COMMON MODE CHOKE CATALOG Suited for LAN and Telecom Applications TABLE of CONTENTS Common Mode Chokes for Datacom Applications Surface Mount Common Mode Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2–6 Through Hole Common Mode Chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7–12 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 1 G002.K (5/09) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Reduces radiated EMI emissions Filters common mode noise for EMI reduction Common mode attenuation from 100 kHz to 1 GHz Tape & Reel packaging available for surface mount parts* Electrical Specifications @ 25°C Primary Inductance OCL 100 KHz (µH MIN) Common Mode Attenuation (db TYP) Part Number No. of Ports PE-68624 PE-65855 B2013 B4003 23Z87SM PE-65857 PE-68627 T8003 23Z4000SMD PE-65854 23Z104SM PE-67540 PE-65853 23Z106SM 2 2 2 2 3 4 4 4 4 4 4 4 4 6 47 4700 6300 4700 69 22.5 24 33 36 47 68 100 4700 68 11 41 46 42 9 7 8 9 7 3 8 14 40 8 27 43 47 41 24 20 21 13 23 19 22 33 51 22 40 49 43 48 31 30 32 32 35 32 28 44 38 29 44 39 32 38 30 37 36 32 38 36 28 48 30 30 42 34 25 33 29 38 37 30 38 35 27 49 25 30 36 26 29 21 27 34 36 27 36 29 25 44 20 29 26 20 21 22 21 24 30 16 29 12 20 34 14 24 17 20 14 23 16 13 20 17 24 6 15 29 13 19 PE-69011 23Z105SM 23Z109SM T8008 8 8 10 16 36 68 7.5 47 8 8 4 7 24 24 9 27 36 30 20 40 39 29 25 44 35 27 26 42 29 24 24 36 18 16 16 26 11 11 11 — 1 MHz 10 MHz 30 MHz 50 MHz 100 MHz 300 MHz 500 MHz DCR (Ω MAX) Page Number Mech & Schem — 12 16 17 — — — 13 — — — 20 — — 0.40 1.0 1.0 1.0 0.20 0.22 0.25 0.20 0.50 0.40 0.20 0.60 1.20 0.20 2 4 3 6 4 4 4 6 5 3 5 4 3 5 — — — — 0.35 0.20 0.20 0.40 3 5 5 6 1 GHz * When ordering Tape & Reel packaging, add a “T” at the end of the part number (i.e. PE-65738T or 23Z106SMT). NOTE: Additional common mode chokes are available. Please contact Applications Engineering. Mechanical PE-68624 Schematic .265 6,73 .340 MAX 8,64 .100 2,54 PE-68624 4x .100 2,54 .200 5,08 .260 MAX 6,60 PE-68624 .080 2,03 .045 1,14 1 6 3 4 SUGGESTED PAD LAYOUT Weight . . . . . . . . . . . . . 0.17 grams Tape & Reel . . . . . . . . . . . 1500/reel Tube . . . . . . . . . . . . . . . . . . 85/tube .098 MAX 2,49 .004/0,100 6 SURFACES USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 2 G002.K (5/09) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic PE-69011 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . 0.83 grams Tape & Reel . . . . . . . .900/reel Tube . . . . . . . . . . . . . . 40/tube PE-65853 .030 0,76 10 .720 MAX 18,30 .760 .520 19,30 13,20 .200 5,08 6 1 .600 15,24 .530 13,46 PE-65853 DATE CODE .100 2,54 5 .400 10,16 SUGGESTED PAD LAYOUT .550 MAX 13,97 .010 / .020 0,25 / 0,51 .390 9,91 MAX .200 5,08 .072 1,83 .004/0,100 8 Surfaces 1 2 3 4 5 6 7 8 .050 TYP 1,27 .120 TYP 3,05 .100 2,54 PE-69011 16 15 14 13 12 11 10 9 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . . 4.0 grams Tape & Reel . . . . . . . .150/reel Tube . . . . . . . . . . . . . . 35/tube PE-65853 10 9 8 7 6 1 2 3 4 5 .040 / .050 1,01 / 1,27 B2013 B2013 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 1 8 Weight . . . . . . . . . . 