Thin Film Chip Resistors NTRA Series FEATURES • PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT • EIA STANDARD CASE SIZES (0402 ~ 2512) • AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS • LOW NOISE, THIN FILM (NiCr) CONSTRUCTION • TEMPERATURE RANGE -55°C ~ +155°C • OPTIONAL HIGH POWER RATING (0603 ~ 2010 CASE SIZES) • REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Automotive Grade Resistors RoHS Compliant includes all homogeneous materials *See Part Number System System for Details STANDARD POWER RATING EIA Size Power Rating at 70°C NTRA04 0402 1/16W (0.063W) 25V 50V NTRA06 0603 1/16W (0.063W) 50V 100V NTRA10 0805 1/10W (0.10W) 100V 200V NTRA12 1206 1/8W (0.125W) 150V 300V NTRA20 1210 1/4W (0.25W) 150V 300V 150V 300V 150V 300V Type NTRA25 2010 NTRA50 2512 Max.*1 Max.*2 Working Overload Voltage Voltage 1/4W (0.25W) 1/2W (0.50W) Resistance Tolerance (Code) Temperature Coefficient (ppm/°C) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) Resistance Range (Ω) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) Resistance Values 49.9 ~ 10KΩ 49.9 ~ 100KΩ 10 ~ 49.9KΩ 10 ~ 332KΩ 10 ~ 100KΩ 10 ~ 1MΩ 10 ~ 200KΩ 10 ~ 1MΩ 10 ~ 499KΩ 10 ~ 1MΩ 10 ~ 499KΩ 10 ~ 1MΩ 10 ~ 499KΩ 10 ~ 1MΩ E-24, E-96 & E-192 HIGH POWER RATING Type EIA Size Power Rating at 70°C Max.*1 Max.*2 Working Overload Voltage Voltage NTRA06H 0603 1/10W (0.10W) NTRA10H 0805 1/8W (0.125W) 150V 300V NTRA12H 1206 1/4W (0.25W) 200V 400V NTRA20H 1210 1/3W (0.33W) 200V 400V NTRA25H 2010 1/3W (0.33W) 200V 400V 75V 150V Resistance Tolerance (Code) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) ±0.05% (A) ±0.1% (B), ±0.25 (C), ±0.5 (D), ±1% (F) Note *1 - Maximum allowable continuous Working Voltage for all resistors is the lower of the two values: “Maximum Working Voltage” as specified above or www.lowESR.com Resistance Range (Ω) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) ±25(C), ±50(D) Resistance Values 10 ~ 49.9KΩ 10 ~ 332KΩ 10 ~ 100KΩ 10 ~ 1MΩ 10 ~ 200KΩ 10 ~ 1MΩ 10 ~ 499KΩ 10 ~ 1MΩ 10 ~ 499KΩ 10 ~ 1MΩ E-24, E-96 & E-192 Note *2 - Maximum Overload Voltage for all resistors is the lower of the two values: "Maximum Overload Voltage” as specified above or 2.5 x Power rating (Watts) x Resistance (Ohms) NIC COMPONENTS CORP. www.niccomp.com Temperature Coefficient (ppm/°C) Power rating (Watts) x Resistance (Ohms) www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Thin Film Chip Resistors NTRA Series Power Derating Curve: For operation above 70°C, power rating must be derated according to the following chart: TYPICAL NOISE CHARACTERISTICS 100 0603 0805 1206 1~9 -95dB -95dB -95dB 10 ~ 49 -85dB -85dB -85dB 50 ~ 99 -85dB -85dB -85dB 100 ~ 4.99K -100dB -100dB -105dB 5K ~ 19.9K -100dB -100dB -100dB 20K ~ 1M -90dB -100dB -100dB