SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Reduces radiated EMI emissions Filters common mode noise for EMI reduction Common mode attenuation from 100 kHz to 1 GHz Tape & Reel packaging available for surface mount parts* Electrical Specifications @ 25°C Part Number No. of Lines Primary Inductance OCL (µH MIN) 2 2 2 2 3 3 4 4 4 4 4 4 4 4 4 6 6 8 8 10 16 47 4700 6300 4700 20 69 22.5 24 33 36 37 47 68 100 4700 21 68 36 68 7.5 47 PE-68624 PE-65855 B2013 B4003 R0003 23Z87SM PE-65857 PE-68627 T8003 23Z4000SMD PE-65738 PE-65854 23Z104SM PE-67540 PE-65853 PE-68602 23Z106SM PE-69011 23Z105SM 23Z109SM T8008 Common Mode Attenuation (dB TYP) 100 KHz 11 41 46 42 6 9 7 8 9 7 8 3 8 14 40 6 8 8 8 4 7 1 MHz 27 43 47 41 14 24 20 21 13 23 21 19 22 33 51 19 22 24 24 9 27 10 MHz 40 49 43 48 27 31 30 32 32 35 28 32 28 44 38 28 29 36 30 20 40 30 MHz 44 39 32 38 30 30 37 36 32 38 28 36 28 48 30 34 30 39 29 25 44 50 MHz 100 MHz 42 36 34 26 25 29 33 21 30 30 29 27 38 34 37 36 30 27 38 36 28 27 35 29 27 25 49 44 25 20 35 36 30 29 35 29 27 24 26 24 42 36 300 MHz 500 MHz 1 GHz 26 17 — 20 20 12 21 14 16 22 23 17 30 28 25 21 16 — 24 13 — 30 20 — 16 17 13 29 24 — 25 22 — 12 6 — 20 15 — 34 29 20 14 13 — 34 29 1 24 19 — 18 11 — 16 11 — 16 11 — 26 — — DCR (Ω MAX) Page Number of Mech. & Schem. 0.40 1.0 1.0 1.0 0.40 0.20 0.22 0.25 0.20 0.50 0.30 0.40 0.20 0.60 1.20 0.35 0.20 0.35 0.20 0.20 0.40 2 4 3 6 2 4 4 4 6 5 3 3 5 4 3 3 5 3 5 5 6 * When ordering Tape & Reel packaging, add a “T” at the end of the part number (i.e. PE-65738T or 23Z106SMT). NOTE: Additional common mode cokes are available. Please contact Applications Engineering. Mechanicals Schematics PE-68624, R0003 .050 1,27 .360 MAX 9,14 .285 7,24 1 .070 1,78 6 PE-68624 or R0003 3 R0003 4 .100 2,54 .200 5,08 .200 5,08 .100 2,54 .260 MAX 6,60 Weight . . . . . . . . . . . . . .0.17 grams Tape & Reel . . . . . . . . . . .1500/reel Tube . . . . . . . . . . . . . . . . . .60/tube .270 6,86 1 6 2 3 5 4 Connect unused pin to logic ground for optimum performance. SUGGESTED PAD LAYOUT PE-68624 .098 MAX 2,50 1 6 3 4 .004/0,100 6 SURFACES US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com G002.G (9/04) 2 SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals Schematics PE-65738, PE-68602, PE-69011 .500 MAX 12,70 .050 1,27 .420 .270 10,67 6,86 16 15 14 13 12 11 10 9 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .275 MAX .370 6,99 9,40 PE-6XXXX COUNTRY OF ORIGIN DATE CODE PE-68602 PE-65738 .350 8,89 .075 1,91 .025 0,64 PE-69011 SUGGESTED PAD LAYOUT Weight . . . . . . . . . .0.83 grams Tape & Reel . . . . . . . .900/reel Tube . . . . . . . . . . . . . .40/tube .018 0,46 TYP .200 MAX 5,08 .350 8,89 .050 TYP 1,27 .073 1,85 PE-65853 1 2 3 4 5 6 7 8 .050 TYP 1,27 .120 TYP 3,05 .100 2,54 .030 0,76 10 .004/0,100 16 SURFACES .040 1,02 .360/.380 9,14/9,65 .015 TYP 0,38 .760 .520 19,30 13,20 .200 5,08 6 .720 MAX 18,30 .600 15,24 .530 13,46 PE-65853 DATE CODE 1 .100 2,54 5 .400 10,16 SUGGESTED PAD LAYOUT .550 MAX 13,97 .010 / .020 0,25 / 0,51 .390 9,91 MAX .200 5,08 .072 1,83 .004/0,100 8 Surfaces B2013 8 .600 15,24MAX .475 MAX 12,07 B2013 Date Code Country ofOrigin 1 .050 1,27 TYP .640 .400 16,26 10,16 4 10 9 8 7 6 Weight . . . . . . . . . .4.0 grams Tape & Reel . . . . . . . .150/reel Tube . . . . . . . . . . . . . .35/tube 1 2 3 4 5 B2013 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: 1 8 .100 2,54 TYP .100 2,54 .085 2,16 .340 8,64 MAX PE-65853 .300 7,62 .030 0,76 5 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .040 / .050 1,01 / 1,27 .120 3,05 .475 MAX 12,07 16 15 14 13 12 11 10 9 SUGGESTED PAD LAYOUT Weight . . . . . . . . . .9.5 grams Tray . . . . . . . . . . . . . . .30/tray 4 5 .010 / .020 0,25 / 0,51 .004/0,10 8 SURFACES .040 / .050 1,02 / 1,27 PE-65854 .070 1,78 .050 1,27 .340 MAX 8,64 1 8 PE-65854 4 DATE CODE COUNTRY OF ORIGIN Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .285 7,24 .100 2,54 .300 7,62 .360 MAX 9,14 .100 2,54 5 .270 6,86 SUGGESTED PAD LAYOUT .098 MAX 2,50 Weight . . . . . . . . . .0.3 grams Tape & Reel . . . . . . .1500/reel Tube . . . . . . . . . . . . . .60/tube PE-65854 4 5 3 2 1 6 7 8 .004/0,100 8 Surfaces US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 3 G002.G (9/04) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals PE-65855 4X Ø .0 4 6 Schematics +.002 /- .000 1 ,1 7 +0,05 /-0,00 CONTACT SURFACE 4 PE-65855 3 .345 8,76 .245 ±.002 6,22 ±0,05 PE-65855 Date Code Country of Origin 1 +.000 /- .010 +0,00 /-0,25 2 Pin 1 Identifier .300 7,62 .15 3,81 .400 10,16 +.000 /- .010 +0,00 /-0,25 .250 MAX 6,35 .004/0,10 .005 WASH AREA 0,13 2 3 8 5 .400 .475 MAX 10,20 12,10 PE-6XXXX DATA CODE COUNTRY OF ORIGIN 1 .050 TYP 1,27 .120 3,05 .030 0,76 .640 .400 16,30 10,20 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: 4 .100 TYP 2,54 .300 7,62 .475 MAX 12,1 Weight . . . . . . . . . . . . . .2.0 grams Tape & Reel . . . . . . . . . . .250/reel Tube . . . . . . . . . . . . . . . . . .40/tube .340 MAX 8,64 .004/0,100 8 Surfaces .010 / .020 0,25 / 0,51 .100 2,54 .085 2,16 PE-68627 PE-65857 PE-67540 8 7 6 5 8 7 6 5 1 2 3 4 1 2 3 4 .040 / .050 1,01 / 1,27 .050 1,27 .345 MAX 8,76 .070 1.78 .285 7,24 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 PE-68627 Dimensions: 1 8 .100 2,54 PE-68627 4 Weight . . . . . . . . .0.69 grams Tape & Reel . . . . . . .800/reel Tube . . . . . . . . . . . . .40 /tube 4 SURFACES PE-65857, PE-67540 .600 MAX 15,30 1 4 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .300 7,62 .355 MAX 9,02 DATE CODE COUNTRY OF ORIGIN .100 2,54 .270 6,86 SUGGESTED PAD