STATEK CX1VHT_11

HIGH TEMPERATURE CRYSTALS
High Temperature/Low Frequency
DESCRIPTION
An increasing number of applications require the use of
high-temperature crystals. For these applications, Statek
offers the CX1VHT/CX1HHT, CX4VHT, and CX9VHT
crystals. These crystals are designed to operate at
temperatures up to and including 200ºC, and feature an
expected life in excess of 1,000 hours at these
temperatures. The frequency range offered is 10 kHz to
600 kHz for CX1VHT and CX1HHT crystals, 30 kHz to
250 kHz for CX4VHT crystals, and 32 kHz to 160 kHz for
CX9VHT crystals.
CX1VHT/
CX1HHT
10 kHz - 600 kHz
CX4VHT
CX9VHT
30 kHz - 250 kHz
32 kHz - 160 kHz
FEATURES
DIMENSIONS
High temperature operation up to 200OC
High shock resistance
Hermetically sealed ceramic package
CX1VHT/
CX1HHT
MAXIMUM
APPLICATIONS
Industrial
Downhole instrumentation
CX4VHT
MAXIMUM
CX9VHT
MAXIMUM
DIM
inches
mm
inches
mm
inches
mm
A
0.330
8.38
0.210
5.33
0.170
4.32
B
0.155
3.94
0.085
2.16
0.068
1.73
C (SM1)
0.070
1.78
0.050
1.27
0.038
0.97
Rotary shaft sensors
C (SM5)
0.075
1.90
0.053
1.35
0.040
1.02
Underground boring tools
D
0.055
1.40
0.046
1.16
0.038
0.97
E
0.070
1.78
0.020
0.51
F
0.070
1.78
0.025
0.64
PACKAGE DIMENSIONS
CX1VHT/
CX1HHT
CX4VHT
CX9VHT
CX4VHT
CX9VHT
SUGGESTED LAND PATTERN
CX1VHT/
CX1HHT
10183 Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Storage Temperature
Maximum Process Temperature
Specifications are typical at 25 C unless otherwise noted.
Specifications are subject to change without notice.
O
Frequency Range
-55OC to 125OC
260OC for 20 seconds
See Specifications Table below
Calibration Tolerance
1
Standard Calibration Tolerances at 25oC
See Standard Calibration
Tolerance Table at right
Frequency Range (kHz)
Operating Temperature Range -55 C up to +200 C
O
O
Frequency Stability
Over Temperature2
f(T) - f(To)
Temperature Coefficient (k)
-0.035 ppm/OC²
Aging, first year
5 ppm at 25OC
Shock, survival3
CX1VHT: 1,000 g, 1 ms, 1/2 sine
CX1HHT: 1,000 g, 1 ms, 1/2 sine
CX4VHT: 5,000 g, 0.3 ms, 1/2 sine
CX9VHT: 5,000 g, 0.3 ms, 1/2 sine
Vibration, survival3
f(To)
10-74.9
75-169.9
170-249.9
250-600
±30 ppm
±50 ppm
±100 ppm
±200 ppm
±100 ppm
±100 ppm
±200 ppm
±500 ppm
±1000 ppm
±1000 ppm
±2000 ppm
±5000 ppm
2
= k(T-To)
20 g RMS, 10-2,000 Hz
FREQUENCY SHIFT VS. TIME1
Frequency shift after:
Temp.
1. Tighter frequency calibration available. Contact factory.
2. Where f(T) = Frequency at temperature T
T = Temperature
To = Turnover temperature
fo = Frequency at turnover temperature To
3. Higher shock and vibration available.
1,008 hours 1,824 hours
4,320 hours2
8,760 hours2
(Actual Data) (Actual Data) (Projected Data) (Projected Data)
150°C
1.97 ppm
2.51 ppm
3.30 ppm
175°C
4.80 ppm
5.66 ppm
6.94 ppm
3.94 ppm
7.99 ppm
200°C
29.40 ppm
36.82 ppm
47.61 ppm
56.46 ppm
1. The data listed in this table is for a 32.768 kHz CX4 Statek crystal.
2. The data shown for 4,320 hours and 8,760 hours is data that has been projected
using a curve-fitting method.
PACKAGING OPTIONS
• Tray Pack
• 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet # 10109)
SPECIFICATIONS TABLE1 (Specifications shown are typical unless otherwise noted.)
Typical Motional
Typical for 32.768 kHz at 25 oC
Product1
Frequency Range
Motional
Motional
Resistance Capacitance
R1
C1
Quality Factor
Shunt
CX1VHT
10 kHz to 600 kHz
2.3 fF
53 k
1.7 pF
30 kHz to 250 kHz
70 kΩ
2.3 fF
31 k
1.1 pF
CX9VHT
32 kHz to 160 kHz
100 kΩ
2.2 fF
22 k
1.0 pF
9 pF
Drive Level
Turnover
150 oC
R1
Capacitance Capacitance Temperature
C0
CL2
To
CX4VHT
40 kΩ
Resistance at
Load
200 oC
R1
26°C
55 kΩ
73 kΩ
23°C
100 kΩ
125 kΩ
0.5 µW MAX.
22°C
125 kΩ
160 kΩ
0.5 µW MAX.
0.5 µW MAX. 10-24.9 kHz
1. CX1HHT available from 10 kHz to 600 kHz.
2. Other load capacitance available.
HOW TO ORDER CX1VHT, CX1HHT, CX4VHT and CX9VHT CRYSTALS
CX4V
HT
S
CX1V
CX1H
CX4V
CX9V
HT = High
Temperature
“S” if special or
custom design.
Blank if Std.
SM5
32.786K,
100
Frequency
K = kHz
Calibration
Tolerance
@ 250C
(in ppm)
Terminations*
SM1 = Gold Plated
SM5 = Solder Dipped
(Lead Free)
/
H
Temp. Range:
H = 00C to 2000C
S = Customer
Specified Temp.
Range
*Special terminations per customer requirements will be considered. Contact factory.
10183 Rev C
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com