CLSA Series Current Sensing Chip Resistor • • • • • • • AEC-Q200 Compliant Resistances from 0.01 to 1Ohms Power Rating to 2 Watt Resistance Tolerances to ± 1% TCR’s to ±100 ppm/°C Alumina Substrate for High Power Dissipation Sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 SPECIFICATIONS Type CLSA0402 CLSA0603 CLSA0805 CLSA1206 CLSA2010 CLSA2512 Standard Power Rating (W) 0.0625 0.1 0.125 0.25 0.75 1.0 0.25 0.5 1.0 2.0 “High” Power Rating (W) 0.125 Standard Resistance Range (W) 0.05 to 1.0 0.02 to 1.0 0.01 to 1.0 “High” Resistance Range (W) Temperature Coefficient (depending on ohmic value) 0.05 to 1.0 ±200 to ±400 ppm “High” Temperature Coefficient (depending on ohmic value) ±200 to ±600 ppm ±100 ppm upon request ±200 to ±400 ppm ±200 to ±300 ppm Tolerances 1% / 2% / 5% Operating Temperature range -55 to +155°C Dimensions (LxW) mm [inches] 1.00 x 0.50 [0.04 x 0.02] Packaging (pcs) Tape and Reel 1.60 x 0.80 [0.06 x 0.03] 2.00 x 1.25 [0.08 x 0.05] 10,000 3.10 x 1.55 [0.12 x 0.06] 5,000 5.00 x 2.50 [0.20 x 0.10] 6.30 x 3.10 [0.25 x 0.12] 4,000 Pow er Derating Curve 100 Power (%) 80 60 40 20 0 0 20 40 60 70 80 100 120 140 155 Am bient Tem perature (°C) Ordering Information Part Description: Part Type - Resistance - Tolerance - TCR - Packaging - High/Standard Rating Example: CLSA 2512 0.500Ohms 1% 100ppm HP (Note: If no TCR is specified the highest value will be supplied. Standard Rating will be given if not specified) Riedon Inc. 300 Cypress Avenue 09/13 Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Page 11 CLSA Series Current Sensing Chip Resistor Environmental Characteristics Test Requirement Test Method Temperature Coefficient of Resistance As Spec. -55°C to 125°C, 25°C reference temperature Short Time Overload ±0.5%+0.05Ω RCWV*2.5 or Max. overload voltage for 5 seconds Insulation Resistance >10G Max. overload voltage for 1 minute Load Life ±1.0%+0.05Ω 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” Biased Humidity ±1.0%+0.05Ω 1000hrs 85°C/85% RH 10% of operating power High Temperature Exposure ±0.5%+0.05Ω at +155°C for 1000 hrs Bending Strength As Spec. Bending once for 5 seconds with 3mm Thermal Shock ±0.5%+0.05Ω -55°C/+155°C. 300 cycles with maximum transfer time of 20 seconds. Dwell time 15 minutes air to air Solderability 95% min. coverage 245±5°C for 3 seconds Resistance to Soldering Heat ±0.5%+0.05Ω 260±5°C for 10 seconds Voltage Proof No breakdown or flashover 1.42 times RCWV (RMS) for 1 minute Leaching Individual leaching area <5% Total leaching area <10% 260±5°C for 30 seconds Temperature Cycling ±0.5%+0.05Ω -55°C to +125°C, 1000 cycles Moisture Resistance ±1.0%+0.05Ω 24hrs/cycle Mechanical Shock ±0.25%+0.05Ω Wave form: Tolerance for half sine pulse Peak value of 100g’s. Normal Duration (D) is 6 Vibration ±0.5%+0.05Ω 5 g’s for 20 min., 12 cycles each of 3 orientations, 10-2000 H ESD ±1.0%+0.05Ω Human body, 2KV Flame Retardance No Flame Present Temperature sensing at 500°C, voltage power subjected to 32VDC current clamped up to 500ADC and decreased in 1.0VDC/hour Resistance to Solvents Marking Unsmeared Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. Terminal strength Not broken Force of 1.8kg for 60 second Riedon Inc. 300 Cypress Avenue 09/13 Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Page 12