9.5 grams Tray . . . . . . . . . . . . . . .30/tray PE-65854 .070 1,78 .050 1,27 .340 MAX 8,64 .285 7,24 1 8 PE-65854 4 DATE CODE COUNTRY OF ORIGIN .100 2,54 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .300 7,62 .360 MAX 9,14 .100 2,54 5 .270 6,86 SUGGESTED PAD LAYOUT .098 MAX 2,50 4 5 Weight . . . . . . . . . . 0.3 grams Tape & Reel . . . . . . 1500/reel Tube . . . . . . . . . . . . . . 60/tube PE-65854 4 5 3 2 1 6 7 8 .004/0,100 8 Surfaces USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 3 G002.K (5/09) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic PE-65855 PE-65855 1 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . 0.69 grams Tape & Reel . . . . . . . 800/reel Tube . . . . . . . . . . . . . 40 /tube PE-65857, PE-67540 8 .600 MAX 15,30 5 .400 .475 MAX 10,20 12,10 PE-6XXXX DATA CODE COUNTRY OF ORIGIN 1 .050 TYP 1,27 .120 3,05 .030 0,76 4 .640 .400 16,30 10,20 .100 TYP 2,54 .300 7,62 .475 MAX 12,1 .004/0,100 8 Surfaces .010 / .020 0,25 / 0,51 PE-68627 PE-68627 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .300 7,62 .100 2,54 .355 MAX 9,02 DATE CODE COUNTRY OF ORIGIN .100 2,54 .270 6,86 SUGGESTED PAD LAYOUT 5 PE-67540 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 .070 1.78 .285 7,24 8 PE-65857 .040 / .050 1,01 / 1,27 .050 1,27 .345 MAX 8,76 1 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . . . . . . 2.0 grams Tape & Reel . . . . . . . . . . . 250/reel Tube . . . . . . . . . . . . . . . . . .40/tube .340 MAX 8,64 .100 2,54 .085 2,16 2 3 Weight . . . . . . . . . . 0.3 grams Tape & Reel . . . . . . 1500/reel Tube . . . . . . . . . . . . . . 55/tube PE-68627 1 8 2 7 3 6 4 5 .207 MAX 5,26 .004/0,100 8 Surfaces .100 2,54 23Z87SM Fil-Mag .050 1,27 .080 2,03 Date Code Country of Origin .018 TYP 0,46 .230 5,84 .030 0,76 .100 2,54 23Z87SM 6 5 4 SUGGESTED PAD LAYOUT .265 6,73 .215 5,46 .005/.010 0,13/0,25 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .400 .260 10,16 6,60 23Z87SM .050 TYP 1,27 0°-8° Weight . . . . . . . . . . 0.5 grams Tape & Reel . . . . . . . 750/reel Tube . . . . . . . . . . . . . 100/tube 1 2 3 .020 MIN 0,51 .360 9,14 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 4 G002.K (5/09) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical .100 2,54 23Z104SM .050 1,27 .080 2,03 Date Code Country of Origin .018 TYP 0,46 .230 5,84 .030 0,76 .265 6,73 Weight . . . . . . . . . . 0.5 grams Tape & Reel . . . . . . . 750/reel Tube . . . . . . . . . . . . . 100/tube 0°-8° 23Z105SM, 23Z106SM .350 8,89 23Z10XSM Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .070 1,78 Date Code Country of Origin .030 0,76 .018 TYP 0,46 .450 11,43 1 2 3 4 23Z106SM 23Z105SM 16 15 14 13 12 11 10 9 16 15 1 2 3 4 5 6 7 8 1 2 13 12 10 9 SUGGESTED PAD LAYOUT .265 6,73 .215 5,46 23Z105SM 23Z106SM Weight . . . . . . . . . . 0.8 grams . . . . 1.0 grams Tape & Reel . . . . . . . 750/reel . . . . . 750/reel Tube . . . . . . . . . . . . . . 