Percentage of Power Rating Case Size Resistance Value (Ω) 80 60 40 30 20 0 20 40 60 70 80 100 120 140 155 Temperature °C ENVIRONMENTAL CHARACTERISTICS Specification Item Test Method Tol. < 0.05% Teminal Strength Tol. > 0.05% AEC-Q200 Force of 1.8kg for 60 seconds None Broken Moisture Resistance ΔR ±0.05% ΔR ±0.2% Mechanical Shock ΔR ±0.25% ΔR ±0.5% Vibration ΔR ±0.25% ΔR ±0.5% ESD ΔR ±0.1% Flame Retardance No Flame Resistance to solvents Marking unsmeared Temperature Coefficient of Resistance Short Time Overload Insulation Resistance As specified As specified JIS-C-5201-1 4.8, IEC-60115-1 4.8 +25/-55/+25/+125/+25 ΔR ±0.05% ΔR ±0.2% JIS-C-5201-1 4.13, IEC-60115-1 4.13 RCWV x 2.5 or Max Overloading Voltage for 5 Seconds ΔR ±0.2% for High Power JIS-C-5201-1 4.13, IEC-60115-1 4.13 Apply 100Vdc for 1 minute >1000MΩ ΔR ±0.05% Load Life MIL-STD-202 Method 106 MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. MIL-STD-202 Method 204 5 g's for 20 minutes, 12 cycles each in 3 orientations, 10 ~ 2,000Hz AEC-Q200-002 Human body, 2KV AEC -Q200-001 Temperature sensing at 500°C, vltage power subjected to 32VDC, current clamped up to 500ADC and decreased in 1.0VDC/hour MIL-STD-202 Method 215 Add aquesous wash chemical - OKEM Clean or equivalent. Do not use banned solvents ΔR ±0.2% JIS-C-5201-1 4.25, IEC-60115-1 4.25.1 RCWV +70°C, 1.5 hours ON, 0.5 hours OFF Total time 1,000 ~ 1,000 hours >7KΩ ΔR ±0.5% ΔR ±0.5% for High Power ΔR ±0.05% Biased Humidity ΔR ±0.2% >7KΩ ΔR ±0.5% MIL-STD-202F Method 103 Total time 1,000, 85°C, 85%RH at 10% operating power ΔR ±0.5% for High Power 2 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTRA Series Specification Item Test Method Tol. < 0.05% Tol. > 0.05% MIL-STD-202 Method 108 +155°C, 1000 hours ΔR ±0.05% Resistance to Dry Heat Temperature Cycling ΔR ±0.05% ΔR ±0.2% JESD22, Method JA-104 -55°C to +125°C, 1,000 cycles Bending Strength ΔR ±0.05% ΔR ±0.2% JIS-C-5201-1 6.1.4, IEC-60115-1 4.33 Bending Amplitude 3mm for 10 seconds 95% Minimum Coverage Solderability JIS-C-5201-1 4.17, IEC-60115-1 4.17 245°C ±5°C, 3 seconds Resistance to Soldering Heat ΔR ±0.05% ΔR ±0.2% JIS-C-5201-1 4.18, IEC-60115-1 4.18 260°C ±5°C for 10 seconds Thermal Shock ΔR ±0.05% ΔR ±0.25% JIS-C-5201-1 4.18, IEC-60115-1 4.18 -55°C ~ +125°C, 300 cycles Maximum transfer time - 20 sec., dwell time - 15 min. (Air to Air) STANDARD E-24, E-96 AND E-192 VALUES AND 0603 RESISTANCE CODES E-24 Value 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 E-96 Value Code 100 01 110 05 121 09 133 13 147 17 162 21 178 25 196 29 215 33 237 37 261 41 287 45 316 49 348 53 383 57 422 61 464 65 511 69 562 73 619 77 681 81 750 85 825 89 909 93 Value Code 102 02 113 06 124 10 137 14 150 18 165 22 182 26 200 30 221 34 243 38 267 42 294 46 324 