SENSITRON 704

SENSITRON
SEMICONDUCTOR
704-15K36T
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
Transient Voltage Suppressor, Unidirectional
FEATURES:
♦
♦
♦
♦
Equivalent Industry Standard Part Numbers –704-15K36T
Designed For MIL-STD-704
28 Volt Power Supply Protection
Can be supplied with JAN/JANTX parts
This series is primarily for use in avionics equipment. It meets all applicable environmental requirements
of MIL-S-19500. These 15kW assemblies are designed typically to operate with a minimum source
impedance of .25 Ohms for transients.
MAXIMUM RATINGS
Rating
Peak Pulse Power
Dissipation
Steady State Power
Dissipation
tclamping
Operating & Storage
Temp.
Forward Surge Current
Duty Cycle
Condition
@ 25 , 1ms
Minimum
-
Maximum
15,000
Units
Watts
-
-
10
Watts
0 Volts to V(BR)
-
< 1x 10 –12
-
-65
+ 150
Second
s
C
1/120 sec. @
25 C
-
-
300
Amps
-
0.01
%
ELECTRICAL CHARACTERISTICS @ 25
Part Number
Reverse StandOff Voltage
(Note 1)
VWM
Volts
(Test Both Polarities)
Maximum
Reverse Leakage
@ Vwm
ID
μA
Minimum
Breakdown
Voltage
@ 10 mA
V(BR)
Volts
Maximum
Clamping
Voltage
@ IPP
Vc
Volts
Maximum
Peak Pulse
Current (Fig. 2)
IPP
Amps
Maximum
Forward Voltage
VF
@ 8.3 msec.
100A
Volts DC
31.5
100
36
51
300
3.0
704-15K36T
Note 1: A device is normally selected according to the reverse “Stand Off Voltage” (VWM) which should be
equal to or greater than the DC or continuous peak operating voltage level. Special Voltages available
from the factory.
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
MECHANICAL CHARACTERISTICS
CASE: Molded Case
TERMINAL: Silver Plated Brass
POLARITY: Cathode terminal marked with a dot
WEIGHT: 38 grams
MOUNTING POSITION: Any
MECHANICAL DIMENSIONS: In Inches / mm
Turret Leads
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
704-15K36T
TECHNICAL DATA
DATA SHEET 561, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 West Industry Court Deer Park, NY 11729 (631) 586 7600, FAX (631) 242 9798 •
• World Wide Web - www.sensitron.com • E-mail Address - [email protected]