50/tube . . . . . .50/tube 0°-8° .020 MIN 0,51 .360 9,14 .050 TYP 1,27 .350 8,89 4 5 7 8 .450 11,43 23Z109SM Fil-Mag .050 1,27 .460 11,68 .280 7,11 23Z109SM .090 2,29 Date Code Country of Origin .600 15,24 SUGGESTED PAD LAYOUT .018 TYP 0,46 .300 7,62 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 .100 2,54 .540 .380 13,72 9,65 23Z4000SMD Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .080 2,03 .030 0,76 018 . TYP 0,46 SUGGESTED PAD LAYOUT .100 TYP 2,54 23Z4000SMD 8 7 6 5 .395 10,03 .270 6,86 .300 7 62 23Z109SM .030 MIN 0,76 .420 10,67 23Z4000SMD .005/.010 0,13/0,25 Weight . . . . . . . . . . 1.3 grams Tape & Reel . . . . . . . 500/reel Tube . . . . . . . . . . . . . . 38/tube 0°-8° .050 TYP 1,27 .450 11,43 .600 15,24 .030 0,76 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .295 7,49 .215 5,46 5/.010 3/0,25 6 5 .050 1,27 .400 .260 10,16 6,60 Fil-Mag .005/.010 0,13/0,25 8 7 .020 MIN 0,51 .360 9,14 .050 TYP 1,27 .150 3,81 23Z104SM SUGGESTED PAD LAYOUT .215 5,46 .005/.010 0,13/0,25 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .400 .260 10,16 6,60 23Z104SM Schematic 0°-8° Weight . . . . . . . . . . 2.1 grams Tape & Reel . . . . . . . 350/reel Tube . . . . . . . . . . . . . . 38/tube 1 2 3 4 .020 MIN 0,51 .500 12,70 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 5 G002.K (5/09) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic .300 7,62 T8003 .100 2,54 .075 1,90 T8003 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .340 8,64 T8003 Date Code Country of Origin .045 1,14 .018 0,46 TYP .265 6,73 .450 11,43 .215 5,46 .210 5,335 0°-8° .004/0,10 8 Surfaces .100 3X TYP 2,54 Weight . . . . . . . . . 0.84 grams Tape & Reel . . . . . . . 750/reel Tube . . . . . . . . . . . . . 100/tube T8055 1.50 3,81 .075 1,90 .050 1,27 .290 MAX 7,37 .030 0,76 B4003 .004 / 0,10 8 SURFACES 8 B4003 Country of Origin 1 .100 2,54 .345 MAX 8,76 4 .050 1,27 .070 1.78 SUGGESTED PAD LAYOUT Weight . . . . . . . . . . 1.0 grams Tape & Reel . . . . . . . 425/reel Tube . . . . . . . . . . . . . . 50/tube .300 7,62 MAX T8008 1 1.125 MAX 28,58 .640 MAX 16,26 T8008 DATE CODE COUNTRY OF ORIGIN .950 24,13 1 2 3 4 4 5 1 8 .285 7,24 .004/0,10 8 Surfaces .050 19X 1,27 6 5 B4003 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .270 6,86 5 Date Code .050 1,27 TYP .300 7,62 .355 MAX 9,02 .100 2,54 8 7 Weight . . . . . . . . . . 0.2 grams Tape & Reel . . . . . . 1750/reel Tube . . . . . . . . . . . . . . 80/tube .150 MAX 3,81 .035 0,89 T8055 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .340 .190 8,64 4,83 .240 MAX 6,10 Date Code Rev Country of Origin 8X 1 2 3 4 .020 MIN 0,51 .360 9,14 .300 7,62 T8055 8 7 6 5 40X .018 0,46 .090 40X 2,29 .050 1,27 19X .050 = .950 1,27 24,13 .480 12,19 .030 40X 0,77 .485 12,32 .230 MAX 5,84 0° 8° .010 0,25 .004/0,10 40 Surfaces Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . . 4.0 grams Tape & Reel . . . . . . . 250/reel Tube . . . . . . . . . . . . . . 