CPCL, CPCC, CPCP, CPCF Vishay Dale Wirewound/Metal Film Resistors, Commercial Power, Vertical Mount FEATURES • Board space saving due to vertical design • Meets or exceeds requirements of EIA Standard RS-344 • High power to size ratio • Special inorganic potting compound and ceramic case provide high thermal conductivity in a fireproof package • Compliant to RoHS Directive 2002/95/EC STANDARD ELECTRICAL SPECIFICATIONS RESISTANCE RANGE TOLERANCE WEIGHT (typical) GLOBAL HISTORICAL POWER RATING ±% g MODEL MODEL P70 °C W CPCL02 CPCL-2 2 0.01 to 0.10 5, 10 3.5 CPCC02 CPCC-2 2 0.1 to 500 5, 10 3.5 CPCP02 CPCP-2 2 0.1 to 4K 1, 5 3.5 CPCF02 CPCF-2 2 501 to 150K 1, 5, 10 3.5 CPCL03 CPCL-3 3 0.01 to 0.10 5, 10 5.5 CPCC03 CPCC-3 3 0.1 to 800 5, 10 5.5 CPCP03 CPCP-3 3 0.1 to 5K 1, 5 5.5 CPCF03 CPCF-3 3 801 to 150K 1, 5, 10 5.5 CPCL05 CPCL-5 5 0.01 to 0.10 5, 10 6.9 CPCC05 CPCC-5 5 0.1 to 800 5, 10 6.9 CPCP05 CPCP-5 5 0.1 to 5K 1, 5 6.9 CPCF05 CPCF-5 5 801 to 150K 1, 5, 10 6.9 CPCC07/CPCF07 7 0.1 to 50K 5, 10 9.2 CPCC07/CPCF07 (1) CPCL10 CPCL-10 10 0.01 to 0.10 5, 10 14.3 CPCC10 CPCC-10 10 0.1 to 1.5K 5, 10 14.3 CPCP10 CPCP-10 10 0.1 to 8K 1, 5 14.3 Notes • Non-inductively wound types are available on the CPCP series signified by a 1 in the special character on part number such as CPCP0510R00FB321. Max. resistance value will be ½ of the standard CPCP. (1) CPCx07 is only available as CPCC or CPCF High Volume style which is noted by using E66 package code and can be found on datasheet www.vishay.com/doc?30116. TECHNICAL SPECIFICATIONS PARAMETER UNIT CPCLxx CPCCxx CPCPxx ± 300 = 1.0 and above, ± 20 = 10 and above, 100 = 0.05 to 0.1 ± 600 = 0.1 to 0.99 , Temperature Coefficient ppm/°C ±±400 ± 50 = 1.0 to 9.9 = 0.01 to 0.049 ± 400 for CPCC07 ± 90 = 0.1 to 0.99 Short Time Overload 5 x rated power for 5 s Maximum Working Voltage V (P x R)1/2 Operating Temperature Range °C - 65 to + 275 lb 10 minimum Terminal Strength Dielectric Withstanding Voltage VAC 1000 CPCFxx ± 50 all values, ± 400 for CPCF07 - 65 to + 225 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: CPCC0515R00JB32 C P C C 0 5 1 5 R 0 0 J B 3 2 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL (See Standard Electrical Specifications Global Model column for options) R = Decimal K = Thousand R1500 = 0.15 1K500 = 1500 F = ± 1.0 % H = ± 3.0 % J = ± 5.0 % K = ± 10.0 % E32 = Lead (Pb)-free two layer bulk E01 = Lead (Pb)-free skin pack E66 = Lead (Pb)-free bulk (CPCx07 only) (Dash number) (up to 3 digits) From 1 to 999 as applicable B32 = Tin/lead two layer bulk J01 = Tin/lead skin pack Historical Part Numbering example: CPCC-5 15 5 % B32 CPCC-5 HISTORICAL MODEL 15 RESISTANCE VALUE 5% TOLERANCE CODE B32 PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 Document Number: 30218 Revision: 17-Feb-11 For technical questions, contact: [email protected] www.vishay.com 1 CPCL, CPCC, CPCP, CPCF Wirewound/Metal Film Resistors, Commercial Power, Vertical Mount Vishay Dale DIMENSIONS in inches [millimeters] C E + 0.078 0.177 - 0.039 1.98 [4.50 +- 0.991 ] B A D DIMENSIONS in inches [millimeters] C D + 0.043 [1.09] ± 0.005 [0.127] - 0.012 [0.305] GLOBAL MODEL A ± 0.031 [0.794] B ± 0.031 [0.794] CPCL02, CPCC02 CPCP02, CPCF02 CPCL03, CPCC03 CPCP03, CPCF03 CPCL05, CPCC05 CPCP05, CPCF05 0.807 [20.50] 0.433 [11.00] 0.276 [7.01] 0.032 [0.813] 0.197 [5.00] 0.984 [24.99] 0.472 [11.99] 0.315 [8.00] 0.032 [0.813] 0.197 [5.00] 1.003 [25.48] 0.512 [13.00] 0.354 [8.99] 0.032 [0.813] 0.197 [5.00] CPCC07, CPCF07 1.535 ± 0.059 [39.00 ± 1.50] 0.512 ± 0.043 [13.00 ± 1.10] 0.354 ± 0.043 [9.00 ± 1.10] 0.197 + 0.079/- 0.039 [5.00 + 2.0/- 1.0] CPCL10, CPCP10 CPCC10 1.372 [34.85] 0.633 [16.08] 0.485 [12.32] 0.032 ± 0.005 [0.813 ± 0.127] 0.040 [1.02] 0.036 [0.914] E ± 0.040 [1.02] 0.290 [7.37] MATERIAL SPECIFICATIONS CPCC: Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Woven fiberglass (CPCC07 is alumina ceramic) Body: Steatite ceramic case with inorganic potting compound End Caps: Tin plated steel Terminals: Tinned copper CPCP: Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic Body: Steatite ceramic case with inorganic potting compound End Caps: Stainless steel Terminals: Tinned Copperweld® CPCF: Element: Metal film - nickel-chrome alloy (CPCF07 is nickel oxide) Core: Alumina ceramic Body: Steatite ceramic case with inorganic potting compound End Caps: Brass alloy Terminals: Solder-coated copper (CPCF07 is tinned copper) DERATING RATED POWER IN % Part Marking: DALE, model, wattage, value, tolerance, date code CPCL: Element: Self-supporting copper-nickel alloy or nickel-chrome alloy, depending on resistance value Body: Steatite ceramic case with inorganic potting compound Terminals: Tinned copper 120 100 CPCL CPCC CPCP 80 60 40 CPCF 20 0 - 65 - 25 25 75 70 125 175 225 275 AMBIENT TEMPERATURE IN °C Note • CPCC07 and CPCF07 deratings begin at 40 °C in lieu of 70 °C PERFORMANCE TEST CONDITIONS OF TEST CPCP TEST LIMITS CPCC, CPCL, CPCF TEST LIMITS Thermal Shock - 55 °C to + 275 °C (+ 225 °C for CPCF), 5 cycles, 30 min dwell time ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Short Time Overload 5 x rated power for 5 s ± (2.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R Dielectric Withstanding Voltage 1000 VRMS for 1 min ± (0.1 % + 0.05 ) R ± (2.0 % + 0.05 ) R Low Temperature Storage - 65 °C, full rated working voltage for 45 min ± (2.0 % + 0.05 ) R ± (3.0 % + 0.05 ) R Bias Humidity 75 °C, 90 % to 100 % RH, 240 h ± (2.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Load Life 1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF” ± (5.0 % + 0.05 ) R ± (5.0 % + 0.05 ) R Terminal Strength 5 s to 10 s 10 pound pull test ± (1.0 % + 0.05 ) R ± (1.0 % + 0.05 ) R Resistance to Solder Heat Terminal immersed 3.5 s in molten solder up to body ± (1.0 % + 0.05 ) R ± (4.0 % + 0.05 ) R www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 30218 Revision: 17-Feb-11 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000