 4.1 6.0 5.0 7.1 5.0 7.7 ± 0.4 5.5 7.1 6.3 ± 0.4 6.3 9.8 8.0 9.8 ± 0.5 8.0 15.2 15.2 10.0 H Tol. 1.4 2.0 2.4 2.8 1.8 ± 0.2 2.0 2.4 2.8 3.2 ❈ ± 0.3 ❈Refer to the column "Rating, Dimensions & Quantity". ■Taping Specification for Automatic Insertion(Mounting) Refer to the PDF file of taping specifications. ■ Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ± 5 % (J) Cap. (µF) 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 Rated volt. 16VDC Part No ECWU1C124JC9 ECWU1C154JC9 ECWU1C184JC9 ECWU1C224JC9 ECWU1C274JC9 ECWU1C334JC9 ECWU1C394JC9 ECWU1C474JC9 Rated volt. 50VDC Dimensions (mm) L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W H 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 1.4 2.0 2.0 2.4 1.8 2.0 2.4 2.8 Size code E1 E2 E2 E3a D1 D2 D3 D4 Q'ty 3000 2000 Part No ECWU1H563JC9 ECWU1H683JC9 ECWU1H823JC9 ECWU1H104JC9 ECWU1H124JC9 ECWU1H154JC9 ECWU1H184JC9 ECWU1H224JC9 Dimensions (mm) L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 Size code E2 E2 E3a E3 D1 D2 D3 D4 3000 2000 ■Example for Land Dimensions (mm) Electrode Land C A B Size code E1,E2,E3a,E3 D1,D2,D3,D4,D5 B Z X Y V U T S Land dimensions Reflow soldering A B C 2.6 3.8 3.8 4.5 5.1 4.5 7.2 7.2 12.6 12.6 6.6 7.8 7.8 9.0 9.7 9.0 11.9 11.9 17.3 17.3 3.0 3.8 4.6 4.6 5.0 5.7 5.7 7.2 7.2 9.0 Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation. Q'ty 3000 2000 3000 2000 Film Chip Capacitor ■ Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ± 5% (J), ± 10% (K) Cap. (µF) 0.001 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Rated volt. 100VDC Part No Dimensions (mm) L W H Rated volt. 250VDC Size code Q'ty Please use 100VDC rating ECWU(X) ECWU1123MC9 ECWU1153MC9 ECWU1183MC9 ECWU1223MC9 ECWU1273MC9 ECWU1333MC9 ECWU1393MC9 ECWU1473MC9 ECWU1563MC9 ECWU1683MC9 ECWU1823MC9 ECWU1104MC9 ECWU1124MC9 ECWU1154MC9 ECWU1184KC9 ECWU1224KC9 ECWU1274KC9 ECWU1334KC9 ECWU1394KCV ECWU1474KCV ECWU1564KCV ECWU1684KCV ECWU1824KCV ECWU1105KCV ▲ 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.7 7.7 9.8 9.8 9.8 9.8 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 5.0 5.0 5.0 5.0 5.5 5.5 6.3 6.3 6.3 6.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.4 2.8 2.0 2.4 2.9 3.5 3.4 4.0 3.0 3.6 4.3 5.1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D1 D3 D4 Z Z Z Z X X V V V V 3000 2000 3000 2000 1500 1000 Part No ECWU2102KC9 ECWU2122KC9 ECWU2152KC9 ECWU2182KC9 ECWU2222KC9 ECWU2272KC9 ECWU2332KC9 ECWU2392KC9 ECWU2472KC9 ECWU2562KC9 ECWU2682KC9 ECWU2822KC9 ECWU2103KC9 ECWU2123KC9 ECWU2153KC9 ECWU2183KC9 ECWU2223KC9 ECWU2273KC9 ECWU2333KC9 ECWU2393KC9 ECWU2473KC9 ECWU2563KC9 ECWU2683KC9 ECWU2823KC9 ECWU2104KC9 ECWU2124KCV ECWU2154KCV ECWU2184KCV ECWU2224KCV ECWU2274KCV ECWU2334KCV ECWU2394KCV ECWU2474KCV ECWU2564KCZ ECWU2684KCZ ECWU2824KCZ ECWU2105KCZ Dimensions (mm) L 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.1 7.1 9.8 9.8 9.8 9.8 15.2 15.2 15.2 15.2 W 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 5.0 6.3 6.3 6.3 6.3 6.3 6.3 8.0 8.0 8.0 8.0 10.0 10.0 H 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 2.0 2.4 2.8 3.2 3.2 3.8 2.8 3.5 4.1 5.1 3.9 4.8 4.4 5.3 3.7 4.4 4.2 5.1 Size code E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B B Y Y Y Y V V U U T T S S Capacitance tolerance code ❈ Please consult us for capacitance tolerance ± 5%(J). Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation. Q'ty 3000 2000 3000 2000 1500 1000 750 ECWU (C) Type DC100V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics Frequency Characteristics at 1kHz 10 10 Capacitance change(%) Capacitance change(%) 1.0uF 5 From 0.012uF to 1.0uF 0 -5 -10 0.47uF 5 0.10uF 0.047uF 0 0.012uF -5 -10 1 -60 -40 -20 0 20 40 60 80 100120 140 10 1000 10000 Frequency (kHz) Temperature(Dgree C) at 1kHz 10 10 8 8 Dissipation factor(%) Dissipation factor(%) 100 6 4 2 From 0.012uF to 1.0uF 0 1.0uF 6 0.47uF 0.10uF 4 0.047uF 2 0.012uF 0 -60 -40 -20 0 20 40 60 80 100 120 140 1 10 Temperature (Degree C) 100 1000 10000 Frequency (kHz) at DC 100V 10000 1000 1.E+11 From 0.012uF to 0.047uF 1.E+10 1.0uF 1.E+09 1.E+08 1.E+07 Impedance(ohm) Insuration resistance(ohm) 1.E+12 0.0 47 uF 100 0.0 0.1 1.0 u 10 F 12 uF 0u F 0.4 7u F 1 0.1 0.01 1.E+06 -60 -40 -20 0 20 40 60 80 100 120140 Temperature (Degree C) 0.001 1 10 100 1000 10000 100000 Frequency(kHz) ECWU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 3 3 Effective value (A) Effective value (A) 0.68 uF 2 0.068 uF, 0.056 uF 0.039 uF, 0.033 uF 1.0 uF 0.82 uF 0.56 uF, 0.47 uF 2 0.39 uF 0.15 uF 0.082 uF 0.027 uF, 0.022 uF 1 1 0.047 uF 0.018 uF, 0.015 uF 0.33 uF, 0.27 uF 0.012 uF 0.22 uF, 0.18 uF 0.12 uF, 0.10 uF 0 0 1 10 100 1 1000 Permissible voltage Permissible voltage (at sine wave) 10 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.056 0.068 0.082 (at sine wave) 100 Effective value (V) Effective value (V) 1000 Frequency (kHz) Frequency (kHz) 100 100 10 10 uF uF uF uF uF uF uF, 0.047 uF uF uF uF 0.22 uF 0.27 uF 0.33 uF 0.39 uF 0.47 uF 0.56 uF 0.10 uF 0.12 uF 0.68 uF 0.82 uF 1 1 10 100 Frequency (kHz) 1000 1.0 uF 1 1 100 10 Frequency (kHz) 0.15 uF 0.18 uF 1000 * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current value (Aop) is calculated using "nominal capacitance." In fact, it changes by the tolerance of a capacitance value, capacitance change, etc. ECWU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) Pulse Handling Capability (dv/dt) (Max 10000cycles) (Max 10000cycles) Rating Voltage DC 100V Capacitance Value(uF) Code 0.012 123 0.015 Current(0-P ) dv/dt(V/us) (A) Rating Voltage Capacitance Value(uF) Code 3.8 0.10 104 123 4.8 0.12 124 0.018 183 5.8 0.15 154 31.5 0.022 223 7.0 0.18 184 21.6 0.027 273 8.6 0.22 224 dv/dt(V/us) Current(0-P ) (A) 21.0 210 25.2 26.4 120 0.033 333 320 10.6 0.039 393 12.5 0.047 473 15.0 DC 100V 0.27 274 32.4 