15/tube .045 40X 1,14 NOTE: The common mode test circuit for surface mount is the same as for through hole and is on the back page. 2 3 5 6 7 8 10 11 12 13 15 16 17 18 20 T8008 40 39 38 36 35 34 33 31 30 29 28 26 25 24 23 21 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 6 G002.K (5/09) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Reduces radiated EMI emissions Filters common mode noise for EMI reduction Common mode attenuation from 100 kHz to 1 GHz Tube packaging available for through hole parts Electrical Specifications @ 25°C Part Number No. of Lines Primary Inductance OCL (µH MIN) PE-65944 PE-67531 B2005 PE-65554 PE-68002 23Z104 PE-67539 PE-65542 PT5039 J0010D11 PE-65950 PE-65541 PE-68613 2 2 2 4 4 4 4 4 4 4 4 4 4 24 140 9000 24 68 85 140 1000 3600 — 4700±30% 6000 3290 Common Mode Attenuation (dB TYP) 100 kHz 1 14 47 — 7 8 14 28 42 9 40 44 40 DCR ( MAX) Page Number Mech & Schem 0.30 0.60 1.0 0.30 0.35 0.20 0.60 0.70 0.50 0.50 1.00 1.40 1.00 8 9 10 8 9 10 9 8 8 10 8 8 10 1 MHz 10 MHz 30 MHz 50 MHz 100 MHz 300 MHz 500 MHz 1 GHz 14 28 32 33 28 13 5 — 34 45 49 50 47 38 32 25 47 41 30 22 33 21 15 15 21 32 38 39 34 24 13 — 24 37 41 42 40 31 27 — 23 29 29 28 25 17 11 — 33 44 48 48 43 33 28 19 41 42 32 22 — — — — 43 42 32 27 17 15 9 13 13 32 35 35 29 13 24 19 51 37 28 23 20 — — — 54 33 32 29 — — — — — — — 51 37 28 23 20 Mechanical Schematic PE-65541, PE-65542, PE-65950 .558 1 3 5 7 MAX PE-65XXX DATE CODE COUNTRY OF ORIGIN .200 5,08 2 4 .558 MAX 6 8 .400 .400 CL Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 CL BOTTOM VIEW .400 MAX 10,16 Weight . . . . . . . . . . 0.38 grams Tube . . . . . . . . . . . . . . . 35/tube PE-65541 PE-65542 PE-65950 1 3 5 7 2 4 6 8 .130 3,30 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 7 G002.K (5/09) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic PE-65554 .100 2,54 .595 MAX 15,11 8 7 6 PE-65554 5 .480 MAX 12,2 PE-65554 DATE CODE COUNTRY OF ORIGIN 1 2 3 CL 4 .300 7,62 BOTTOM VIEW CL 8 7 6 5 Weight . . . . . . . . . . . 2.5 grams Tube . . . . . . . . . . . . . . . 35/tube .300 MAX 7,62 .300 7,62 PT5039 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 1 2 3 4 .130 3,30 .502 12,75 .300 7,62 .431 10,96 PT5039 COUNTRY CODE DATE CODE .138 3,50 .003 8X Æ 0,08 .006 0,15 .520 13,20 SEATING & GAUGE .002 PLANE 0,05 .050 1,27 .400 10,16 PT5039 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . . . . 2.5 grams Tube . . . . . . . . . . . . . . . 35/tube 4X .100 2,54 .200 5,08 8 7 6 5 1 2 3 4 PE-65944 6 5 PE-65944 1 DATE CODE COUNTRY OF ORIGIN 2 .350 8,89 MAX Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .500 12,70 MAX .250 6,35 MAX .130 3,30 .400 10,2 PE-65944 1 2 5 6 Weight . . . . . . . . . . 1.07 grams Tube . . . . . . . . . . . . . . . 30/tube .200 5,08 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 8 G002.K (5/09) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic PE-67539 .300 7,62 .500 12,70 MAX 8 .500 MAX 12,70 .100 2,54 5 PE-67539 .300 7,62 PE-675XX DATE CODE Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 COUNTRY OF ORIGIN 1 4 BOTTOM VIEW .375 9,53 MAX .120 3,05 .300 7,62 Weight . . . . . . . . . . . 2.4 grams Tube . . . . . . . . . . . . . . . 40/tube 8 7 6 5 1 2 3 4 .020/.025 0,51/0,64 PE-67531 .400 10,16 .200 5,08 .100 2,54 BOTTOM VIEW PE-67531 .350 8,89 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 PE-67531 2 3 DATE CODE COUNTRY OF ORIGIN Weight . . . . . . . . . . 0.76 grams Tube . . . . . . . . . . . . . . . 