LAYOUT 5 Weight . . . . . . . . . .0.3 grams Tape & Reel . . . . . . .1500/reel Tube . . . . . . . . . . . . . .55/tube .207 MAX 5,26 1 8 2 7 3 6 4 5 .004/0,100 8 Surfaces 23Z87SM .100 2,54 Fil-Mag .050 1,27 .080 2,03 Date Code Country of Origin .018 TYP 0,46 .230 5,84 .030 0,76 .100 2,54 23Z87SM 6 5 4 SUGGESTED PAD LAYOUT .265 6,73 .215 5,46 .005/.010 0,13/0,25 Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 Dimensions: .400 .260 10,16 6,60 23Z87SM .050 TYP 1,27 0°-8° Weight . . . . . . . . . .0.5 grams Tape & Reel . . . . . . . .750/reel Tube . . . . . . . . . . . . .100/tube 1 2 3 .020 MIN 0,51 .360 9,14 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com G002.G (9/04) 4 SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals 23Z104SM .100 2,54 .050 1,27 23Z104SM .080 2,03 Date Code Country of Origin .018 TYP 0,46 .230 5,84 .030 0,76 .150 3,81 8 7 6 5 1 2 3 4 SUGGESTED PAD LAYOUT .265 6,73 .215 5,46 .005/.010 0,13/0,25 Inches Dimensions: mm Unless otherwise specified, all tolerances are ± .005 0,13 .400 .260 10,16 6,60 23Z104SM Schematics Weight . . . . . . . . . .0.5 grams Tape & Reel . . . . . . . .750/reel Tube . . . . . . . . . . . . .100/tube 0°-8° .020 MIN 0,51 .360 9,14 .050 TYP 1,27 23Z105SM, 23Z106SM .350 8,89 Fil-Mag .050 1,27 23Z10XSM .070 1,78 Date Code Country of Origin .030 0,76 .018 TYP 0,46 .450 11,43 23Z105SM 23Z106SM 16 15 14 13 12 11 10 9 16 15 1 2 3 4 5 6 7 8 1 2 13 12 10 9 SUGGESTED PAD LAYOUT .265 6,73 .215 5,46 .005/.010 0,13/0,25 Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 Dimensions: .400 .260 10,16 6,60 23Z105SM 23Z106SM Weight . . . . . . . . . .0.8 grams . . . .1.0 grams Tape & Reel . . . . . . . .750/reel . . . . .750/reel Tube . . . . . . . . . . . . . .50/tube . . . . .50/tube 0°-8° .020 MIN 0,51 .360 9,14 .050 TYP 1,27 .350 8,89 23Z109SM 4 5 7 8 .450 11,43 23Z109SM Fil-Mag 23Z109SM Dimensions: .090 2,29 Date Code Country of Origin .600 15,24 SUGGESTED PAD LAYOUT .018 TYP 0,46 .030 0,76 .295 7,49 .215 5,46 .005/.010 0,13/0,25 Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .050 1,27 .460 11,68 .280 7,11 Weight . . . . . . . . . .1.3 grams Tape & Reel . . . . . . . .500/reel Tube . . . . . . . . . . . . . .38/tube 0°-8° 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 .030 MIN 0,76 .420 10,67 .050 TYP 1,27 .450 11,43 .300 7,62 23Z4000SMD .100 2,54 23Z4000SMD .540 .380 13,72 9,65 23Z4000SMD Date Code Country of Origin .600 15,24 .080 2,03 .030 0,76 018 . TYP 0,46 .100 TYP 2,54 .300 7,62 8 7 6 5 Weight . . . . . . . . . .2.1 grams Tape & Reel . . . . . . . .350/reel Tube . . . . . . . . . . . . . .38/tube 1 2 3 4 SUGGESTED PAD LAYOUT .395 10,03 .270 6,86 .005/.010 0,13/0,25 Inches Dimensions: mm Unless otherwise specified, all tolerances are ± .005 0,13 0°-8° .020 MIN 0,51 .500 12,70 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 5 G002.G (9/04) SURFACE MOUNT COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals Schematics .300 7,62 T8003 T8003 .100 2,54 Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .075 1,90 .340 8,64 T8003 Date Code Dimensions: 8 7 6 5 Weight . . . . . . . . .0.84 grams Tape & Reel . . . . . . . .750/reel Tube . . . . . . . . . . . . .100/tube 1 2 3 4 Country of Origin .045 1,14 .018 0,46 TYP .265 6,73 .450 11,43 .215 5,46 .210 5,335 0°-8° .004/0,10 8 Surfaces .100 3X TYP 2,54 .020 MIN 0,51 .360 9,14 .300 7,62 T8055 1.50 3,81 .075 1,90 .050 1,27 .290 MAX 7,37 .340 .190 8,64 4,83 .240 MAX 6,10 T8055 Date Code Rev Country of Origin B4003 B4003 Country of Origin 1 2 3 4 B4003 .100 2,54 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .270 6,86 5 1 .050 1,27 TYP .300 7,62 .355 MAX 9,02 .100 2,54 Date Code 6 5 Weight . . . . . . . . . .0.2 grams Tape & Reel . . . . . . .1750/reel Tube . . . . . . . . . . . . . .80/tube .004 / 0,10 8 SURFACES .035 0,89 8 8 7 .030 0,76 .150 MAX 3,81 8X T8055 Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: .345 MAX 8,76 4 .050 1,27 .070 1.78 4 5 1 8 SUGGESTED PAD LAYOUT Weight . . . . . . . . . .1.0 grams Tape & Reel . . . . . . . .425/reel Tube . . . . . . . . . . . . . .50/tube .300 7,62 MAX .285 7,24 .004/0,10 8 Surfaces T8008 1 1.125 MAX 28,58 .640 MAX 16,26 T8008 DATE CODE COUNTRY OF ORIGIN .050 19X 1,27 40X .018 0,46 .950 24,13 40X .090 2,29 .050 1,27 19X .050 = .950 1,27 24,13 .480 12,19 .030 40X 0,77 Weight . . . . . . . . . .4.0 grams Tape & Reel . . . . . . . .250/reel Tube . . . . . . . . . . . . . .15/tube .485 12,32 .230 MAX 5,84 0° 8° .010 0,25 .004/0,10 40 Surfaces Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 Dimensions: 40X .045 1,14 NOTE: The common mode test circuit for surface mount is the same as for through hole and is on the back page. 2 3 5 6 7 8 10 11 12 13 15 16 17 18 20 T8008 40 39 38 36 35 34 33 31 30 29 28 26 25 24 23 21 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com G002.G (9/04) 6 THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Reduces radiated EMI emissions Filters common mode noise for EMI reduction Common mode attenuation from 100 KHz to 1 GHz Tube packaging available for through hole parts Electrical Specifications @ 25°C Part Number No. of Lines Primary Inductance OCL (µH MIN) PE-65944 23Z107 PE-67531 B2005 23Z87 PE-65554 42Z4000 PE-67501 PE-68002 23Z104 PE-67539 PE-65542 PT5039 J0010D11 PE-65950 PE-65541 PE-68613 PE-64683 23Z106 2 2 2 2 3 4 4 4 4 4 4 4 4 4 4 4 4 6 6 24 68 140 9000 69 24 36 50 68 85 140 1000 3600 — 4700±30% 6000 3290 25 85 Common Mode Attenuation (dB TYP) 100 KHz 1 8 14 47 8 — 8 14 7 8 14 28 42 9 40 44 40 6 8 1 MHz 14 25 34 47 22 21 24 34 24 23 33 41 