50 357 54 392 58 432 62 475 66 523 70 576 74 634 78 698 82 768 86 845 90 931 94 Value Code 105 03 115 07 127 11 140 15 154 19 169 23 187 27 205 31 226 35 249 39 274 43 301 47 332 51 365 55 402 59 442 63 487 67 536 71 590 75 649 79 715 83 787 87 866 91 953 95 Value Code 107 04 118 08 130 12 143 16 158 20 174 24 191 28 210 32 232 36 255 40 280 44 309 48 340 52 374 56 412 60 453 64 499 68 549 72 604 76 665 80 732 84 806 88 887 92 976 96 * Special E192 resistance values are supported on all case sizes of NTRA series. Please review your E192 value requirements with NIC, as special terms apply, and E192 values are supplied without component resistance value marking. MULTIPLIER CODE Code Multiplier A B, b C D, d E 100 101 102 103 104 F 105 G 106 H 107 NIC COMPONENTS CORP. www.niccomp.com X Y Z 10-1 10-2 10-3 www.lowESR.com E-192* Value Value Value Value Value Value 100 147 215 316 464 681 101 149 218 320 470 690 102 150 221 324 475 698 104 152 223 328 481 706 105 154 226 332 487 715 106 156 229 336 493 723 107 158 232 340 499 732 109 160 234 344 505 741 110 162 237 348 511 750 111 164 240 352 517 759 113 165 243 357 523 768 114 167 246 361 530 777 115 169 249 365 536 787 117 172 252 370 542 796 118 174 255 374 549 806 120 176 258 379 556 816 121 178 261 383 562 825 123 180 264 388 569 835 124 182 267 392 576 845 126 184 271 397 583 856 127 187 274 402 590 866 129 189 270 407 597 876 130 191 280 412 604 887 132 193 284 417 612 898 133 196 287 422 619 909 135 198 291 427 626 920 137 200 294 432 634 931 138 203 298 437 642 942 140 205 301 442 649 953 142 208 305 448 657 965 143 210 309 453 665 976 145 213 312 459 673 988 www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 3 Thin Film Chip Resistors NTRA Series PART MARKING 1. No marking on 0402 case size. 2. Marking for 0603 case size: E-24 values and E-96 values: ± 1% (F), ± 0.5% (D), ± 0.25% (C). ± 0.1% (B) tolerances E-192 values: ± 0.1% (B) tolerance (No Marking) CODING FORMULA XX X Example: 10.2kΩ = 102 x 102 Ω = 02C 02 C MARKING EXAMPLES 33.2 Ω = 332 x 10 = 51X 51 X Multiplier Code -1 Resistance Code 3. Marking for 0805, 1206, 2010 and 2512 case sizes: E-24 and E-96 values - ±1%(F), ±0.5% (D), ±0.25%(C), ±0.1% (B) tolerances E-192 values: ±0.1% (B) tolerance (No Marking) 10Ω = 01X 7.5k Ω = 85B 150k Ω = 18D 1 MegΩ = 01E 4 DIGIT MARKING SYSTEM - First 3 digits are the significant figures, the 4th digit is the mulitplier. "R"= decimal point. Examples: 0R10 = 0.10 ohms, 1R00 = 1.0 ohms, 22R1=22.1 ohms, 3320= 332 ohms, 4751=4.75K ohms, 1132=11.3K ohms, 6493=649K ohms PART NUMBER SYSTEM NTRA 10 H B 1003 C TR 1K Q Y F RoHS compliant AEC-Q200 Qualified Optional 1,000 piece reel quantity Tape & Reel Packaging Temperature Coefficient Code: C = ±25ppm, D = ±50ppm Resistance