40/tube .300 7,62 .120 3,05 1 4 4 X .020 0,51 PE-68002 .400 MAX 10,16 PE-68002 PE-68002 DATE CODE COUNTRY OF ORIGIN .400 MAX 10,16 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Weight . . . . . . . . 1.4 grams Tube . . . . . . . . . . . . 50/tube .300 MAX 7,62 .300 7,62 .135 3,43 .100 2,54 8 7 6 5 1 2 3 4 .300 7,62 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 9 G002.K (5/09) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical Schematic B2005 .400 MAX 10,16 B2005 1 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 6 10 Date Code Country of Origin B2005 10 6 5 .500 MAX 12,70 Weight . . . . . . . . 3.7 grams Tube . . . . . . . . . . . . 40/tube 1 5 .500 MAX 12,70 .130 3,30 .400 10,16 4X Æ.025 0,64 .300 7,62 23Z104 Fil-Mag 23Z104 DATE CODE COUNTRY OF ORIGIN Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .018 TYP 0,46 .265 6,73 .450 11,43 .250 MIN 6,35 Weight . . . . . . . . . . . 1.0 grams Tube . . . . . . . . . . . . . . . 50/tube 23Z104 8 7 6 5 1 2 3 4 .125 –.020 3,18 –.0,51 15 MIN 38 .100 TYP 2,54 .340 –.020 8,64 –.0,51 .300 –.010 7 62 0 25 PE-68613 12,83 1 PE-68613 .400 MAX 10,16 5 4 2 .100 2,54 10 9 7 . 400 – .010 10,16 0,25 .500 MAX 12,7 .115 .010 – 2,92 0,25 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,127 .300 .010 7,62 – 0,25 DATE CODE COUNTRY OF ORIGIN 8X 6 PE-68613 10 9 7 6 . 200 – .010 5,08 0,25 Weight . . . . . . . . . . . 3.5 grams Tube . . . . . . . . . . . . . . . 40/tube 1 2 4 5 o .020 .003 – 0,51 0,08 USA 858 674 8100 • Germany 49 7032 7806 0 • Singapore 65 6287 8998 • Shanghai 86 21 32181071 • China 86 755 33966678 • Taiwan 886 3 4643715 www.pulseeng.com 10 G002.K (5/09) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications J0010D11 - Filtered Connector Dimensions: Inches .010 Unless otherwise specified, all tolerances are mm 0,25 Common Mode Test Circuit for Surface Mount and Through Hole 50 Ω D.U.T. 50 Ω Test Notes: 1. Network analyzer calibrated to compensate for 50 resistors. 2. All windings on a core are connected in parallel for the test. 3. For multi-core chokes, test data is for one core only. The windings on the other core(s) are left unconnected (i.e. open). HP 3577A Network Analyzer For More Information: Pulse Worldwide Headquarters Pulse Europe Einsteinstrasse 1 12220 World Trade Dr. D-71083 Herrenberg San Diego, CA 92128 Germany U.S.A. www.pulseeng.com Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 7032 7806 0 Fax: 49 7032 7806 135 Pulse China Headquarters Pulse North China Pulse South Asia Pulse North Asia B402, Shenzhen Academy of Aerospace Technology Bldg. 10th Kejinan Rd. High-Tech Zone Nanshan District Shenzen, PR China 518057 TEL: 86 755 33966678 FAX: 86 755 33966700 Room 1503 XinYin Building No. 888 YiShan Rd. Shanghai 200233 China 135 Joo Seng Rd. #03-02 PM Industrial Bldg. Singapore 368363 No. 26, Kao Ching Rd. Yang Mei Chen Taoyuan Hsien Taiwan R. O. C. Tel: 86 21 54643211/2 Fax: 86 21 54643210 TEL: 65 6287 8998 FAX: 65 6280 0080 Tel: 886 3 4643715 Fax: 886 3 4641911 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2009. Pulse Engineering, Inc. All rights reserved. www.pulseeng.com 11 G002.K (5/09)