43 13 51 54 51 18 23 10 MHz 28 33 45 41 29 32 37 45 37 29 44 42 42 32 37 33 37 32 30 30 MHz 32 32 49 30 29 38 40 49 41 29 48 32 32 35 28 32 28 38 29 50 MHz 100 MHz 33 28 30 27 50 47 22 33 28 26 39 34 40 38 50 47 42 40 28 25 48 43 22 — 27 17 35 29 23 20 29 — 23 20 37 32 28 27 300 MHz 500 MHz 1 GHz 13 5 — 18 12 — 38 32 25 21 15 15 20 15 — 24 13 — 30 24 — 20 15 10 31 27 — 17 11 — 33 28 19 — — — 15 9 13 13 24 19 — — — — — — — — — 21 17 — 21 15 — DCR (Ω MAX) Page Number of Mech. & Schem. 0.30 0.20 0.60 1.0 0.20 0.30 0.20 0.30 0.35 0.20 0.60 0.70 0.50 0.50 1.00 1.40 1.00 0.35 0.20 9 11 9 10 10 8 11 9 9 10 9 8 8 12 8 8 11 8 10 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 7 G002.G (9/04) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals PE-64683 Schematics PE-64683 .685 MAX 17,40 12 1 2 7 PE-64683 COUNTRY OF ORIGIN DATE CODE 1 6 .300 MAX 7,62 Weight . . . . . . . . . .0.27 grams Tube . . . . . . . . . . . . . . .30/tube .100 2,54 .500 12,70 3 4 5 6 12 11 10 9 8 7 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .480 MAX 12,19 .130 3,30 .300 7,62 PE-65541, PE-65542, PE-65950 .558 1 3 5 7 MAX PE-65XXX DATE CODE COUNTRY OF ORIGIN .400 .200 5,08 2 4 .558 .400 MAX CL 6 8 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 CL BOTTOM VIEW .400 MAX 10,16 Weight . . . . . . . . . .0.38 grams Tube . . . . . . . . . . . . . . .35/tube PE-65541 PE-65542 PE-65950 1 3 5 7 2 4 6 8 .130 3,30 PE-65554 8 7 6 PE-65554 1 2 3 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 5 DATE CODE COUNTRY OF ORIGIN PE-65554 .100 2,54 .595 MAX 15,11 .480 MAX 12,2 CL 4 .300 7,62 BOTTOM VIEW 8 7 6 5 CL Weight . . . . . . . . . . .2.5 grams Tube . . . . . . . . . . . . . . .35/tube .300 MAX 7,62 .300 7,62 1 2 3 4 .130 3,30 PT5039 .502 12,75 PT5039 PT5039 COUNTRY CODE DATE CODE .138 3,50 .050 1,27 .300 7,62 .431 10,96 .003 8X Æ 0,08 .006 0,15 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 8 7 6 5 1 2 3 4 .520 13,20 SEATING & GAUGE .002 PLANE 0,05 .400 10,16 4X .100 2,54 .200 5,08 Weight . . . . . . . . . . .2.5 grams Tube . . . . . . . . . . . . . . .35/tube US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com G002.G (9/04) 8 THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals PE-65944 5 6 1 DATE CODE COUNTRY OF ORIGIN 2 PE-65944 Schematics .350 8,89 MAX Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .500 12,70 MAX .250 6,35 MAX .130 3,30 PE-65944 1 2 5 6 Weight . . . . . . . . . .1.07 grams Tube . . . . . . . . . . . . . . .30/tube .200 5,08 .400 10,2 PE-67501, PE-67539 .300 7,62 .500 12,70 MAX 8 .500 MAX 12,70 .100 2,54 5 .300 7,62 PE-675XX DATE CODE COUNTRY OF ORIGIN 1 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 PE-67501 PE-67539 8 7 6 5 BOTTOM VIEW .375 9,53 MAX .120 3,05 Weight . . . . . . . . . . .2.4 grams Tube . . . . . . . . . . . . . . .40/tube .020/.025 0,51/0,64 .300 7,62 1 2 3 4 PE-67531 .400 10,16 .200 5,08 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .100 2,54 BOTTOM VIEW .350 8,89 2 3 PE-67531 DATE CODE COUNTRY OF ORIGIN .300 7,62 .120 3,05 PE-68002 PE-67531 Weight . . . . . . . . . .0.76 grams Tube . . . . . . . . . . . . . . .40/tube 1 4 4 X .020 0,51 .400 MAX 10,16 PE-68002 DATE CODE COUNTRY OF ORIGIN PE-68002 .400 MAX 10,16 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .300 MAX 7,62 .300 7,62 .135 3,43 Weight . . . . . . . . .1.4 grams Tube . . . . . . . . . . . .50/tube .100 2,54 8 7 6 5 1 2 3 4 .300 7,62 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 9 G002.G (9/04) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals B2005 6 10 Date Code Country of Origin Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .400 MAX 10,16 B2005 1 Schematics 5 .500 MAX 12,70 .500 MAX 12,70 10 6 Weight . . . . . . . . .3.7 grams Tube . . . . . . . . . . . .40/tube .130 3,30 .400 10,16 23Z87 B2005 1 5 4X Æ.025 0,64 .300 7,62 Fil-Mag 23Z87 23Z87 DATE CODE COUNTRY OF ORIGIN .018 TYP 0,46 .265 6,73 .300 7,62 .250 MAX 6,35 .100 TYP 2,54 .200 ±.010 5,08 ±.0,25 23Z104 1 2 3 Weight . . . . . . . . . . .0.7 grams Tube . . . . . . . . . . . . . . .76/tube .125 ±.020 3,18 ±.0,51 .015 TYP 0,38 6 5 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 .340 ±.020 8,64 ±.0,51 Fil-Mag 23Z104 DATE CODE COUNTRY OF ORIGIN .018 TYP 0,46 .265 6,73 .450 11,43 .250 MIN 6,35 23Z104 .100 TYP 2,54 Fil-Mag 23Z106 DATE CODE COUNTRY OF ORIGIN .018 TYP 0,46 .285 7,24 .800 20,32 .250 MAX 6,35 1 2 3 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 23Z106 16 15 13 12 10 9 Weight . . . . . . . . . . .1.9 grams Tube . . . . . . . . . . . . . . .28/tube .125 ±.020 3,18 ±.0,51 .100 TYP 2,54 .700 ±.010 17,78 ±.0,25 6 5 .340 ±.020 8,64 ±.0,51 .300 ±.010 7,62 ±.0,25 .015 MIN 0,38 8 7 Weight . . . . . . . . . . .1.0 grams Tube . . . . . . . . . . . . . . .50/tube .125 ±.020 3,18 ±.0,51 .015 MIN 0,38 23Z106 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 1 2 4 5 7 8 .340 ±.020 8,64 ±.0,51 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com G002.G (9/04) 10 THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanicals Schematics 23Z107 Fil-Mag 23Z107 .018 TYP 0,46 .265 6,73 .230 5,84 .250 MAX 6,35 1 2 .340 ±.020 8,64 ±.0,51 .100 ±.010 2,54 ±.0,25 42Z4000 4 3 Weight . . . . . . . . . .0.45 grams Tube . . . . . . . . . . . . . .100/tube .125 ±.020 3,18 ±.0,51 .015 TYP 0,38 23Z107 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,13 DATE CODE COUNTRY OF ORIGIN Fil-Mag 42Z4000 DATE CODE COUNTRY OF ORIGIN .500 MAX 12,70 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 .400 MAX 10,16 .250 MAX 6,35 .125 /.150 3,18 / 3,81 .020 0,51 .100 TYP 2,54 .300 7,62 PE-68613 PE-68613 .400 MAX 10,16 2 .505 MAX 12,83 5 4 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .005 0,127 .300 .010 7,62 ± 0,25 DATE CODE COUNTRY OF ORIGIN .100 2,54 10 9 7 . 