Transistors IC SMD Type Product specification DTC144EUA ■ Features ● Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors ● The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. ● Only the on/off conditions need to be set for 1 IN operation, making device design easy. 2 GND 3 OUT Equivalent Circuit OUT R1 IN R2 GND OUT IN GND Absolute Maximum Ratings TA=25 Parameter Symbol Rating Unit Supply voltage VCC 50 V Input voltage VIN -10 to 40 V IO 100 IC(Max.) 100 power dissipation PC 200 Junction temperature Tj 150 Storage temperature Tstg -55 to +150 Collector current mA mW Electrical Characteristics TA=25 Parameter Input voltage Output voltage Input current Output current Symbol VI(off) VCC = 5 V , IO = 100 uA VI(on) VO= 0.3 V , IO = 2 mA VO(on) IO =10 mA , II = 0.5 mA II ID(off) DC current gain GI Input resistance R1 Resistance ratio R2/R1 Transition frequency http://www.twtysemi.com Test conditions fT Min. Typ. Max. 0.5 3 Unit V 0.3 V VI = 5 V 0.18 mA VCC = 50 V , VI = 0 V 0.5 ìA 4.7 61.1 k 1 1.2 IO = 5 mA,VO = 5V 0.1 68 32.9 0.8 VCE = 10 V , IE = -5 mA , f = 100MHz [email protected] 250 4008-318-123 MHz 1of 2 Transistors IC SMD Type Product specification DTC144EUA Ordering Information Deviece Packaging Shipping DTC144EUA SOT323 3000/Tape & Reel Marking Information 26 Typlacl Characteristics http://www.twtysemi.com [email protected] 4008-318-123 2 of 2