0.33 334 39.6 0.39 394 39.0 100 0.056 563 17.9 0.47 474 47.0 0.68 683 21.8 0.56 564 39.2 0.82 823 26.2 0.68 684 47.6 70 0.82 824 57.4 1.0 105 70.0 Voltage Derating by Temperature 60 DC Rated Voltage (V) 50 40 30 20 10 0 -60 -40 -20 0 20 40 60 80 100 120140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. ECWU (C) Type DC16V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 10 10 Capacitance change(%) Capacitance change(%) Frequency Characteristics 5 0.47uF 0 0.22uF -5 0.22uF 5 0.47uF 0 -5 -10 -10 -60 -40 -20 0 20 40 60 80 100120 140 Temperature (Degree C) 1 10 100 1000 Frequency (kHz) 10000 10 8 8 Dissipation factor(%) Dissipation factor(%) at 1kHz 10 6 4 2 0.22uF 6 0.47uF 4 2 0.47uF 0.22uF 0 0 -60 -40 -20 0 20 40 60 80 100120140 1 1000 10000 10 100 1000 Frequency (kHz) 10000 10000 1.E+10 0.22uF 0.47uF 1.E+08 Impedance(ohm) Insuration resistance(ohm) at DC 10V 1.E+11 1.E+09 100 Frequency (kHz) Temperature (Degree C) 1.E+12 10 1000 100 10 1 1.E+07 0.1 1.E+06 0.01 -60 -40 -20 0 20 40 60 80 100120 140 Temperature (Degree C) 0.22uF 0.47uF 1 ECWU (C) Type DC16V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible voltage (at sine wave) 100 2 0.47 uF 0.39 0.33 0.27 0.22 0.18 uF uF uF uF uF 0.15 uF 0.12 uF Effective value (V) Effective value (A) 3 10 1 0.27 uF 0.33 uF 0.39 uF 0 10 100 Frequency (kHz) 1000 (Max 10000cycles) Current(0-P ) (A) 0.12 124 0.15 154 0.18 184 10.8 0.22 224 13.2 0.27 274 10.8 0.33 334 0.39 394 15.6 0.47 474 18.8 16 7.2 40 9.0 13.2 DC Rated Voltage (V) DC 16V Code 60 1000 20 Capacitance Value(uF) dv/dt(V/us) 100 Frequency (kHz) Voltage Derating by Temperature Pulse Handling Capability (dv/dt) Rating Voltage 0.47 uF 1 10 0.12 0.15 0.18 0.22 12 8 4 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. uF uF uF uF ECWU (C) Type DC50V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 10 5 0.22uF 0.10uF 0 -5 Capacitance change(%) 10 Capacitance change(%) Frequency Characteristics -10 5 0.22uF 0.10uF 0 -5 -10 -60 -40 -20 0 20 40 60 80 100 120140 1 Temperature (Degree C) 10 100 1000 10000 Frequency (kHz) 10 8 8 Dissipation factor(%) Dissipation factor(%) at 1kHz 10 6 4 2 6 0.22uF 4 0.10uF 2 0.22uF 0.10uF 0 0 -60 -40 -20 0 20 40 60 80 100120 140 1 Temperature (Degree C) 100 1000 10000 1000 10000 Frequency (kHz) at DC 50V 10000 1.E+11 1000 0.22uF 0.10uF 1.E+10 1.E+09 1.E+08 1.E+07 Impedance(ohm) Insuration resistance(ohm) 1.E+12 10 100 0.10uF 10 0.22uF 1 0.1 1.E+06 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature (Degree C) 1 10 100 Frequency (kHz) ECWU (C) Type DC50V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible voltage (at sine wave) 100 2 0.22 uF 0.18 uF 0.15 uF 0.12 uF 0.10 uF 0.082 uF 0.068 uF 0.056 uF 1 Effective value (V) Effective value (A) 3 10 0.056 uF 0.068 uF 0.082 uF 0.10 uF 0.12 uF 0.15 uF 0.18 uF 0.22 uF 0 10 100 1000 1 10 100 Frequency (kHz) Voltage Derating by Temperature Pulse