400 ± .010 10,16 0,25 8X 1 2 3 4 PE-68613 10 9 7 6 6 . 200 ± .010 5,08 0,25 Weight . . . . . . . . . . .3.5 grams Tube . . . . . . . . . . . . . . .40/tube .500 MAX 12,7 .115 .010 ± 2,92 0,25 8 7 6 5 .020 (8 PL) 0,51 .300 7,62 1 Weight . . . . . . . . . . .1.5 grams Tube . . . . . . . . . . . . . . .47/tube 42Z4000 1 2 4 5 o .020 .003 ± 0,51 0,08 US 619 674 8100 • UK 44 1483 401 700 • France 33 3 84 35 04 04 • Singapore 65 6287 8998 • Taiwan 886 2 2698 0228 • Hong Kong 852 2788 6588 • http://www.pulseeng.com 11 G002.G (9/04) THROUGH HOLE COMMON MODE CHOKES Suited for LAN and Telecom Applications Mechanical J0010D11 - Filtered Connector .630 16,00 EMI FINGER .290 7,37 .535 13,59 LEFT LED .850 MAX 21,59 .620 15,75 .135 .020 3,43 0,51 TM .125 .020 3,18 0,51 HOUSING POST JXXXXXXXX SIGNAL PINS RIGHT LED .140 3,56 SHIELD PIN .130 .020 3,30 0,51 .498 12,65 .450 11,43 .398 10,11 Patent Pending Date Code Country of Origin .100 2,54 FRONT .024 0,61 .040 1,02 .128 2X 3,25 HOUSING POST 4X .193 4,90 .425 10,80 .133 3,38 .120 3,05 Dimensions: Inches mm Unless otherwise specified, all tolerances are ± .010 0,25 12 11 10 7 8 .100 2,54 BACK 5 6 3 4 .350 8,89 9 2X .064 SHIELD PIN 1,63 .250 6,35 1 2 .050 1,27 8X .035 0,89 .003 0,08 Common Mode Test Circuit for Surface Mount and Through Hole Test Notes: 50 Ω D.U.T. 50 Ω 1. Network analyzer calibrated to compensate for 50 Ω resistors. 2. All windings on a core are connected in parallel for the test. 3. For multi-core chokes, test data is for one core only. The windings on the other core(s) are left unconnected (i.e. open). HP 3577A Network Analyzer For More Information : UNITED STATES (Worldwide) UNITED KINGDOM (Northern Europe) FRANCE (Southern Europe) SINGAPORE (Southern Asia) TAIWAN, R.O.C. (Northern Asia) HONG KONG (China/Hong Kong) 12220 World Trade Drive San Diego, CA 92128 U.S.A. http://www.pulseeng.com TEL: 858 674 8100 FAX: 858 674 8262 3 Huxley Road Surrey Research Park Guildford, Surrey GU2 5RE United Kingdom TEL: 44 1483 401700 FAX: 44 1483 401701 Zone Industrielle F-39270 Orgelet France TEL: 33 3 84 35 04 04 FAX: 33 3 84 25 46 41 150 Kampong Ampat #07-01/02 KA Centre Singapore 368324 TEL: 65 6287 8998 FAX: 65 6280 0080 3F-4, No. 81, Sec. 1 HsinTai Wu Road Hsi-Chih, Taipei Hsien Taiwan, R.O.C. Tel: 886 2 2698 0228 FAX: 886 2 2698 0948 9/F, Phase 2, Tai Sang Shatin Warehouse Centre 6 Wong Chuk Yeung Street Fotan Shatin, Hong Kong TEL: 852 2788 6588 FAX: 852 2776 1055 DISTRIBUTOR Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2004. Pulse Engineering, Inc. All rights reserved. G002.G (9/04) 12