Code: First 3 digits are significant figures (both E-24 and E-96 values), 4th digit is the multiplier, “R” indicates a decimal point. Tolerance Code: B = ± 0.1%, C = ± 0.25%, D = ± 0.5%, F = ± 1% H = Optional High Power Rating Size Code: 04=0402, 06=0603, 10=0805, 12=1206, 20=1210, 25=2010, 50=2512 Series "Y" denotes suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site 4 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Thin Film Chip Resistors NTRA Series DIMENSIONS (mm) Type NTRA04 NTRA06 NTRA10 NTRA12 NTRA20 NTRA25 NTRA50 EIA Size 0402 0603 0805 1206 1210 2010 2512 L 1.00 ± 0.05 1.55 ± 0.10 2.00 ± 0.15 3.05 ± 0.10 3.10 ± 0.15 4.90 ± 0.15 6.30 ± 0.15 W 0.50 ± 0.05 0.80 ± 0.10 1.25 ± 0.15 1.55 ± 0.10 2.40 ± 0.15 2.40 ± 0.15 3.10 ± 0.15 H 0.30 ± 0.05 0.45 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 0.55 ± 0.10 Carrier Tape Material Width (mm) Paper 9.5 ± 1.0 Plastic 13.5 ± 10.0 T 0.20 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.42 ± 0.20 0.40 ± 0.20 0.60 ± 0.30 0.60 ± 0.30 t 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.25 0.35 ± 0.25 0.55 ± 0.25 0.50 ± 0.25 0.50 ± 0.25 TAPING SPECIFICATIONS (1) Availability Type EIA Size NTRA04 NTRA06 NTRA10 NTRA12 NTRA20 NTRA25 NTRA50 0402 0603 0805 1206 1210 2010 2512 Fig. A A A A A B B Qty per Reel (pcs) Standard Optional 10,000 1,000 5,000 1,000 4,000 1,000 (2) PAPER TAPE DIMENSIONS (mm) FIG. A Type EIA Size NTRA04 0402 NTRA06 0603 NTRA10 0805 NTRA12 1206 NTRA20 1210 A 0.70 ± 0.05 1.10 ± 0.05 1.60 ± 0.05 2.00 ± 0.05 2.75 ± 0.05 B 1.16 ± 0.05 1.90 ± 0.05 2.37 ± 0.05 3.55 ± 0.05 3.40 ± 0.05 D E F P0 1.55 ± 0.05 1.75 ± 0.10 3.50 ± 0.05 4.0 ± 0.10 P1 2.0 ± 0.05 4.0 ± 0.10 P2 W 2.0 ± 0.05 8.0 ± 0.1 T 0.40 ± 0.03 0.60 ± 0.03 0.75 ± 0.05 FIG. A P0 E D Cover tape F W B T P2 A P1 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 5 Thin Film Chip Resistors NTRA Series (3) PLASTIC EMBOSSED TAPE DIMENSIONS (mm) FIG. B Type EIA Size NTRA25 2010 NTRA50 2512 A 2.85 ±0.10 3.40 ±0.10 B 5.45 ±0.10 6.65 ±0.10 D E F 1.50 ±0.10 1.75 ±0.10 5.50 ±0.05 P0 P1 4.0 ±0.10 4.0 ±0.1 P2 W T 2.0 ±0.05 12.0 ±0.1 1.0 ±0.20 FIG. B P0 E D Cover tape F W B P2 A T P1 21 0. 8 13∅ ±0.5 ± 60∅ ±2 2 ± .0 0. 5 W2 LAND PATTERN DIMENSIONS (mm) Type NTRA04 NTRA06 NTRA10 NTRA12 NTRA20 NTRA25 NTRA50 EIA Size 0402 0603 0805 1206 1210 2010 2512 A 0.50 0.80 1.00 2.00 2.00 3.60 4.90 B 0.50 1.00 1.00 1.15 1.15 1.40 1.60 C 0.60 ± 0.2 0.90 ± 0.2 1.35 ± 0.2 1.70 ± 0.2 2.50 ± 0.2 2.50 ± 0.2 3.10 ± 0.2 300 B 6 9.0 + 0.5 (0402 ~ 1206) 14 ± 0.5 (2010 ~ 2512) PEAK REFLOW SOLDERING CONDITIONS 260°C 10 Sec. 250 200 1 ~ 5°C/Sec. 1 ~ 5°C/Sec. 150 100 C 11.4 + 1.0 (0402 ~ 1206) 16.4 ± 1.0 (2010 ~ 2512) 180∅ ±3 w1 50 120 Sec. 1 ~ 9°C/Sec. 0 A NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com