Handling Capability (dv/dt) 60 (Max 10000cycles) DC 50V Capacitance Value(uF) Code 0.056 563 0.068 683 0.082 823 15.6 0.10 104 19.0 0.12 124 15.6 0.15 154 0.18 184 23.4 0.22 224 28.6 dv/dt(V/us) Current(0-P ) (A) 50 10.6 190 130 12.9 19.5 DC Rated Voltage (V) Rating Voltage 1000 Frequency (kHz) 40 30 20 10 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. ECWU (C) Type DC250V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 5 10 From 1000pF to 1.0uF 0 -5 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics -10 5 1.0uF 0.10uF 0 0.010uF 1000pF -5 -10 1 -60 -40 -20 0 20 40 60 80 100 120140 10 Temperature (Degree C) 1000 10000 Frequency (kHz) at 1kHz 10 Dissipation factor(%) 10 Dissipation factor(%) 100 8 6 4 2 From 1000pF to 1.0uF 8 6 1.0uF 0.10uF 4 0.010uF 2 1000pF 0 0 -60 -40 -20 0 20 40 60 80 100120 140 1 10 Temperature (Degree C) 100 1000 10000 Frequency (kHz) at DC 100V 10000 1000 1.E+11 From 1000pF to 0.10uF 1.E+10 1.E+09 1.0uF 1.E+08 Impedance(ohm) Insuration resistance(ohm) 1.E+12 1000pF 100 0.010uF 10 1.0uF 1.E+07 0.1 1.E+06 0.01 -60 -40 -20 0 20 40 60 80 100120 140 Temperature (Degree C) 0.10uF 1 1 10 100 1000 10000 100000 Frequency (kHz) ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 1 3 0.027 uF 0.010uF, 8200pF 0.022 uF 0.018 uF 0.5 5600pF, 4700pF 0.015 uF 0.012 uF Effective value (A) Effective value (A) 0.68 uF, 0.39uF 1.0 uF 0.82 uF 0.18uF, 0.27uF 2 0.47 uF 0.12 uF, 0.15uF 0.56 uF 0.33 uF 0.22 uF 6800 pF 1 3900 pF 3300 up 2700 pF 2200 pF 1800 pF 1500 pF 1200 pF 1000 pF 0.10 uF 0.056 0.047 0.033 0.039 uF uF uF uF 0.068uF, 0.082uF 0 100 10 1 0 0.1 1000 1 10 Permissible voltage 1000 Permissible voltage (at sine wave) (at sine wave) 100 1000pF 10 10 0.033 uF ~ 0.027 uF Effective value (V) 100 ~ Effective value (V) 100 Frequency (kHz) Frequency (kHz) 1 1 1.0 uF 0.1 0.1 1 10 Frequency (kHz) 100 1000 0.1 0.1 1 10 Frequency (kHz) 100 * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. 1000 ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Voltage Capacitance Value(uF) Code Capacitance Value(uF) Code 0.0010 102 0.62 0.039 393 9.36 0.0012 122 0.74 0.047 473 11.28 0.0015 152 0.92 0.056 563 13.44 0.0018 182 1.11 0.068 683 dv/dt(V/us) Current(0-P ) (A) Rating Voltage dv/dt(V/us) 240 Current(0-P ) (A) 16.32 615 DC 250V 0.0022 222 1.35 0.082 823 19.68 0.0027 272 1.66 0.10 104 24.00 0.0033 332 2.03 0.12 124 28.80 0.0039 392 2.40 0.15 154 28.50 0.0047 472 1.69 0.18 184 0.0056 562 2.02 0.22 224 41.80 0.0068 682 2.45 0.27 274 31.05 0.0082 822 2.95 0.33 334 DC 250V 190 34.20 37.95 115 0.010 103 3.60 0.39 394 44.85 0.012 123 4.32 0.47 474 54.05 0.015 153 5.40 0.56 564 36.40 0.018 183 6.48 0.68 684 360 44.20 65 0.022 223 7.92 0.82 824 53.30 0.027 273 9.72 1.0 105 65.00 0.033 333 11.88 DC Rated Voltage (V) 300 Voltage Derating by Temperature 250 200 150 125 100 50 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance.